BS EN 14320-2-2013 Thermal insulating products for building equipment and industrial installations In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) po.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 14320-2:2013Thermal insulating products for building equipment and industrial installations In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR)

2、productsPart 2: Specification for the installed insulation productsBS EN 14320-2:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14320-2:2013. The UK participation in its preparation was entrusted to T e c h n i c a l Committee PRI/72, Rigid cellular materi

3、als.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI S

4、tandards Limited 2013.ISBN 978 0 580 53436 2 ICS 91.100.60 Compliance with a British Standard cannot confer immunityfrom legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationDate

5、 T e x t a f f e c t e dBS EN 14320-2:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14320-2 January 2013 ICS 91.100.60 English Version Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foa

6、m (PIR) products - Part 2: Specification for the installed insulation products Produits isolants thermiques destins aux quipements de btiment et aux installations industrielles - Produits en mousse rigide de polyurthanne (PUR) et de polyisocyanurate (PIR) projete, forms en place - Partie 2: Spcifica

7、tions relatives aux produits isolants aprs mise en uvre Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - An der Verwendungsstelle hergestellter Wrmedmmstoff aus Polyurethan (PUR)- und Polyisocyanurat (PIR)-Spritzschaum - Teil 2: Spezifikation fr di

8、e eingebauten Produkte This European Standard was approved by CEN on 24 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists

9、 and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under t

10、he responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugo

11、slav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN

12、 DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14320-2:2013: EBS EN 14320-2:2013EN 14320-2:2013 (E) 2 Contents Page Forewor

13、d . 3 1 Scope 4 2 Normative references . 4 3 Terms, definitions, abbreviations and symbols 4 3.1 Terms and definitions 4 3.2 Symbols and abbreviations . 6 4 Requirements . 6 4.1 General . 6 4.2 Suitability of the building equipment or industrial installation for the installation of the product . 6 5

14、 In-situ measurements and calculations 6 5.1 Declared installed insulation thickness 6 5.2 Declared installed aged thermal resistance, RD6 5.3 Declared installed insulation density 7 5.4 Foam quality checks carried out by the installer 7 6 Guidelines for installation 7 7 Installers declaration . 7 A

15、nnex A (normative) Method for the determination of the declared installed insulation thickness . 8 Annex B (normative) Methods for the determination of the declared installed insulation density . 9 B.1 Principle 9 B.2 Procedure . 9 B.2.1 General . 9 B.2.2 Destructive testing . 9 B.2.3 Non-destructiv

16、e testing . 9 B.3 Test report 9 Annex C (normative) Immersion method for the determination of the declared installed insulation density 10 C.1 Scope 10 C.2 Principles 10 C.3 Necessary equipment 10 C.4 Products and reagents . 10 C.5 Procedure . 10 C.6 Results 11 Annex D (normative) Installation guide

17、lines 12 D.1 General . 12 D.2 Substrate preparation 12 D.3 Substrate conditions 12 D.4 Atmospheric conditions 12 D.5 Spraying machine preparation 12 D.5.1 General . 12 D.5.2 Mixing ratio . 12 D.6 Spraying procedure . 13 Annex E (normative) Suitability of the building equipment or industrial installa

18、tion to receive the insulation product 14 E.1 Building equipment or industrial installation 14 E.2 Site survey 14 Bibliography 15 BS EN 14320-2:2013EN 14320-2:2013 (E) 3 Foreword This document (EN 14320-2:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and prod

19、ucts”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attenti

20、on is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This European Standard consists of two parts which form a package. The first part is the harm

21、onised part satisfying the mandate and the CPD and which is the basis for the CE marking covering the products, which are placed on the market. The second part, which is the non-harmonised part, covers the specification for the installed products. Both parts need to be used for the application of th

22、e insulation products in the end-use applications covered by EN 14320. Attention is drawn to the need to take into account any complementary member state rules (e.g. installation rules) which together with Part 2 of this European Standard ensures the fitness for purpose of the installed product. Thi

23、s European Standard is one of a series for expanded perlite, exfoliated vermiculite and polyurethane/polyisocyanurate in-situ formed insulation products used in building equipment and industrial installations, but this standard may be used in other areas where appropriate. The reduction in energy us

24、ed and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. EN 14320, Thermal insulating products for building equipment and industrial installations In-situ formed sprayed rigid polyuretha

25、ne (PUR) and polyisocyanurate foam (PIR) products consists of the following parts: Part 1: Specification for the rigid foam dispensed system before installation Part 2: Specification for the installed insulation products (the present document) According to the CEN/CENELEC Internal Regulations, the n

26、ational standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

27、Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14320-2:2013EN 14320-2:2013 (E) 4 1 Scope This European Standard specifies requirements for in-situ formed sprayed rigid polyurethane (PU

28、R) and polyisocyanurate (PIR) foam products for the insulation of building equipment industrial installations, for example storage vessels, pipes and ducts used for the supply of fuels, oil, other liquids, hot and cold water, air and other gases. Depending on the type of foam products complying with

