BS EN 14462-2015 Surface treatment equipment Noise test code for surface treatment equipment including its ancillary handling equipment Accuracy grades 2 and 3《表面处理设备 包括其辅助操作装置在内的表.pdf

1、BSI Standards PublicationBS EN 14462:2015Surface treatment equipment Noise test code forsurface treatment equipmentincluding its ancillary handlingequipment Accuracy grades2 and 3BS EN 14462:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14462:2015. It sup

2、ersedes BS EN 14462:2005+A1:2009 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee MCE/3/8, Thermoprocessing equipment - Safety.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not pu

3、rport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 80853 1 ICS 17.140.20; 25.220.01 Compliance with a British Standard cannot confer immunity from

4、 legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14462 February 2015 ICS 17.140.

5、20; 25.220.01 Supersedes EN 14462:2005+A1:2009English Version Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment -Accuracy grades 2 and 3 Equipements de traitement de surface - Code dessai acoustique pour quipements de traitement

6、de surface, y compris les quipements de manutention auxilliaires - Classes de prcision 2 et 3 Oberflchenbhandlungserte -Geruschmesverfahren fr Oberflchenbehandlungsgerte - einschlielich ihrer Be-und Entladeeinrichtungen - Genauigkeitsklassen 2 und 3 This European Standard was approved by CEN on 29 N

7、ovember 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be

8、 obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to t

9、he CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ir

10、eland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management C

11、entre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14462:2015 EBS EN 14462:2015EN 14462:2015 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and d

12、efinitions .7 4 Determination of A-weighted emission sound pressure level at workstations and other specified positions 9 5 Determination of A-weighted sound power level 10 6 Measurement uncertainties . 10 7 Mounting conditions. 11 8 Operating conditions 11 9 Information to be recorded 12 10 Informa

13、tion to be reported . 12 11 Declaration and verification of noise emission values . 13 Annex A (normative) Operating conditions and measurement positions for the determination of noise emission of surface treatment machinery . 15 Annex B (normative) Work stations for manually operated open-fronted s

14、pray booths and enclosed spray booths . 19 Annex C (informative) Example for the determination of the A-weighted emission sound pressure level values for a machine without a defined work station 21 Annex D (informative) Noise emission determination procedure . 27 Annex ZA (informative) Relationship

15、between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 29 Bibliography . 30 BS EN 14462:2015EN 14462:2015 (E) 3 Foreword This document (EN 14462:2015) has been prepared by Technical Committee CEN/TC 271 “Surface treatment equipment - Safety”, the secretariat of wh

16、ich is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015 and conflicting national standards shall be withdrawn at the latest by August 2015. Attention is drawn to the possib

17、ility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14462:2005+A1:2009. This document has been prepared under a mandate given to CEN by the Eu

18、ropean Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive 2006/42/EC, see informative Annex ZA, which is an integral part of this document. This document includes the following significant technical changes w

19、ith respect to EN 14462:2005+A1:2009: integration of dry ice blasting equipment in A.1.2; integration of automatic electrostatic application equipment for flammable flock material (EN 50223) in A.3.1. It augments the “C”-type safety standards prepared by CEN/TC 271. Its purpose is to provide a means

20、 of determination, declaration and verification of noise emission for the equipment within the scope of this document. The determination of noise emission values is a prerequisite for a manufacturer to assess the noise reduction obtained at the design stage. According to the CEN-CENELEC Internal Reg

21、ulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,

22、Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14462:2015EN 14462:2015 (E) 4 Introduction This noise test code gives assistance to carry out noise emission measurements

23、and to determine values for noise declaration purposes under the Machinery Directive 2006/42/EC and provides the means for their verification. Annex D with Figure D.1 and Figure D.2 provides an overview on the noise determination procedure. Noise emission characteristics include both emission sound

24、pressure levels at workstations and sound power levels. The determination of these characteristics is necessary for manufacturers to declare the noise emitted, comparing the noise emitted by machines, purposes of noise control at the source during the design stage, estimation of noise exposure at th

25、e workstation(s). Noise testing of the machinery can be done at the manufacturers site, at the place of mounting or at any other adequate location. BS EN 14462:2015EN 14462:2015 (E) 5 1 Scope This European Standard specifies standardized conditions for the determination, declaration and verification

26、 of airborne noise emission of the following surface treatment equipment: machinery for cleaning and pre-treatment of industrial item surfaces (see EN 12921-1, EN 12921-2, EN 12921-3, EN 12921-4); phosphating machinery; plating machinery; plasma surface treatment machinery; machinery for the supply

27、and/or circulation of coating materials under pressure (see EN 12621, EN 12757-1); atomizing and spraying equipment for coating materials (see EN 1953, EN 50050-1, EN 50050-2, EN 50050-3, EN 50059, EN 50176, EN 50177, EN 50348); coating plants (see EN 12215, EN 12581, EN 12981, EN 13355, EN 50223);

