1、BRITISH STANDARDBS EN 15088:2005Aluminium and aluminium alloys Structural products for construction works Technical conditions for inspection and deliveryThe European Standard EN 15088:2005 has the status of a British StandardICS 77.150.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g
2、44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Tue Apr 18 08:11:43 BST 2006, Uncontrolled Copy, (c) BSIBS EN 15088:2005This British Standard was published under the authority of t
3、he Standards Policy and Strategy Committee on 25 January 2006 BSI 25 January 2006ISBN 0 580 46933 6National forewordThis British Standard is the official English language version of EN 15088:2005.The UK participation in its preparation was entrusted to Technical Committee NFE/35, Light metals and th
4、eir alloys, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue u
5、nder the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct ap
6、plication. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; mon
7、itor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 29 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last
8、issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Tue Apr 18 08:11:43 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15088December 2005ICS 77.150.10English VersionAluminium and aluminium alloys - Structural products fo
9、rconstruction works - Technical conditions for inspection anddeliveryAluminium et alliages daluminium - Produits pourapplications de structure pour construction - Conditionstechniques de contrle et de livraisonAluminium und Aluminiumlegierungen - Erzeugnisse frTragwerksanwendungen - Technische Liefe
10、rbedingungenThis European Standard was approved by CEN on 12 May 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographic
11、al references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN memb
12、er into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan
13、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights
14、of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15088:2005: ELicensed Copy: Wang Bin, na, Tue Apr 18 08:11:43 BST 2006, Uncontrolled Copy, (c) BSIEN 15088:2005 (E) 2 Contents Page Foreword 3 Introduction4 1 Scope .5 2 Normative references .5 3 Term
15、s and definitions.7 4 Requirements 9 4.1 Ordering Information 9 4.2 Selection of alloy and temper 9 4.3 Product requirements.9 5 Evaluation of conformity 12 5.1 General 12 5.2 Testing .12 5.3 Factory production control (FPC)14 5.4 One-off products, prototypes and products produced in very small quan
16、tities16 6 Marking, labelling and packaging17 Annex A (normative) Fatigue testing and design of extruded, rolled or forged products 18 A.1 General 18 A.2 Fatigue testing of the constituent material (extruded, rolled or forged products).18 A.3 Test piece for fatigue testing .19 A.4 Design code.19 Ann
17、ex B (normative) Bendability.20 B.1 General 20 B.2 Bendability classes.21 B.3 Assignment to standardized tempers of semi-finished products .22 Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products Directive CPD EU Directive 89/106/EEC24 ZA.1 S
18、cope and relevant characteristics .24 ZA.2 Procedures for the attestation of conformity of structural metallic construction products .25 ZA.3 CE marking and labelling .27 Bibliography.29 Licensed Copy: Wang Bin, na, Tue Apr 18 08:11:43 BST 2006, Uncontrolled Copy, (c) BSIEN 15088:2005 (E) 3 Foreword
19、 This document (EN 15088:2005) has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at th
20、e latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. This document has been prepared under the mandate M 120 given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Construction Pro
21、ducts Directive CPD 89/106/EEC. For relationship with EU Construction Products Directive CPD, see informative Annex ZA, which is an integral part of this document and which it becomes a harmonized European Standard. Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG
22、 14 “General Support“ to prepare the following standard : EN 15088 “Aluminium and aluminium alloys Structural products for construction works Technical conditions for inspection and delivery“. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following co
23、untries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switz
24、erland and United Kingdom. Licensed Copy: Wang Bin, na, Tue Apr 18 08:11:43 BST 2006, Uncontrolled Copy, (c) BSIEN 15088:2005 (E) 4 Introduction This European Standard is an “umbrella“ standard which gives the regulatory requirements to enable manufacturers or their agents to affix CE marking, in ac
25、cordance with Directive 89/106/EEC (Construction Products Directive CPD) to products within the scope of this European Standard. It is intended to be used in conjunction with other referenced material/ product standards (see Figure 1). A manufacturer who has no knowledge of its final destination may
26、 sell a product to a stockist. It is the responsibility of the manufacturer, that the product complies with the conditions of CE marking for the stated intended use included as part of the CE marking. If the stockist resells the product for another intended use or changes the product in a way, he in
27、 effect becomes a new manufacturer. Consequently, he becomes responsible for the appropriate CE marking of the product that he places on the market. Therefore, irrespective of current terminology in terms of regulatory marking there will only ever be two parties, the seller (the manufacturer) and th
28、e buyer (the purchaser). Products CE marked in accordance with this harmonized European Standard can be presumed to have the performances stated with the CE marking. This does not replace the responsibility on the designer to ensure that the final structural product made of aluminium as a whole is c
29、orrectly designed and its components meet the necessary performance values depending on the design, especially in view of fatigue design. Figure 1 Relationship between standards Licensed Copy: Wang Bin, na, Tue Apr 18 08:11:43 BST 2006, Uncontrolled Copy, (c) BSIEN 15088:2005 (E) 5 1 Scope This Euro
