BS EN 14621-2005 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns《纺织品 复丝 变形或非变形长丝纱线用试验方法》.pdf

1、BRITISH STANDARDBS EN 14621:2005Textiles Multifilament yarns Methods of test for textured or non-textured filament yarnsThe European Standard EN 14621:2005 has the status of a British StandardICS 59.080.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49

2、g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Mon Apr 17 08:12:44 BST 2006, Uncontrolled Copy, (c) BSIBS EN 14621:2005This British Standard was published under the authority of the Standards Policy and Strategy C

3、ommittee on 16 January 2006 BSI 16 January 2006ISBN 0 580 ? ?National forewordThis British Standard is the official English language version of EN 14621:2005.The UK participation in its preparation was entrusted to Technical Committee TCI/24, Textiles, physical testing, which has the responsibility

4、to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International

5、Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Stan

6、dard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European d

7、evelopments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 19 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicatio

8、nAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Mon Apr 17 08:12:44 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14621December 2005ICS 59.080.20English VersionTextiles - Multifilament yarns - Methods of test for textured ornon-textured filament yarnsTexti

9、les - Multifilaments - Mthodes dessais pour la frisuredes fils multifilaments texturs et le retrait thermique desfils plats et texturesTextilien - Multifilamentgarne - Prfverfahren fr texurierteund nicht texturierte MultifilamentgarneThis European Standard was approved by CEN on 26 October 2005.CEN

10、members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on applica

11、tion to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the s

12、ame status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slo

13、venia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN nat

14、ional Members.Ref. No. EN 14621:2005: ELicensed Copy: Wang Bin, na, Mon Apr 17 08:12:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14621:2005 (E) 2 Contents page Foreword 3 1 Scope.4 2 Normative references .4 3 Terms and definitions.4 4 Test methods.5 5 Test report .14 Annex A (informative) Calculation

15、of the length of yarn to be reeled16 Bibliography.19 Licensed Copy: Wang Bin, na, Mon Apr 17 08:12:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14621:2005 (E) 3 Foreword This European Standard (EN 14621:2005) has been prepared by the Technical Committee CEN /TC 248 “Textiles and Textile Products“, the

16、secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. According to the C

17、EN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour

18、g, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Mon Apr 17 08:12:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14621:2005 (E) 4 1 Scope This European Standard specifies test methods for quality control of te

19、xtured and non-textured multifilament synthetic yarns. It includes the following test methods: determination of the crimp contraction - textured multifilament yarn with linear density up to 500 dtex; determination of the hot air shrinkage - for non-textured and textured multifilament yarns; determin

20、ation of the boiling water shrinkage - for non-textured and textured multifilament yarns. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the lates

21、t edition of the referenced document (including any amendments) applies. EN ISO 139, Textiles Standard atmospheres for conditioning and testing (ISO 139:2005) 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 crimp contraction contract

22、ion of a textured filament yarn resulting from the development of crimp, expressed as a percentage of its original length, with the lengths of the contracted and straightened yarns measured under specified tensions 3.2 thermal shrinkage decrease in length of a textured or non-textured filament yarn

23、as a result of a thermal treatment (boiling water or hot air), expressed as a percentage of its original length 3.3 linear density mass per unit length of a multifilament yarn as defined in EN ISO 2060 3.4 tension tensile force applied to the specimen, generally related to its linear density 3.5 pre

24、-tension tension applied to a specimen at the beginning of certain tests 3.6 straightened length length of the specimen measured under a high tensile force, which straightens the skein without stretching 3.7 contracted length of textured yarn length of the specimen measured under a low tensile force

25、 after a specified recovery time has elapsed Licensed Copy: Wang Bin, na, Mon Apr 17 08:12:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14621:2005 (E) 5 3.8 package form of presentation of the multifilament yarn, e.g. spool, cheese, cone, bobbin etc. 3.9 multifilament yarn yarn composed of several fila

26、ments 4 Test methods 4.1 Determination of the crimp contraction 4.1.1 Principle The crimp of a specimen of a textured filament yarn in the form of a skein of known nominal linear density is developed by treatment with hot air while the specimen is subjected to a low tensile force. After reconditioni

27、ng, the straightened length of the skein is measured under a high tensile force. After a specified recovery time, the contracted length of the skein, shortened by the effect of the yarn crimp, is measured under the low tensile force. Crimp contraction is calculated as the difference between the two

28、length values related to the straightened length. 4.1.2 Apparatus 4.1.2.1 Reel A reel with a circumference of (1 000 2,5) mm is used for winding the yarn skeins. The reel shall be fitted with a device to provide the specified tensile force per unit linear density to the material being wound on with

29、the maximum possible accuracy and to maintain the separation between a number of skeins wound at the same time. 4.1.2.2 Automatic testing device A suitable testing device (see Figure 1) uses a loading apparatus, which extends the skein at a speed of (1 000 10) mm/min until the pre-set tensile force

30、is reached at which the yarn crimp is pulled out, and which determines the straightened skein length related to that tensile force. NOTE The speed of the loading apparatus may be reduced e.g. in case of less extensible textured yarns, for example to 250 mm/min, provided that this is clearly stated i

