BS EN 14307-2015 Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification《建筑设备和工业装置用隔热产品 .pdf

1、BSI Standards PublicationBS EN 14307:2015Thermal insulation productsfor building equipmentand industrial installations Factory made extrudedpolystyrene foam (XPS)products SpecificationBS EN 14307:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14307:2015. I

2、t supersedes BS EN 14307:2009+A1:2013 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.Thi

3、s publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 88440 5 ICS 91.100.60 Compliance with a British Standard cannot confer

4、 immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 14307:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1

5、4307 December 2015 ICS 91.100.60 Supersedes EN 14307:2009+A1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification Produits isolants thermiques pour lquipement du btiment et les inst

6、allations industrielles - Produits manufacturs en mousse de polystyrne extrud (XPS) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation This European

7、Standard was approved by CEN on 24 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concer

8、ning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into

9、 its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Ge

10、rmany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE F

11、R NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14307:2015 EBS EN 14307:2015EN 14307:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normati

12、ve references 6 3 Terms, definitions, symbols, units and abbreviated terms . 8 3.1 Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229:2007 8 3.1.2 Additional terms and definitions 8 3.2 Symbols, units and abbreviated terms 9 3.2.1 Symbols and units used in this standard 9

13、3.2.2 Abbreviations used in this standard . 10 4 Requirements 10 4.1 General . 10 4.2 For all applications 11 4.2.1 Thermal conductivity . 11 4.2.2 Dimensions and tolerances 11 4.2.3 Dimensional stability 12 4.2.4 Reaction to fire of the product as placed on the market 13 4.2.5 Durability characteri

14、stics . 13 4.3 For specific applications 13 4.3.1 General . 13 4.3.2 Maximum service temperature . 13 4.3.3 Minimum service temperature . 14 4.3.4 Compressive stress or compressive strength 14 4.3.5 Water vapour diffusion transmission properties 14 4.3.6 Short-term water absorption by partial immers

15、ion . 15 4.3.7 Trace quantities of water soluble ions and the pH-value 15 4.3.8 Release of dangerous substances . 15 4.3.9 Continuous glowing combustion 15 5 Test methods . 15 5.1 Sampling 15 5.2 Conditioning . 15 5.3 Testing 15 5.3.1 General . 15 5.3.2 Thermal conductivity . 16 5.3.3 Reaction to fi

16、re 16 6 Designation code 18 7 Assessment and Verification of the Constancy of Performance (AVCP) . 18 7.1 General . 18 7.2 Product Type Determination (PTD) 18 7.3 Factory Production Control (FPC) 19 8 Marking and labelling . 19 Annex A (normative) Factory production control . 20 Annex B (normative)

17、Determination of the aged values of thermal conductivity . 22 BS EN 14307:2015EN 14307:2015 (E) 3 B.1 Scope . 22 B.2 Procedure for XPS foam without diffusion tight laminates . 22 B.3 Procedure for XPS foam for use with diffusion tight facings on both sides . 23 B.4 Blowing agent . 23 Annex C (inform

18、ative) Additional properties 24 C.1 General . 24 C.2 Behaviour under cyclic loading . 24 C.3 Compressive modulus of elasticity . 24 C.4 Bending strength 24 C.5 Shear strength 24 C.6 Deformation under specified compressive load and temperature conditions 25 C.7 Compressive creep . 25 C.8 Tensile stre

19、ngth perpendicular to facings 26 C.9 Long term water absorption by diffusion 26 C.10 Long term water absorption by immersion 26 C.11 Freezethaw resistance 27 C.12 Apparent density 27 C.13 Coefficient of thermal expansion 27 C.14 Closed cell content 27 Annex ZA (informative) Clauses of this European

20、Standard addressing the provisions of the EU Construction Products Regulation . 29 ZA.1 Scope and relevant characteristics 29 ZA.2 Procedures for AVCP of factory made extruded polystyrene foam products . 31 ZA.3 CE Marking and labelling . 38 Bibliography . 40 BS EN 14307:2015EN 14307:2015 (E) 4 Euro

21、pean foreword This document (EN 14307:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or

22、by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible fo

23、r identifying any or all such patent rights. This document supersedes EN 14307:2009+A1:2013. This document is identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have b

24、een made in this new edition of EN 14307 are the following: a) an addition to the foreword; b) an addition in 3.2.2; c) a new 4.3.8; d) modification of 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This document has been prepared unde

25、r a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsi

26、ble authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational c

27、onditions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains six annexes: Annex A (normative), Factory production control; Annex B (normative), Determination of the aged values of thermal conductivity; Annex C (informa

28、tive), Additional properties; BS EN 14307:2015EN 14307:2015 (E) 5 Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This standard includes a bibliography. This European Standard is one of a series of standards for insulati

29、on products used in building equipment and industrial installations, but this standard may be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting 21 months after

30、 availability as the date of withdrawal (dow) of national standards which conflict with the European standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come withi

31、n the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (

32、FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) p

33、roducts Specification EN 14307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethan

34、e foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made expanded polystyrene (EPS) products Specification EN 14313, Thermal insulation products for building equipment and industrial ins

35、tallations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equipment and industrial installa

36、tions Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cypru

37、s, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United

38、Kingdom. BS EN 14307:2015EN 14307:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approx

39、imately - 180 C to + 75 C. Below an operating temperature of - 50 C, special tests regarding the suitability of the material in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all cases. The products are manufactured in the form of faced o

40、r unfaced boards, pipe sections, segments and prefabricated ware. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulating systems

41、 and composite panels; the performance of systems incorporating these products is not covered. This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a

42、 given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,060 W/(mK) at a mean temperature of 10 C are not covered by this standard. This European Standard does not cover products intended to be used for the insulation of t

43、he building structure nor for acoustical insulation. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest ed

44、ition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications - Determination of length and width EN 823, Thermal insulating products for building applications - Determination of thickness EN 824, Thermal insulating products for bu

45、ilding applications - Determination of squareness EN 825, Thermal insulating products for building applications - Determination of flatness EN 826, Thermal insulating products for building applications - Determination of compression behaviour EN 1604, Thermal insulating products for building applica

46、tions - Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions EN 1609, Thermal insulating products for buildi

47、ng applications - Determination of short term water absorption by partial immersion EN 12086, Thermal insulating products for building applications - Determination of water vapour transmission properties BS EN 14307:2015EN 14307:2015 (E) 7 EN 12667, Thermal performance of building materials and prod

48、ucts - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow met

49、er methods - Thick products of high and medium thermal resistance EN 13164, Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification EN 13172:2012, Thermal insulation products - Evaluation of conformity EN 13467, Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation EN 13468, Thermal insulating products for building equipment and industrial insta