BS EN 14449-2005 Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity Product standard《建筑物用玻璃 夹层玻璃和夹层安全玻璃 一致性评估 生产标准》.pdf

1、BRITISH STANDARDBS EN 14449:2005Glass in building Laminated glass and laminated safety glass Evaluation of conformity/ProductstandardThe European Standard EN 14449:2005 has the status of a British StandardICS 81.040.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g5

2、4g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Tue May 09 03:14:17 BST 2006, Uncontrolled Copy, (c) BSIBS EN 14449:2005This British Standard was published under the authority of the Standards Policy a

3、nd Strategy Committee on 10 February 2006 BSI 10 February 2006ISBN 0 580 46084 3National forewordThis British Standard is the official English language version of EN 14449:2005.The UK participation in its preparation was entrusted by Technical Committee B/520, Glass and glazing in building, to Subco

4、mmittee B/520/1, Glass and glazing in building Basic and transformed glass products, which has the responsibility to:A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European pu

5、blications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the n

6、ecessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the in

7、terpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 52, an inside back cover and a

8、back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Tue May 09 03:14:17 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1

9、4449May 2005ICS 81.040.20English versionGlass in building - Laminated glass and laminated safety glass -Evaluation of conformity/Product standardVerre dans la construction - Verre feuillet et verre feuilletde scurit - Evaluation de la conformit/Norme de produitGlas im Bauwesen - Verbundglas und Verb

10、und-Sicherheitsglas - Konformittsbewertung/ProduktnormThis European Standard was approved by CEN on 3 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alt

11、eration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by transl

12、ationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungar

13、y, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassa

14、rt, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14449:2005: ELicensed Copy: Wang Bin, na, Tue May 09 03:14:17 BST 2006, Uncontrolled Copy, (c) BSIEN 14449:2005 (E) 2Contents Page Foreword. 31 Scope 42 Norm

15、ative references . 43 Terms and definitions. 54 Requirements 64.1 Product description 64.2 Conformity with the definition of laminated glass and laminated safety glass . 64.3 Determination of the characteristics performances. 74.4 Durability 104.5 Dangerous substances. 105 Evaluation of conformity 1

16、15.1 General. 115.2 Initial type testing of the product (see 5.1, b) 115.3 Factory production control (FPC) and inspection of samples in accordance with a prescribed test plan (see 5.1, a1 and 2) 135.4 Initial inspection of factory and of factory production control (see 5.1, a3). 135.5 Continuous su

17、rveillance and assessment of the factory production control (see 5.1, a3) 146 Marking and/or labelling. 156.1 General. 156.2 Product marking 156.3 Product characteristics 156.4 “Characteristics/performance identification paper” . 15Annex A (normative) Factory production control 16Annex B (informativ

18、e) Tests for ensuring conformity 28Annex C (informative) Laminated safety glass: Mechanical resistance tests 33Annex D (informative) Criteria for deciding if a change within an assembly requires a new initial type test. 36Annex E (informative) Provisions for voluntary involvement of third party(ies)

19、 . 38Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products Directive. 39Bibliography . 52Licensed Copy: Wang Bin, na, Tue May 09 03:14:17 BST 2006, Uncontrolled Copy, (c) BSIEN 14449:2005 (E)3Foreword This European Standard (EN 14449:2005) has

20、 been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by IBN/BIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2005, and conflicting nat

21、ional standards shall be withdrawn at the latest by January 2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see inform

22、ative Annex ZA, which is an integral part of this document. No existing European Standard is superseded. This European Standard stands alone. This European Standard contains other aspects of importance of trade. This European Standard includes a Bibliography. According to the CEN/CENELEC Internal Re

23、gulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

24、 Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Tue May 09 03:14:17 BST 2006, Uncontrolled Copy, (c) BSIEN 14449:2005 (E)41 Scope This European Standard covers the evaluation of conformity and the factory production control o

25、f laminated glass and laminated safety glass for use in buildings. NOTE 1 This also includes requirements subject to regulation. NOTE 2 For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.2 Normative re

26、ferences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356, Glass in building - Security gla

27、zing - Testing and classification of resistance against manual attack EN 410, Glass in building - Determination of luminous and solar characteristics of glazing EN 572-1, Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties

28、EN 673, Glass in building Determination of thermal transmittance (U value) Calculation methodEN 1063, Glass in building - Security glazing - Testing and classification of resistance against bullet attack EN 1748-1-1, Glass in building - Special basic products - Borosilicate glasses - Part 1-1: Defin

29、ition and general physical and mechanical properties EN 1748-2-1, Glass in building - Special basic products - Glass ceramics - Part 2-1: Definition and general physical and mechanical properties EN 1863-1, Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and descr

