BS EN 15016-2-2004 Technical drawings - Railway applications - Part 2 Parts lists《技术制图 轨道交通 第2部分 零件目录表》.pdf

1、BS EN 15016-2:2004ICS 01.100.01; 45.020NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDTechnical drawings Railway applicationsPart 2: Parts listsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/11/2009 07:01, Uncontrolled Copy, (c) BSIThis British Stand

2、ardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 July2009. BSI 2009ISBN 978 0 580 68445 6Amendments/corrigenda issued since publicationDate CommentsBS EN 15016-2:2004National forewordThis British Standard is the UK implementation of EN 15016-2:2004.The UK partic

3、ipation in its preparation was entrusted to TechnicalCommittee RAE/1, Railway applications.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible fo

4、r its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/11/2009 07:01, Uncontrolled Copy, (c) BSIBS EN 15016-2:2004EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15016-2June 2004ICS 01.100.

5、01English versionTechnical drawings - Railway applications - Part 2: Parts listsDessins techniques - Applications ferroviaires - Partie 2:Listes de picesTechnische Zeichnungen - Bahnanwendungen - Teil 2:StcklistenThis European Standard was approved by CEN on 9 January 2004.CEN members are bound to c

6、omply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Se

7、cretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the offi

8、cialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden,

9、Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No.

10、 EN 15016-2:2004: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/11/2009 07:01, Uncontrolled Copy, (c) BSIBS EN 15016-2:2004EN 15016-2:2004 (E) 2 Contents page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions5 4 Characteristic features of parts lists .

11、6 4.1 General6 4.2 Base.6 4.3 Size 6 4.4 Border .6 4.5 Centring marks.6 4.6 Characteristics of lines and entries .6 5 Specification.7 5.1 Title block .7 5.2 Columns and lines .7 5.3 Data fields.7 6 Entry rules 10 Annex A (normative) Title block .11 Annex B (normative) General layout 17 Annex C (info

12、rmative) Example of a multilingual parts list19 Bibliography 21 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/11/2009 07:01, Uncontrolled Copy, (c) BSIBS EN 15016-2:2004EN 15016-2:2004 (E) 3 Foreword This document (EN 15016-2:2004) has been prepared by Technical Committee CEN/TC 256 “Rai

13、lway applications“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2004, and conflicting national standards shall be withdrawn at the latest by D

14、ecember 2004. This document has been prepared under a mandate (M024) given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This document has been prepared under Mode 4 co-operation with CENELEC TC9X. In the event of a

15、n amendment being required to this standard, the co-op TC will be consulted before proceeding to amend this document. Particular considerations were made to standardize the computerised transfer of the content of the documents, its output on conventional information carrier and its reproduction with

16、out loss of quality. Remarks in international standards with regard to document handling are respected and supported by this standard and if necessary adopted or completed to the well-established procedures in the European railway business. This European Standard “Technical drawings Railway applicat

17、ions” consists of the following parts: EN 15016-1: General principles EN 15016-2: Parts lists EN 15016-3: Handling of modifications of technical documents prEN ISO 21267-4: Data exchange The annexes A and B are normative. Annex C is informative. According to the CEN/CENELEC Internal Regulations, the

18、 national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Polan

19、d, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/11/2009 07:01, Uncontrolled Copy, (c) BSIBS EN 15016-2:2004EN 15016-2:2004 (E) 4 Introduction In railway business, the customer very often requires, as part of a

20、contract, technical documents in a certain form. In order to support co-operation and effective exchange of information between customers, suppliers and partners, it is necessary to have the document requirements precisely defined. This European Standard refers to EN, ISO or IEC standards dealing wi

21、th technical drawings. In cases where ISO or IEC standards are not sufficiently precise, this standard gives specific details. These additions to EN, ISO and IEC standards facilitate the exploitation and the administration of the drawings. These requirements have been drawn up in order to accommodat

22、e: the large variety of users; ease of transfer of documents; any specific series of documentation related to the railway material they define. Special consideration has been given to those producing drawings by computer or microcopying and their reproduction without loss of quality. NOTE The range

23、of documents covers documents such as specifications, conditions for acceptance or further technical specifications which may not be graphically represented. This is meant to highlight the difference between “graphical representation“ and “verbal description“. Licensed Copy: Wang Bin, ISO/EXCHANGE C

24、HINA STANDARDS, 16/11/2009 07:01, Uncontrolled Copy, (c) BSIBS EN 15016-2:2004EN 15016-2:2004 (E) 5 1 Scope This European Standard specifies the requirements for the preparation and reproduction of design parts lists for railway applications. This European Standard specifies the design parts list an

25、d describes the basic principles, their structure and the minimum requirements of a design parts list. The European Standard applies throughout the total life span of the parts list. This standard applies to all the railway organisations and partners concerned with the design parts list, and to supp

26、liers preparing parts list on behalf of network users. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter.