29、 this standard, they may have service temperature ranges which lie within the limits of 200 C. This Part 2 of this European Standard is a specification for the installed insulation product. This Part 2 of this European Standard describes, when taken together with Part 1 of EN 14320, the product char

30、acteristics that are linked to the essential requirements of the EU Construction Products Directive. It also specifies the checks and tests to be used for the declarations made by the installer of the product. This European Standard does not specify the required levels of all properties to be achiev

31、ed by a product to demonstrate fitness for purpose in a particular end-use application. The required levels are to be found in regulations or non-conflicting standards. This European Standard does not cover factory made rigid polyurethane (PUR) or polyisocyanurate (PIR) foam products or in-situ prod

32、ucts intended to be used for the insulation of buildings. The products are not intended for use for direct airborne sound insulation or acoustic absorption applications. NOTE Foam products are either called flexible or rigid. The flexible products are used in upholstery and mattresses and are charac

33、terised by their ability to deflect, support and recover to their original thickness continually during their in-use phase. Those that are not flexible are termed rigid and do not possess these flexible characteristics. They are mostly used for thermal insulation purposes and vary widely in their co

34、mpression strength values. Once the cell structure is crushed in a rigid foam, it does not recover its thickness fully. Some of these rigid foams are very low in density with very low compression strengths and are sometimes described “commercially” as “soft foams” or “semi-rigid” foams. This note ha

35、s been included to clarify that all foams with such descriptions are covered by this standards used of the term rigid foam. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references

36、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1602, Thermal insulating products for building applications Determination of the apparent density EN 14320-1, Thermal insulating products for building equipm

37、ent and industrial installations In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Part 1: Specification for the rigid foam dispensed system before installation EN ISO 9229, Thermal insulation Vocabulary (ISO 9229:2007) 3 Terms, definitions, abbreviations and s

38、ymbols 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 9229:2007 and the following apply. BS EN 14320-2:2013EN 14320-2:2013 (E) 5 3.1.1 polyurethane foam PUR (in-situ formed products) rigid cellular plastics insulation material or product with a

39、 structure based on polymers mainly of the polyurethane type 3.1.2 polyisocyanurate foam PIR (in-situ formed products) rigid cellular plastics insulation material or product with a structure based on polymers mainly of the polyisocyanurate type 3.1.3 polyurethane foam PU rigid cellular plastics insu

40、lation materials or products including both polymer types based mainly on polyurethane (PUR) or mainly on polyisocyanurate (PIR) groups 3.1.4 rigid foam spray system kit of constituent components which when sprayed generates the rigid polyurethane (PUR) or the rigid polyisocyanurate foam (PIR) chara

41、cterised by the specified properties of the foam generated 3.1.5 isocyanate component liquid isocyanate product which is one of the components of the rigid foam spray system 3.1.6 polyol component liquid polyhydroxyl product containing an expanding agent, catalysts and other additives which is one o

42、f the components of the rigid foam spray system 3.1.7 machine equipment used to mix and spray the foam 3.1.8 industrial storage vessels storage vessels used as building equipment or located in industrial installations 3.1.9 mixing ratio proportions of the components of the rigid foam dispensing syst

43、em specified by the manufacturer to be dispensed to generate the rigid polyurethane or polyisocyanurate foam Note 1 to entry: This can be expressed either as a weight or a volume ratio or both. 3.1.10 installation process of spraying the mixture of the components onto the surface to be insulated Not

44、e 1 to entry: The procedure is carried out by the application of successive rigid foam layers until the specified foam thickness is obtained. 3.1.11 declared installed density representative overall density for the installed product (see 5.3) BS EN 14320-2:2013EN 14320-2:2013 (E) 6 3.1.12 declared i

45、nstalled insulation thickness insulation thickness as installed by the installer (see 5.1) 3.1.13 declared installed aged thermal resistance time average value of the thermal resistance of the installed insulation over 25 years (see 5.2) 3.2 Symbols and abbreviations Symbols used in this standard: d

46、 is the declared installed aged insulation thickness mm Dis the declared aged thermal conductivity W/(mK) RDis the declared installed aged thermal resistance m2K/W Abbreviations used in this standard: PUR is Rigid PolyUrethane Foam PU is Rigid PolyUrethane foam including PUR and PIR types PIR is Rig

47、id PolyIsocyanurate Foam 4 Requirements 4.1 General The installer shall use a PUR or PIR foam system that complies with EN 14320-1. NOTE The range of properties exhibited by PUR products is very wide. The same is true for PIR products and these two ranges often overlap. Although not in every case, g

48、enerally PIR products have a higher upper service temperature and can perform better in reaction to fire tests. In all cases, for both PIR and PUR products, their individual performance claimed by the manufacturer are described by the levels of properties obtained. Accordingly, therefore, all the de

49、claration clauses will be completed using the term PU to include both PUR and PIR products (see 3.1.3). 4.2 Suitability of the building equipment or industrial installation for the installation of the product The installer shall inspect the building equipment or industrial installation in accordance with manufacturers technical information and any national rules, in order to determine whether it is suitable for application of the product (see Annex E). 5 In-situ measurements and calculations 5.1 Declared installed insulation thicknes