30、iption EN 12150-1, Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description EN 12337-1, Glass in building - Chemically strengthened soda lime silicate glass Part 1: Definition and description EN 12600, Glass in building - Pendulum test - Impact tes

31、t method and classification for flat glass EN 12758, Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties EN 12898, Glass in building - Determination of the emissivityEN 13024-1, Glass in building - Thermally toughened borosilicate safety g

32、lass - Part 1: Definition and description EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using test data from reaction to fire testsLicensed Copy: Wang Bin, na, Tue May 09 03:14:17 BST 2006, Uncontrolled Copy, (c) BSIEN 14449:2005 (E)5EN 13501

33、-2, Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation servicesprEN 13501-5, Fire classification of construction products and building elements - Part 5: Classification using test data from external

34、 fire exposure to roof testsEN 13541, Glass in building - Security glazing - Testing and classification of resistance against explosion pressureEN 14178-1, Glass in building Basic alkaline earth silicate glass products - Part 1: Float glassprEN 14179-1, Glass in building - Heat soaked thermally toug

35、hened soda lime silicate safety glass Part 1: Definition and descriptionprEN 14321-1, Glass in building Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description EN ISO 12543-1:1998, Glass in building Laminated glass and laminated safety glass - Part 1: Definition

36、s and description of component parts (ISO 12543-1:1998) EN ISO 12543-2:1998, Glass in building Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:1998) EN ISO 12543-3:1998, Glass in building Laminated glass and laminated safety glass - Part 3: Laminated glass (I

37、SO 12543-3:1998) EN ISO 12543-4:1998, Glass in building Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:1998) EN ISO 12543-5:1998, Glass in building Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:1998) EN

38、ISO 12543-6:1998, Glass in building Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:1998)3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN ISO 12543:1998 Parts 1, 2, 3, 4, 5 and 6 and the following apply. 3.1 initia

39、l type testing determination of the performance of a product (characteristic, durability), on the basis of either actual tests or other procedures (such as conventional, standardised, tabulated or general accepted values, standardised or recognised calculation methods, test reports when made availab

40、le, ), in accordance with this European Standard that demonstrates compliance with this European Standard 3.2 test report document that covers the results of tests undertaken on a representative sample of the product from production or on a prototype design of the product 3.3 product description doc

41、ument that details the relevant parameters, e.g. process conditions, structure, etc., for defining a product that complies with the standard. It includes specific reference(s) to characteristics that are modified by the production process 3.4 significant change variation in performance beyond the pe

42、rmitted tolerance for the characteristic Licensed Copy: Wang Bin, na, Tue May 09 03:14:17 BST 2006, Uncontrolled Copy, (c) BSIEN 14449:2005 (E)64 Requirements 4.1 Product description For conformity purposes, the laminated/laminated safety glass manufacturer1is responsible for the preparation and mai

43、ntenance of a product description. This description shall describe the product and/or product families. Disclosure of the product description shall be at the discretion of the laminated/laminated safety glass manufacturer or his agent except in the case of regulatory requirements. The description sh

44、all contain at least a normative part. The description may also contain an informative part, when the manufacturer foresees further development of the product. The normative part of the description shall contain the following minimum information: A reference to EN ISO 12543 Parts 1 to 6 and all othe

45、r standards with which the manufacturer claims compliance; Component parts: Glass types and thicknesses (see 4.3.1.2), Plastics glazing sheet materials types and thicknesses, Interlayer types and thicknesses; The order of stacking of the components; Lamination process, e.g. folio, cast-in-place, etc

46、.; Coatings if present and their position relative to an interlayer.The interlayers may be listed either in full, i.e. chemical composition, or by a manufacturers code. The definition of product families shall be consistent with the normative part of the product description.The substitution of mater

47、ials and/or components shall maintain the conformity with the product description. The substituting materials and/or components can be added to the product family and also the product description when compliance has been demonstrated. 4.2 Conformity with the definition of laminated glass and laminat

48、ed safety glass 4.2.1 General Products shall conform with the manufacturers product description and fulfil the definition and requirements of laminated glass or laminated safety glass (see 4.2.2 and 4.2.3). 4.2.2 Conformity with definition of laminated glass Products shall fulfil the definition and

49、requirements for laminated glass as defined in EN ISO 12543-3. 1The terms manufacturer and producer are understood as being synonyms (see CPD working document NB-CPD/02/019 issued 24 April 2002 page 1) Licensed Copy: Wang Bin, na, Tue May 09 03:14:17 BST 2006, Uncontrolled Copy, (c) BSIEN 14449:2005 (E)74.2.3 Conformity with definition of laminated safety glass Products shall fulfil the definition and requirements for laminated safety glass as defined in EN ISO 12543-2. 4.3 Determination of the characteristics perfor