BS EN 14477-2004 Packaging - Flexible packaging material - Determination of puncture resistance - Test methods《包装 柔性包装材料 抗击穿性的测定 试验方法》.pdf

1、BRITISH STANDARDBS EN 14477:2004Packaging Flexible packaging material Determination of puncture resistance Test methodsThe European Standard EN 14477:2004 has the status of a British StandardICS 55.040g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g4

2、0g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Tue May 16 02:33:53 BST 2006, Uncontrolled Copy, (c) BSIBS EN 14477:2004This British Standard was published under the authority of the Standards Policy and Strategy Commi

3、ttee on 31 March 2006 BSI 2006ISBN 0 580 48065 8National forewordThis British Standard is the official English language version of EN 14477:2004.The UK participation in its preparation was entrusted to Technical Committee PKW/0, Packaging, which has the responsibility to: A list of organizations rep

4、resented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”

5、, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer

6、immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them

7、 in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed

8、Copy: Wang Bin, na, Tue May 16 02:33:53 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14477April 2004ICS 55.040English versionPackaging - Flexible packaging material - Determination ofpuncture resistance - Test methodsEmballage - Matriaux demballage souples -D

9、termination de la rsistance la perforation - MthodesdessaiVerpackung, Flexible Packstoffe - Bestimmung derDurchstofestigkeit - PrfverfahrenThis European Standard was approved by CEN on 16 January 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condi

10、tions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three off

11、icial versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Be

12、lgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMI

13、T EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14477:2004: ELicensed Copy: Wang Bin, na, Tue May 16 02:33:53 BST 200

14、6, Uncontrolled Copy, (c) BSIEN 14477:2004 (E)2Contents PageForeword. 31 Scope . 42 Principle. 43 Apparatus 44 Calibration . 75 Test specimens. 76 Probe speed 77 Expression and calculation of results 78 Precision data . 89 Test report . 8Bibliography . 9Licensed Copy: Wang Bin, na, Tue May 16 02:33:

15、53 BST 2006, Uncontrolled Copy, (c) BSIEN 14477:2004 (E)3ForewordThis document (EN 14477:2004) has been prepared by Technical Committee CEN/TC 261 “Packaging”, thesecretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of a

16、n identicaltext or by endorsement, at the latest by October 2004 and conflicting national standards shall be withdrawn atthe latest by October 2004.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European S

17、tandard: Austria, Belgium, Cyprus, Czech Republic,Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerlandand United Kingdom.Licensed Copy: Wang Bin

18、, na, Tue May 16 02:33:53 BST 2006, Uncontrolled Copy, (c) BSIEN 14477:2004 (E)41 ScopeThis standard describes a test method of determining the puncture resistance of a flexible packaging material.The method is applicable to multilayer flexible packaging materials.2 PrincipleA specimen of the flexib

19、le packaging material is fastened in a sample holder. A probe penetrates thespecimen with a constant speed. The force and the elongation needed to penetrate the specimen arerecorded.3 Apparatus3.1 Universal testing apparatus, with means of measuring elongation.3.2 Compression load cell3.3 Penetratio

20、n probe made of hardened steel as shown in Figure 1A 0,8 mm diameter probe with a rounded tip is used. The rounded tip of the probe shall have a radius of 0,4mm.3.4 Fixture for securing the probe to the load cell or to a solid base.3.5 Sample Holder as shown in Figure 2 or equivalent.3.6 Blanking pu

21、nch with an outer diameter matching the diameter of the sample holder shall be used.Licensed Copy: Wang Bin, na, Tue May 16 02:33:53 BST 2006, Uncontrolled Copy, (c) BSIEN 14477:2004 (E)5Dimensions in mm1 210 35 15 Key1 Probe tip 0,8 mm 0,005 mm2 Probe base 2,0 mm 0,010 mmFigure 1 Penetration probeL

22、icensed Copy: Wang Bin, na, Tue May 16 02:33:53 BST 2006, Uncontrolled Copy, (c) BSIEN 14477:2004 (E)6123456789Key1 Probe fixture2Screw3 Probe tip4Nut5 Probe guide6 Friction rubber7 Specimen8 Main body9Diameter 10 mm 0,1 mmFigure 2 Example of a sample holderLicensed Copy: Wang Bin, na, Tue May 16 02

23、:33:53 BST 2006, Uncontrolled Copy, (c) BSIEN 14477:2004 (E)74 CalibrationThe probe should be calibrated after at least 1000 measurements using a standard calibrating film made ofbiaxially oriented PET. The tip of the probe shall at the same time be checked for wear or damage using asuitable microsc

24、ope. The friction rubber shall be replaced at frequent intervals or at signs of wear.5 Test specimensA minimum of 10 specimens shall be cut out evenly spaced across the reel or sheet being tested. Thespecimens shall be conditioned at (23 2)C and (50 5)% RH for 48 hours before testing. The test shall

25、 becarried out at the same conditions.6 Probe speedThe test can be carried out at one of the following speeds expressed in mm/min: 1 - 5 - 10 - 50 - 100.7 Expression and calculation of resultsThe force is expressed in N and the elongation in mm. For the determination of the energy the integral below

26、the graph showing the force and elongation shall be calculated. Calculate the mean value and standarddeviation. A typical graph showing the force and elongation is shown in Figure 3.xNYKeyYForce in NX Elongation in mmFigure 3 Graph showing Force and Elongation (Schematic)Licensed Copy: Wang Bin, na,

27、 Tue May 16 02:33:53 BST 2006, Uncontrolled Copy, (c) BSIEN 14477:2004 (E)88 Precision dataNOTE Precision is not known because interlaboratory data is not available. Repeatability and reproducibility shouldbe determined according to ISO 5725-2, within each laboratory.9 Test reportThe test report sha

28、ll include the following information:a) reference to this method;b) date and place of the test;c) description of the material being tested;d) indication of which side of the specimen is being penetrated;e) speed of the probe;f) force at break in N, elongation at break in mm and energy in mJ;g) any u

29、nusual features noted during the measurements;h) any deviation from the method.Licensed Copy: Wang Bin, na, Tue May 16 02:33:53 BST 2006, Uncontrolled Copy, (c) BSIEN 14477:2004 (E)9BibliographyISO 5725-2 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basicmethod for

30、the determination of repeatability and reproducibility of a standard measurementmethodLicensed Copy: Wang Bin, na, Tue May 16 02:33:53 BST 2006, Uncontrolled Copy, (c) BSIBS EN 14477:2004BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body respon

31、sible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendmen

32、ts or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found

33、on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards pu

34、blications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of thos

35、e that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services

36、are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase pri

37、ce of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about

38、 BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may b

39、e reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and

40、size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.Licensed Copy: Wang Bin, na, Tue May 16 02:33:53 BST 2006, Uncontrolled Copy, (c) BSI