1、BRITISH STANDARD BS EN 14344:2004 Child use and care articles Child seats for cycles Safety requirements and test methods The European Standard EN 14344:2004 has the status of a British Standard ICS 97.190 BS EN 14344:2004 This British Standard was published under the authority of the Standards Poli
2、cy and Strategy Committee on 29 November 2004 BSI 29 November 2004 ISBN 0 580 44918 1 National foreword This British Standard is the official English language version of EN 14344:2004. The UK participation in its preparation was entrusted to Technical Committee CW/41, Child use and care articles, wh
3、ich has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the sec
4、tion entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.
5、Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor re
6、lated international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 40, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the
7、document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN14344 August2004 ICS97.190 Englishversion ChilduseandcarearticlesChildseatsforcyclesSafety requirementsandtestmethods ArticledepuricultureSigesenfantspourbicyclettes E
8、xigencesdescuritetmthodesdessai ArtikelfrSuglingeundKleinkinderKindersitzefr FahrrderSicherheitstechnischeAnforderungenund Prfverfahren ThisEuropeanStandardwasapprovedbyCENon2February2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope a
9、n Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagem
10、adebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,
11、Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitatio
12、ninanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN14344:2004:EEN 14344:2004 (E) 2 Contents page Foreword4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Classification7 5 General requirements and test conditions .8 5.1 Principle of the most onerous condition.8
13、 5.2 Tolerances and test conditions8 5.3 Order of tests .8 6 Construction.9 6.1 Dimensions.9 6.2 Edges, corners and projections.12 6.3 Entrapment .13 6.4 Small parts13 6.5 Decals .15 7 Strength and durability .16 7.1 Requirements for strength and durability.16 7.2 Mounting method for strength and du
14、rability.16 7.3 Test equipment for strength and durability 17 7.4 Test methodology for strength and durability18 8 Attachment of the seat to the cycle .20 8.1 General requirements for all seats.20 8.2 Additional requirements and test method for rear seats attached to luggage carriers.21 8.3 Addition
15、al requirements for front seats 21 9 Restraint system21 9.1 General21 9.2 Effectiveness of restraint system, roll-over test 21 9.3 Attachment of restraint system to the seat.23 9.4 Strength of fasteners.23 9.5 Micro-slip and strength of adjusting devices .23 9.6 Closure of restraint system 24 9.7 Ch
16、ild-proof retention .24 10 Foot guarding and retention.25 10.1 Methodology of foot guarding25 10.2 Foot retention.27 11 Requirements for materials 27 11.1 Chemical hazards 27 11.2 Corrosion27 11.3 Decay and insect attack 27 12 Marking .27 12.1 General requirements for marking.27 12.2 Marking require
17、ments for rear seats .28 12.3 Marking requirements for rear seats attached to luggage carriers28 12.4 Marking, test method.28 13 Purchase information28 EN 14344:2004 (E) 3 13.1 General requirements for purchase information .28 13.2 Specific purchase information.29 14 Instructions for use .29 14.1 Ge
18、neral .29 14.2 Specific instructions for installation and use.29 Annex A (normative) Seat measuring instrument32 Annex B (normative) Test bags35 Annex C (informative) Rationale36 EN 14344:2004 (E) 4 Foreword This document (EN 14344:2004) has been prepared by Technical Committee CEN/TC 252 “Child use
19、 and care articles”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest b
20、y February 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the fol
21、lowing countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Swed
22、en, Switzerland and the United Kingdom. EN 14344:2004 (E) 5 1 Scope This document specifies requirements for child seats for cycles, which are intended to be mounted on pedal cycles and electrically power assisted bicycles, in order to transport children with a weight from 9 kg up to 22 kg (approxim
23、ately 9 months up to 5 years) and who are capable of sitting unaided. NOTE Some European countries have special legislation for child seats for cycles. Compliance with this document may not meet this legislation. 2 Normative references The following referenced documents are indispensable for the app
24、lication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-1:1998, Safety of toys Part 1: Mechanical and physical properties. EN 71-3, Safety of toys Part 3: Migratio
25、n of certain elements. EN 1811, Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin. EN ISO 1043-1, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1:2001). EN ISO 1043-2,
26、 Plastics Symbols and abbreviated terms Part 2: Fillers and reinforcing materials (ISO 1043-2:2000). ISO 4628-3, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degre
27、e of rusting. ISO 9227, Corrosion tests in artificial atmospheres Salt spray tests. ISO 11243, Cycles Luggage carriers for bicycles Concepts, classification and testing. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 seat child seat intended
28、 to be mounted on a cycle 3.2 front seat child seat intended to be mounted on a cycle in front of the rider (between handlebar and rider) 3.3 rear seat child seat intended to be mounted on a cycle behind the rider 3.4 reclining seat front or rear seat that can transport a child either in an upright
29、or in a reclined sitting position EN 14344:2004 (E) 6 3.5 integral guard guard that is part of, or pre-assembled with, another essential and major part of the seat (for example a footrest) and cannot be removed or can be removed by the use of tools only 3.6 additional guard guards that are always pr
