BS EN 14965-2005 Inland navigation vessels - Flat bollards《内河航行船舶 平直系缆柱》.pdf

1、BRITISH STANDARDBS EN 14965:2005Inland navigation vessels Flat bollardsThe European Standard EN 14965:2005 has the status of a British StandardICS 47.020.50; 47.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g4

2、8g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 2006, Uncontrolled Copy, (c) BSIBS EN 14965:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 1 March 2006 BSI 1 March 2006

3、ISBN 0 580 47905 6National forewordThis British Standard is the official English language version of EN 14965:2005.The UK participation in its preparation was entrusted by Technical Committee SME/32, Ships and marine technology, to Subcommittee SME/32/7, Inland navigation vessels, which has the resp

4、onsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “

5、International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with

6、a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international

7、and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued

8、.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14965December 2005ICS 47.020.50; 47.060English VersionInland navigation vessels - Flat bollardsBateaux de n

9、avigation intrieure - Bittes plates Fahrzeuge der Binnenschifffahrt - FlachpollerThis European Standard was approved by CEN on 14 November 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a na

10、tional standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in an

11、y other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland,

12、 France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGM

13、anagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14965:2005: ELicensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 2006, Uncontrolled Copy, (c) BSIEN 14965:2005 (E) 2 Contents

14、 Page Foreword .3 1 Scope4 2 Normative references.4 3 Dimensions.4 4 Material .5 5 Design.5 5.1 Type 5 5.2 Machining .5 5.3 Fastening5 6 Designation.5 7 Marking .5 8 Manufacturers certificate 6 Annex A (normative) Flat bollards made of cast steel.7 A.1 Material .7 A.2 Heat treatment 7 A.3 Dimensions

15、 of the cast steel7 A.4 Fastening7 Bibliography8 Licensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 2006, Uncontrolled Copy, (c) BSIEN 14965:2005 (E) 3 Foreword This document (EN 14965:2005) has been prepared by Technical Committee CEN/TC 15 “Inland navigation vessels”, the secretariat of which is

16、 held by DIN. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. Flat bollards have proven successful in push-towin

17、g. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

18、 Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 2006, Uncontrolled Copy, (c) BSIEN 14965:2005 (E) 4 1 Scope This European Standard specifies dimensions, m

19、aterial, design and designation of flat bollards used preferably for pushing vessels and for guiding ropes of coupling devices, e.g. according to EN ISO 6218, on push-tows. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated ref

20、erences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2768-1, General tolerances Part 1: Tolerances for linear and angular dimensions without individual tolerance indications ISO 8062, Castings System of

21、 dimensional tolerances and machining allowances 3 Dimensions For general tolerances for sheet steel, class c of ISO 2768-1 shall apply. For general tolerances for cast steel, class CT 12 of ISO 8062 shall apply. The design need not correspond to the design illustrated, compliance is only required w

22、ith the main dimensions given in Table 1. Dimensions in millimetres Table 1 Main dimensions h d ad1 h1 175 400 75 300 115 Figure 1 Flat bollard Licensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 2006, Uncontrolled Copy, (c) BSIEN 14965:2005 (E) 5 4 Material Steel with tensile strength of 450 N/mm2

23、and yield point of 230 N/mm2. 5 Design 5.1 Type Flat bollards may be made: of cast steel type (G) according to Annex A or welded steel sheets, type (W). 5.2 Machining All edges shall be rounded. The surface in contact with the ropes (rope groove) shall not have any scratches or ridges. The top of th

24、e bollard shall be of anti-slip design, e.g. welded-on studs. 5.3 Fastening Bollards shall be welded with a continuous, circumferential fillet weld with a weld thickness of 7 mm. The manufacturer shall supply a description with the following information on the fastening: material to which the flat b

25、ollard may be fastened; dimensioning of the fastening; flat bollards shall be welded to reinforced deck areas; position of the nose. 6 Designation Designation of a flat bollard as specified in this standard of type (G): Flat bollard EN 14965 G 7 Marking 7.1 Flat bollards shall be marked with: EN 149

26、65; name or logo of the manufacturer. 7.2 The marking shall be permanently embossed or raised and be legible after installation of the bollard. Licensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 2006, Uncontrolled Copy, (c) BSIEN 14965:2005 (E) 6 8 Manufacturers certificate The manufacturer shall

27、declare that the flat bollards comply with this standard. Licensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 2006, Uncontrolled Copy, (c) BSIEN 14965:2005 (E) 7 Annex A (normative) Flat bollards made of cast steel A.1 Material Cast steel GS-450, material number 1.0446 as specified in EN 10027-2. A

28、.2 Heat treatment Normalized as specified in EN 10052. A.3 Dimensions of the cast steel See Figure A.1 Dimensions in millimetres Figure A.1 Flat bollard made of cast steel A.4 Fastening Circumferential fillet weld with a weld thickness of 7 mm. Licensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 20

29、06, Uncontrolled Copy, (c) BSIEN 14965:2005 (E) 8 Bibliography 1 EN 10027-2, Designation systems for steel Part 2: Numerical system 2 EN 10052, Vocabulary of heat treatment terms for ferrous products 3 EN ISO 6218, Inland navigation vessels Manually operated coupling devices for push tows - Safety r

30、equirements and main dimensions (ISO 6218:2005). Licensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 2006, Uncontrolled Copy, (c) BSIblankLicensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 2006, Uncontrolled Copy, (c) BSIBS EN 14965:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards I

31、nstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards s

32、hould make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical commi

33、ttee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrder

34、s for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it i

35、s BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters

36、Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments

37、and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards On

38、line can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Cop

39、yright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the

40、 standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.Licensed Copy: Wang Bin, na, Tue May 09 04:12:43 BST 2006, Uncontrolled Copy, (c) BSI