31、n the test report. Only test results obtained with identical speeds may be compared. The same apparatus determines in a second measurement the contracted length of the skein under a low tensile force provided by a pre-tension weight attached to the skein or a hook-shaped pre-tension weight attached

32、to the skein. Resolution of the length measurement is 0,05 mm or better. A number of skeins are arranged in a holder, with the skeins being tested in succession. The holder can be removed from the automatic testing device. Licensed Copy: Wang Bin, na, Mon Apr 17 08:12:44 BST 2006, Uncontrolled Copy,

33、 (c) BSIEN 14621:2005 (E) 6 12345Key 1 Specimen holder 2 Specimen 3 Pre-tension weight (e.g. an S-shaped hook) 4 Loading apparatus and length measuring system 5 Force measuring system Figure 1 Automatic testing device 4.1.2.3 Oven with forced ventilation The oven shall be suitable for a heat treatme

34、nt of the test specimens arranged in the holder of the automatic testing device at 120 C. The temperature variation from the set value shall not exceed 4 C in the immediate vicinity of the specimens. The utilizable space shall have a height of at least 600 mm and suitable width and depth to accommod

35、ate the holder of the automatic testing device in an upright position, so that the skeins can hang perfectly. The oven shall be operated with forced air circulation. Licensed Copy: Wang Bin, na, Mon Apr 17 08:12:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14621:2005 (E) 7 4.1.3 Conditioning and prepar

36、ation of the test specimens Take off at least 500 m from the packages representing the laboratory samples before preparing the test specimens. Prior to testing, the specimens are exposed for at least 24 h to the standard atmosphere according to EN ISO 139. To permit the use of the same linear densit

37、y related tensile forces for yarns of different linear density, a skein is produced having a linear density of about 2 500 dtex (250 tex) by winding a corresponding length of yarn onto a reel. While the yarn is being reeled, a tensile force per unit linear density of 2 cN/tex 10 % shall be maintaine

38、d as uniformly as possible. (See Annex A for the calculation of the length of yarn to be reeled.) The two yarn ends shall then be tied together, but in such a way that stretching of the yarn is avoided. When suspending the skeins from the specimen holder, the knots are placed at the suspension hooks

39、. Throughout the sampling and conditioning procedures, particular care should be taken that any stress applied to the specimens in the course of handling does not exceed the tensile force applied during reeling. 4.1.4 Procedure After the skein is removed from the winding reel, it is suspended from t

40、he holder of the automatic testing device, and a tension weight of 2,5 cN (e.g. an S-shaped hook) is attached to the skein to produce the required tensile (force per unit linear density of 0,01 cN/tex) which remains on the skein throughout the whole testing procedure. Following this, the holder with

41、 the skeins is placed into the oven preheated to a temperature of (120 4) C, with its forced air circulation in operation, and is kept there for a period of 10 min 20 s to develop the crimp. Placing the holder into the oven shall be carried out within a time of 5 s to 10 s to minimize the temperatur

42、e drop in the oven. When the crimp development time has elapsed, the holder with the specimens is removed from the oven and exposed again to the standard atmosphere for 24 h for reconditioning and relaxation. NOTE 1 The period of conditioning the specimens after reeling as well as after the heat tre

43、atment may be reduced, e.g. to 30 min, provided that this is clearly stated in the test report. Only test results obtained with identical conditioning periods may be compared. NOTE 2 Polypropylene or polyethylene may be tested under different conditions of time and temperature, provided that this is

44、 clearly stated in the test report. Only test results obtained under identical test conditions may be compared. To determine the straightened length L0, the holder with the specimens is placed into the automatic testing device tester. Thereafter, starting with the first specimen in the holder, the l

45、oading apparatus gradually extends the skein until a tensile force of 500 cN (i.e. 2 cN/tex 5 %) is reached. This force is maintained for (10 1) s, and after this, the straightened length L0is measured. Following the determination of the straightened length, the loading apparatus travels in the oppo

46、site direction to release the tensile force on the skein. The specimen holder now turns to the next position, and the loading apparatus subjects the next skein to the same tensile force. After all specimens in the holder have been tested, and after a relaxation period of 10 min 20 s has elapsed, the

47、 contracted length L1of each skein under the pre-tension weight of 2,5 cN is measured by the same loading apparatus. Licensed Copy: Wang Bin, na, Mon Apr 17 08:12:44 BST 2006, Uncontrolled Copy, (c) BSIEN 14621:2005 (E) 8 4.1.5 Calculation and expression of the results The crimp contraction, CC, exp

48、ressed in percent, is calculated from the following equation: 010100LLLCC= (%) where L0 is the straightened length; L1 is the contracted length. 4.2 Determination of the hot air shrinkage 4.2.1 Principle Skeins of known nominal linear density are subjected to a low tensile force and treated with hot

49、 air at a specified temperature for a specified time. The skein length is measured under a specified tensile force suitable to straighten the skein before and after the heat treatment. Shrinkage is calculated as the difference between the two length values related to the length before the heat treatment. 4.2.2 Apparatus 4.2.2.1 Reel A reel with a circumference of (1 000 2,5) mm is used for winding the yarn skeins. The reel shall be fitted with a device to provide the specified tensile force per unit linear density to the material