27、For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 15016-1, Technic

28、al drawings Railway applications Part 1: General principles . EN ISO 216:2001, Writing paper and certain classes of printed matter Trimmed sizes A and B series (ISO 216:1975). EN 61355, Classification and designation of documents for plants, systems and equipment (IEC 61355:1997). EN ISO 10209-2:199

29、6, Technical product documentation Vocabulary Part 2: Terms relating to projection methods (ISO 10209-2:1994). ISO 639, Codes for the representation of languages Part 1: Alpha-2 code. ISO 1000, SI units and recommendations for the use of their multiples and of certain other units. ISO 4882, Office m

30、achines and data processing equipment Line spacings and character spacings. ISO 10209-1:1992, Technical product documentation Vocabulary Part 1: Terms relating to technical drawings: General and types of drawings. ISO 16016, Technical product documentation Protection notices for restricting the use

31、of documents and products. 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in ISO 10209-1:1992 and EN ISO 10209-2:1996 and the following apply. NOTE In contrast to the use of the term item list in ISO 10209-1:1992, 3.12, the term parts list is used

32、 in this series of standards in accordance with common practise. The parts list is the main document to describe an object, independent of the hierarchy in which the object is situated in the product structure. There is no difference between an assembly and detail parts list. 3.1 parts list formally

33、 built-up list for an object, complete as regards to specific purpose and containing all the necessary documents and articles appertaining thereto, giving their name, item number, quantity and unit. Only those summaries are designated in the parts lists which relate to the quantity 1 of an object Li

34、censed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/11/2009 07:01, Uncontrolled Copy, (c) BSIBS EN 15016-2:2004EN 15016-2:2004 (E) 6 3.2 design parts list created in the design phase where the final product is defined NOTE It defines the design and is neutral with respect to workshop. 4 Characte

35、ristic features of parts lists 4.1 General A parts list can be presented as follows: as a separate document without drawing; as a separate document with relation to a drawing (separate parts list); entered on a drawing. Any sheet of parts lists shall bear an identification number. When more sheets t

36、ogether form an entity, it shall be clearly indicated on the first sheet which and how many sheets form the entity. All pages of the parts list should correspond with the specimen shown in annex B. Requirements for copying and scanning are to be defined. 4.2 Base Parts list as a separate document sh

37、all preferably be printed on white paper with a minimum weight of 70 g/m. In case of entering parts lists on drawing sheets, see EN 15016-1. 4.3 Size Separate parts lists shall be to A4 size in accordance with EN ISO 216:2001, series A. 4.4 Border The border is shown in annex B. 4.5 Centring marks R

38、eference marks for centring required for the adjustment of the position of the parts list on the setting plane of the photographic copying device, appear in the margin at the locations defined in annex B. 4.6 Characteristics of lines and entries 4.6.1 Optical density All lines and entries including

39、those added during revision should have a contrast of at least 0,7 with respect to base according to EN ISO 6428. 4.6.2 Line wideness of separate parts lists Printed parts lists shall fulfil the same requirements as parts lists on drawings for microcopying and scanning suitability. For fulfilling th

40、ese requirements, it is recommended to use line wideness according to Table 1. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/11/2009 07:01, Uncontrolled Copy, (c) BSIBS EN 15016-2:2004EN 15016-2:2004 (E) 7 Table 1 Line widenesses Wideness (mm) Borderlines 0,7 Main lines 0,35 Other lines

41、0,25 4.6.3 Characteristics of lettering Separate parts lists shall be printed with lettering having height between 2,3 mm and 2,6 mm and a width of 2,5 mm to ensure microcopying and scanning legibility. The line and character spacing shall be in accordance with ISO 4882. Entries in parts list on dra

42、wings shall be in accordance with EN 15016-1. 5 Specification 5.1 Title block A title block, intended for taking the necessary headings for identification and use, shall appear on all parts lists. It is recommended to use the same title block format on all pages of the parts list. It is permissible

43、to use a reduced version on the pages following page 1; this block shall as a minimum have the same identification zone as shown in annex A. The mandatory requirements of the title block are defined in annex A. 5.2 Columns and lines The parts list consists of eight columns for the entry of various d

44、ata describing the items required for analysis and interpretation of the drawing. The columns are separated from each other by a continuous line of at least 0,35 mm wideness. The layout of separate parts list is given in annex B. 5.3 Data fields 5.3.1 General The data fields of the parts lists are g

45、iven in Table 2 (see also annex B). Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/11/2009 07:01, Uncontrolled Copy, (c) BSIBS EN 15016-2:2004EN 15016-2:2004 (E) 8 Table 2 Data fields Column Column text Character type Text alignment Language dependency 1 Item number alphanumerical right N

46、o 2 Quantity, no. of pieces alphanumerical right No 3 Unit alphanumerical centre No 4 Title, designation, name of item alphanumerical left Yes 5 Item number, standard code designation alphanumerical left No 6 Material/ technical data alphanumerical left Yes 7 Mass/unit numerical centre No 8 Remark a

47、lphanumerical left Yes 5.3.2 Item reference Identical parts shown in the same assembly should have the same item reference. The item reference is a number which is added as a serial characteristic to objects listed in parts lists and shown on drawings. The reference number shall be rising graded. If

48、 a revision causes an item to be removed from a parts list, the remaining items retain their numbers, thus reducing the need to revise the drawing and other associated documentation. The field “Item number“ may be left empty in the parts list section for a single part. 5.3.3 Quantity, number of piec

49、es The column shows the total number of that particular item necessary for one complete assembly (see ISO 7573). If reference to a document shall be given in this column, a capital cross (X) shall be entered (see annex C). When the quantity needed cannot be specified at the design stage or if it is not necessary to specify, the capital letter N (meaning: not defined) shall be given in the field “Quantity“. 5.3.4 Unit Refers to the unit of measure for the quantity. The SI units according to ISO 1000 including their multiples sh