28、dryers, ovens and evaporating equipment (see EN 1539); thermal cleaning plants (incinerators) for exhaust gas from surface treatment plants (see EN 12753); dry-ice blasting equipment. For the above surface treatment machinery, this European Standard gives provisions for the determination of emission

29、 sound pressure levels at workstations and/or other specified positions and sound power levels. This European Standard specifies noise emission measurement methods, mounting and operating conditions that shall be used for the test. The use of this document ensures the reproducibility of the determin

30、ation of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise emission measurement method used (see Clause 4 and Clause 5). Noise emission measurement methods allowed by this document are engineering methods (grade 2) and survey methods (g

31、rade 3). This European Standard does not apply to machines not explicitly listed in the scope: printing, paper converting and paper making machinery and auxiliary equipment (see EN 13023); abrasive blasting machinery see EN 1265. 2 Normative references The following documents, in whole or in part, a

32、re normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1539, Dryers and ovens, in which flammable substanc

33、es are released Safety requirements BS EN 14462:2015EN 14462:2015 (E) 6 EN 1953, Atomising and spraying equipment for coating materials Safety requirements EN 12215, Coating plants Spray booths for application of organic liquid coating materials Safety requirements EN 12581, Coating plants Machinery

34、 for dip coating and electrodeposition of organic liquid coating materials Safety requirements EN 12621, Machinery for the supply and circulation of coating materials under pressure Safety requirements EN 12753, Thermal cleaning systems for exhaust gas from surface treatment equipment Safety require

35、ments EN 12757-1, Mixing machinery for coating materials Safety requirements Part 1: Mixing machinery for use in vehicle refinishing EN 12921-1, Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours Part 1: Common safety requirements EN 12921-2, Machines for su

36、rface cleaning and pre-treatment of industrial items using liquids or vapours Part 2: Safety of machines using water based cleaning liquids EN 12921-3, Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours Part 3: Safety of machines using flammable cleaning liq

37、uids EN 12921-4, Machines for surface cleaning and pretreatment of industrial items using liquids and vapours Part 4: Safety of machines using halogenated solvents EN 12981, Coating plants Spray booths for application of organic powder coating material Safety requirements EN 13355, Coating plants Co

38、mbined booths Safety requirements EN 50223, Stationary electrostatic application equipment for ignitable flock material Safety requirements EN ISO 3744:2010, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essenti

39、ally free field over a reflecting plane (ISO 3744:2010) EN ISO 3746, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746) EN ISO 3747, Acoustics Determinati

40、on of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment (ISO 3747) EN ISO 4871:2009, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN IS

41、O 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning (ISO 9614-2) EN ISO 11201:2010, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified p

42、ositions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) BS EN 14462:2015EN 14462:2015 (E) 7 EN ISO 11202, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other

43、 specified positions applying approximate environmental corrections (ISO 11202) EN ISO 11204, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204)

44、3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 emission sound pressure p sound pressure, at a specified position near a noise source, when the source is in operation under specified operating and mounting conditions on a reflecting plane sur

45、face excluding the effects of background noise as well as the effects of reflections other than those from the plane or planes permitted for the purpose of the test Note 1 to entry: Emission sound pressure is expressed in pascals. SOURCE: EN ISO 11201:2010, 3.2, modified 3.2 emission sound pressure

46、level Lpten times the logarithm to the base 10 of the ratio of the square of the emission sound pressure, p2(t), to the square of the reference sound pressure, p02(the reference sound pressure is 20 Pa), measured with a particular time weighting and a particular frequency weighting, selected from th

47、ose defined in EN 61672-1 Note 1 to entry: Emission sound pressure level is expressed in decibels. Note 2 to entry: The emission sound pressure level of surface treatment equipment is determined at specified positions in accordance with this document. SOURCE: EN ISO 11201:2010, 3.3, modified 3.3 ave

48、rage emission sound pressure level Lpenergy-average of the emission sound pressure levels Lpat several microphone positions around the machine 3.4 sound power W rate per unit time at which airborne sound energy is radiated by a source Note 1 to entry: Sound power is expressed in watts. SOURCE: EN IS

49、O 3744:2010, 3.20, modified 3.5 sound power level LWten times the logarithm to the base 10 of the ratio of the sound power radiated by the source under test to the reference sound power, which is 1 pW (1012W) BS EN 14462:2015EN 14462:2015 (E) 8 Note 1 to entry: Sound power level is expressed in decibels. Note 2 to entry: The frequency weighting or the width of the frequency band used is indicated, for example, A-weighted sound power level (LWA). SOURCE: