1、BRITISH STANDARDBS EN 14337:2005Heating Systems in buildings Design and installation of direct electrical room heating systemsThe European Standard EN 14337:2005 has the status of a British StandardICS 91.140.10; 97.100.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g
2、44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Mon Apr 17 07:14:27 BST 2006, Uncontrolled Copy, (c) BSIBS EN 14337:2005This British Standard was published under the authority of the Standards Poli
3、cy and Strategy Committee on 16 January 2006 BSI 16 January 2006ISBN 0 580 46940 9National forewordThis British Standard is the official English language version of EN 14337:2005.The UK participation in its preparation was entrusted to Technical Committee RHE/24, Central heating installations, which
4、 has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section
5、entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compli
6、ance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related inte
7、rnational and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 16, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was
8、last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Mon Apr 17 07:14:27 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14337December 2005ICS 91.140.10; 97.100.10English VersionHeating Systems in buildings - Design a
9、nd installation of directelectrical room heating systemsSystmes de chauffage dans les btiments - Conception etinstallation des systmes de chauffage lectrique directHeizungssysteme in Gebuden - Planung und Einbau vonelektrischen Direkt-RaumheizungenThis European Standard was approved by CEN on 14 Feb
10、ruary 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obta
11、ined on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secret
12、ariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portuga
13、l, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldw
14、ide for CEN national Members.Ref. No. EN 14337:2005: ELicensed Copy: Wang Bin, na, Mon Apr 17 07:14:27 BST 2006, Uncontrolled Copy, (c) BSIEN 14337:2005 (E) 2 Contents Page Foreword_ 3 1. Scope _ 4 2. Normative references _ 5 3. Terms and definitions_ 5 4. System design requirements_ 7 Annex A (info
15、rmative) Control system classification _ 14 Annex B informative) Examples of wiring arrangements and control _ 16 Licensed Copy: Wang Bin, na, Mon Apr 17 07:14:27 BST 2006, Uncontrolled Copy, (c) BSIEN 14337:2005 (E) 3 Foreword This document (EN 14337:2005) has been prepared by Technical Committee C
16、EN/TC 228 ”Heating Systems in Buildings”, the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn a
17、t the latest by June 2006. The subjects covered by CEN/TC 228 are the following: - design of heating systems (water based, electrical etc.); - installation of heating systems; - commissioning of heating systems; - instructions for operation, maintenance and use of heating systems; - methods for calc
18、ulation of the design heat loss and heat loads; - methods for calculation of the energy performance of heating systems. Heating systems also include the effect of attached systems such as hot water production systems. All these standards are systems standards, i.e. they are based on requirements add
19、ressed to the system as a whole and not dealing with requirements to the products within the system. Where possible, reference is made to other European or International Standards, a.o. product standards. However, use of products complying with relevant product standards is no guarantee of complianc
20、e with the system requirements. The requirements are mainly expressed as functional requirements, i.e. requirements dealing with the function of the system and not specifying shape, material, dimensions or the like. The guidelines describe ways to meet the requirements, but other ways to fulfil the
21、functional requirements might be used if fulfilment can be proved. Heating systems differ among the member countries due to climate, traditions and national regulations. In some cases requirements are given as classes so national or individual needs may be accommodated. In cases where the standards
22、contradict with national regulations, the latter should be followed. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland,
23、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Mon Apr 17 07:14:27 BST 2006, Uncontrolled Copy, (c) BSIEN 14337:200
24、5 (E) 4 1. Scope This document specifies the design criteria for electrical heating systems in individual and collective residential buildings, the commercial and industrial building sector. This doucment covers fixed electrical heaters which emit heat directly into space by use of electricity only.