30、ovided with the seat, but do not satisfy the definition of an integral guard 3.7 central plane vertical plane on which lies the centre line of the cycle, seat and the measuring instrument 3.8 reference plane horizontal plane defined on the seat measuring instrument, above the lowest points of the ma
31、in sitting area of the seat 3.9 attachment system structure to attach the child seat to the cycle 3.10 footrest structure to support the childs foot 3.11 accessibility zone zones that are likely to be reached by the hands or toes of the child in the seat 3.12 handlebar and handlebar stem assembly (s
32、ee Figure 1) 1 handlebar that is held by rider 2 extension part of the handlebar stem that positions the handlebar in front of the steering axis 3 quill part of some designs of the handlebar stem, that is co-axial with the steering axis and that fits partly into the fork steering tube EN 14344:2004
33、(E) 7 Key 1 handlebar 2 extension 3 quill Figure 1 Handlebar and handlebar stem assembly 3.13 restraint system device designed to keep the child sitting in a safe position in the seat 3.14 crotch restraint device designed to pass between the childs legs to prevent the child from sliding forward 4 Cl
34、assification Seats are classified according to the weight of the child carried and their mounting position on the cycle (see Table 1). EN 14344:2004 (E) 8 Table 1 Classification of seats Weight/capacity range kg Type of seat 9 15 9 22 Rear seat A15 A22 Front seat between handlebar and rider C15 Not
35、permitted Front seat in front of handlebar Not permitted Not permitted EXAMPLE Designation of a seat to be mounted behind the rider (A), maximum load 15 kg (15) : Child seat A15. 5 General requirements and test conditions 5.1 Principle of the most onerous condition Where a test calls for a seat to b
36、e mounted on a cycle, the tester shall refer to the purchase information (see 13) and instructions for use (see 14). It is allowed to use any cycle that is suitable according to this information. Each test shall be conducted with the seat in the most onerous condition for that test. 5.2 Tolerances a
37、nd test conditions Unless otherwise stated the following tolerances shall be used : All forces shall have an accuracy of 5%. All masses shall have an accuracy of 1 %. All dimensions shall have an accuracy of 1,0 mm. All time measurements shall have an accuracy of 1s. All angles shall have an accurac
38、y of 1. All frequencies, amplitudes shall have an accuracy of 5 %. The seat shall be conditioned at a temperature of (23 5) C for at least 2 h prior to test. All tests shall be carried out at a temperature of (23 5) C unless otherwise specified. 5.3 Order of tests The test shall be carried out in th
39、e order that they appear in this document. All tests shall be performed on one seat. EN 14344:2004 (E) 9 6 Construction 6.1 Dimensions 6.1.1 Seating area and footrests 6.1.1.1 Requirements for seating area and footrests The dimensions of the main child supporting areas of the seat shall comply with
40、items a, b, c, d, e and f in Table 2, when measured in accordance with 6.1.1.3. NOTE 1 The reference plane of this measuring instrument lies approximately 55 mm above the sitting area, and measurements are made at or relative to this plane. Dimensions c and d in Table 2 are therefore some 55 mm less
41、 than the full dimensions of these features, whereas the dimensions in f are greater by a similar amount. NOTE 2 The items h, i and j are not requirements but necessary points for the measuring instrument. NOTE 3 For item f : the length of the lower leg is adjustable. EN 14344:2004 (E) 10 Table 2 Di
42、mensions Dimensions in millimetres Class of seat Items A15 C15 A22 a Seat width (inside) 230 30 230 30 250 40 b Seat length (front to back) 190 30 190 30 200 30 c Minimum height of backrest 385 160 400 d Minimum height of seat side 65 45 85 e Minimum footrest overall width length 75 100 75 100 75 11
43、5 f Minimum range of footrest adjustment (height) 180 250 180 220 180 290 g Minimum length of seat side 105 105 105 h Corresponding knee point settings 154 244 154 244 154 294 i Maximum lower leg length 270 270 340 j Half maximum foot length 80 80 100 6.1.1.2 Mounting method for measuring instrument
44、 The dimensions of the seat shall be checked using the measuring instrument described in Annex A. Mount the seat on a cycle or similar fixture, with any padding supplied with the seat fitted in accordance with the manufacturers instructions. Place the measuring instrument in the seat with the point
45、A touching the centre of the lower backrest area. Load the measuring instrument with a mass of 5 kg centred above point C and adjust the orientation of the seat until the reference plane of the instrument becomes horizontal. NOTE When measuring the padded areas it is permitted that the measuring ins
46、trument is loaded to compress any padding in a similar way to a child sitting in the seat. EN 14344:2004 (E) 11 6.1.1.3 Test method for seating area and footrest Take measurements relative to the points on the reference plane of the measuring instrument as follows (see Figure A.2) : a) measure the i
47、nside width of the seat, through point B ; check that this complies with the requirements given in Table 2, line a ; b) slide the 60 mm by 15 mm diameter pillar along the thigh scale until it touches the edge of the seat. The seat length is the distance between the edge of this pillar and point A ;
48、check that this complies with the requirements given in Table 2, line b ; c) measure to the top centre of the backrest from point A. Take the linear distance between these two points using a calliper, or, if using the measuring instrument as shown, calculate from the vertical and horizontal displacement relative to point A ; check that this distance complies with the requirements given in Table 2, line c. If the child seat is fitted with an adjustable headrest measure to the t
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1