30、pean Standard specifies requirements for semi-finished products and castings of aluminium and aluminium alloys for load-bearing structural construction works (Construction works covers building and civil engineering works). It also specifies requirements for evaluation of conformity and the test met
31、hods to be used. It does not apply to products after machining or joining operations (e.g. bolting, welding of elements), which can be found in other European Standards, e.g. prEN 1090-1. 2 Normative references The following referenced documents are indispensable for the application of this document
32、. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 485-1, Aluminium and aluminium alloys Sheet, strip and plate Part 1: Technical conditions for inspection and delivery. EN 485-2, Alumin
33、ium and aluminium alloys Sheet, strip and plate Part 2: Mechanical properties. EN 485-3, Aluminium and aluminium alloys Sheet, strip and plate Part 3: Tolerances on dimensions and form for hot-rolled products. EN 485-4, Aluminium and aluminium alloys Sheet, strip and plate Part 4: Tolerances on shap
34、e and dimensions for cold-rolled products. EN 515, Aluminium and aluminium alloys - Wrought products - Temper designations. EN 573-3, Aluminium and aluminium alloys Chemical composition and form of wrought products Part 3: Chemical composition. EN 586-1, Aluminium and aluminium alloys Forgings Part
35、1: Technical conditions for inspection and delivery. EN 586-2, Aluminium and aluminium alloys Forgings Part 2: Mechanical properties and additional property requirements. EN 586-3, Aluminium and aluminium alloys Forgings Part 3: Tolerances on dimensions and form. EN 754-1, Aluminium and aluminium al
36、loys Cold drawn rod/bar and tube Part 1: Technical conditions for inspection and delivery. EN 754-2, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 2: Mechanical properties. EN 754-3, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 3: Round bars, tolerances on dimens
37、ions and form. EN 754-4, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 4: Square bars, tolerances on dimensions and form. EN 754-5, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 5: Rectangular bars, tolerances on dimensions and form. EN 754-6, Aluminium and alumin
38、ium alloys Cold drawn rod/bar and tube Part 6: Hexagonal bars, tolerances on dimensions and form. Licensed Copy: Wang Bin, na, Tue Apr 18 08:11:43 BST 2006, Uncontrolled Copy, (c) BSIEN 15088:2005 (E) 6 EN 754-7, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 7: Seamless tubes, tole
39、rances on dimensions and form. EN 754-8, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 8: Porthole tubes, tolerances on dimensions and form. EN 755-1, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 1: Technical conditions for inspection and delivery. EN 755
40、-2, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 2: Mechanical properties. EN 755-3, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 3: Round bars, tolerances on dimensions and form. EN 755-4, Aluminium and aluminium alloys Extruded rod/bar, tube an
41、d profiles Part 4: Square bars, tolerances on dimensions and form. EN 755-5, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 5: Rectangular bars, tolerances on dimensions and form. EN 755-6, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 6: Hexagonal
42、bars, tolerances on dimensions and form. EN 755-7, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 7: Seamless tubes, tolerances on dimensions and form. EN 755-8, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 8: Porthole tubes, tolerances on dimensio
43、ns and form. EN 755-9, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Part 9: Profiles, tolerances on dimensions and form. prEN 1090-3, Technical requirements for the execution of aluminium structures. EN 1301-1, Aluminium and aluminium alloys Drawn wire Part 1: Technical conditi
44、ons for inspection and delivery. EN 1301-2, Aluminium and aluminium alloys Drawn wire Part 2: Mechanical properties. EN 1301-3, Aluminium and aluminium alloys Drawn wire Part 3: Tolerances on dimensions. EN 1386, Aluminium and aluminium alloys Tread plate Specifications. EN 1396, Aluminium and alumi
45、nium alloys Coil coated sheet and strip for general applications Specifications. EN 1559-1, Founding Technical conditions of delivery Part 1: General. EN 1559-4, Founding Technical conditions of delivery Part 4: Additional requirements for aluminium alloy castings. EN 1592-1, Aluminium and aluminium
46、 alloys HF seam welded tubes Part 1: Technical conditions for inspection and delivery. EN 1592-2, Aluminium and aluminium alloys HF seam welded tubes Part 2: Mechanical properties. EN 1592-3, Aluminium and aluminium alloys HF seam welded tubes Part 3: Tolerances on dimensions and form for circular t
47、ubes. Licensed Copy: Wang Bin, na, Tue Apr 18 08:11:43 BST 2006, Uncontrolled Copy, (c) BSIEN 15088:2005 (E) 7 EN 1592-4, Aluminium and aluminium alloys HF seam welded tubes Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes. EN 1706, Aluminium and aluminium alloys Ca
48、stings Chemical composition and mechanical properties. prEN 1999-1-1, Eurocode 9: Design of aluminium structures Part 1-1: General rules prEN 1999-1-3, Eurocode 9: Design of aluminium structures Part 1-3: Additional rules for structures susceptible to fatigue. prEN 1999-1-4, Eurocode 9: Design of al
49、uminium structures Part 1-4: Supplementary rules for trapezoidal sheeting. EN 10204, Metallic products Types of inspection documents. EN 12020-1, Aluminium and aluminium alloys Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Part 1: Technical conditions for inspection and delivery. EN 12020-2, Aluminium and aluminium alloys Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 P
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1