25、 The following systems are included: electric instantaneous heating systems: natural or fan convector heaters; radiant panels; radiators / resistance heaters; ceiling heating; infra-red and quartz linear heaters; thin slab floor heating; wall heating. electric non-instantaneous heating systems: full
26、 slab floor heating; room storage heaters; room storage fan heaters. This document does not cover radiant electric fires, movable heaters or electric heating systems that require a transfer medium outside of the appliance to deliver heat into the space. Examples of such systems include: air conditio
27、ning or cooling systems; unitary heat pumps; window, through the wall and split system; warm air distribution systems; central storage serving hot water radiator or warm air systems; hot water production, either storage or direct; any individual appliance serving more than one room. Requirements for
28、 installation, commissioning, and operation maintenance and use of direct electrical heating systems are excluded from this document. This document does not overwrite national regulations. This document does not override or add to requirements in appliance standards. Licensed Copy: Wang Bin, na, Mon
29、 Apr 17 07:14:27 BST 2006, Uncontrolled Copy, (c) BSIEN 14337:2005 (E) 5 2. Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenc
30、ed document (including any amendments) applies. EN 12098-3, Controls for heating systems - Part 3: Outside temperature compensated control equipment for electrical heating systems prEN 12098-4, Controls for heating systems - Part 4: Optimum start-stop control equipment for electrical systems prEN 12
31、098-5, Controls for heating systems - Part 5: Start-stop schedulers for heating systems EN 12170, Heating systems in buildings Procedure for the preparation of documents for operation, maintenance and use Heating systems requiring a trained operator EN 12171, Heating systems in buildings Procedure f
32、or the preparation of documents for operation, maintenance and use Heating systems not requiring a trained operator EN 12831, Heating systems in buildings - Method for calculation of the design heat load EN 14335, Heating systems in buildings - Method for calculation of system energy requirements an
33、d system efficiencies EN 60531, Household electric thermal storage room heaters - Methods of measuring the performance (IEC 60531:1999 modified) EN 60675, Household electric direct-acting room heaters - Methods for measuring performance (IEC 60675:1994) EN ISO 7730, Moderate thermal environments Det
34、ermination of the PMV and PPD indices and specification of the conditions for thermal comfort (ISO 7730:1994) prHD 60364-1, Electrical installations of buildings Part 1:Fundamental principles, assessment of general characteristics, definitions 3. Terms and definitions For the purposes of this doucme
35、nt, the following terms and definitions apply : 3.1 central control method of controlling the heat flow to a heat emission system by varying the power input 3.2 design heat load required heat flow necessary to achieve the specified design conditions 3.3 design heat loss quantity of heat per unit tim
36、e leaving the building to the external environment under specified design conditions 3.4 external design temperature external air temperature which is used for the calculation of the design heat loss Licensed Copy: Wang Bin, na, Mon Apr 17 07:14:27 BST 2006, Uncontrolled Copy, (c) BSIEN 14337:2005 (
37、E) 6 3.5 external air temperature air temperature outside the building 3.6 heat gain quantity of heat generated within or entering into the heated space from heat sources other than the heating system 3.7 heating period time when heating is needed to maintain the internal design temperature 3.8 inte
38、rnal design temperature operative temperature at the center of the zone, used for the calculation of the design heat loss 3.9 local control method of controlling the heat flow to a heat emission system locally on the basis of the temperature of the heated space 3.10 operating temperature(s) temperat
39、ure(s) at which the system (or parts of the system) is designed to be operated 3.11 operative temperature arithmetic average of the air temperature and the mean radiant temperature 3.12 temperature control method of controlling the system temperature in a zone or heated space by automatic means (set
40、ting of temporary override of the control is possible) 3.13 timing control operation which switches heating modes to affect the heating control system according to a program 3.14 optimization of timing control optimum start-up and shut-down times in order to reduce energy consumption and to take int
41、o account where necessary variations in tarifs without reducing thermal comfort defined by the user. 3.15 zone space or groups of spaces with similar thermal characteristics 3.16 zone control local control of a zone consisting of more than one space Licensed Copy: Wang Bin, na, Mon Apr 17 07:14:27 B
42、ST 2006, Uncontrolled Copy, (c) BSIEN 14337:2005 (E) 7 3.17 charging control of room storage heaters method of controlling the heat content of a storage heating system within an allowed charging period as a function of internal and external conditions and varying tarifs where applicable 3.18 reheat
43、period time necessary to bring heating level to the design temperature 3.19 data transmission bus communication connection transmitting data between components 3.20 remote appliance controller control located and away from the appliance 3.21 integral appliance controller control located within the a
44、ppliance or the casing 3.22 electric instantaneous heating systems heating systems using heat emitters from which heat is directly emitted into the space where they are located 3.23 electric non-instantaneous heating systems systems which store heat obtained from electric energy by charging an accum
45、ulating core before a heat demand in a room occurs, the heat being discharged at any time (e.g. storage heating) 3.24 mode State of a device or system defining the manner by which it performs ist functions. A heating system or a heating controller should have many heating modes (or heating operation
46、 modes), e.g.: nominal, reduced, on, off, start, standby. Noting than other modes can also exist 4. System design requirements 4.1 Requirements for preliminary design information The electrical heating system shall be designed to be installed and operated in a way that will not cause any damage to t
47、he building or other installations and with due consideration for costs and energy use. The electrical heating system shall be designed with due consideration for installation, commissioning, operation, maintenance and repair of components, appliances and the system. Licensed Copy: Wang Bin, na, Mon
48、 Apr 17 07:14:27 BST 2006, Uncontrolled Copy, (c) BSIEN 14337:2005 (E) 8 The design shall always be carried out in accordance with the specification agreed between the contracting parties. At the planning stage or during progress of design work the following items shall be agreed upon and documented: a) clarification of the responsibilities of the designer and the installer and whether or not a trained operator is needed; b) the need for complian
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1