BS EN 15094-2008 Safety of machinery Safety requirements for cold flat rolling mills《机械安全 冷轧扁钢厂安全要求》.pdf

1、BS EN 15094:2008ICS 77.180NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDSafety of Machinery Safety requirementsfor cold flat rollingmillsThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 October2008 BSI 20

2、08ISBN 978 0 580 55205 2Amendments/corrigenda issued since publicationDate CommentsBS EN 15094:2008National forewordThis British Standard is the UK implementation of EN 15094:2008.The UK participation in its preparation was entrusted to TechnicalCommittee MCE/23, Safety of metal producing mills.A li

3、st of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal o

4、bligations.BS EN 15094:2008EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15094October 2008ICS 77.180English VersionSafety of Machinery - Safety requirements for cold flat rollingmillsScurit des machines - Prescriptions de scurit relativesaux laminoirs froid pour produits platsSicherheit von Mach

5、inen - Sicherheitsanforderungen anKaltflachwalzwerkeThis European Standard was approved by CEN on 24 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alt

6、eration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by tran

7、slationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany,

8、Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagemen

9、t Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15094:2008: EBS EN 15094:2008EN 15094:2008 (E) 2 Contents Page Foreword6 Introduction .7 1 Scope 8 2 Normative references 9 3 Terms an

10、d definitions .11 4 List of significant hazards 13 5 Safety Requirements and/or measures .13 5.1 General requirements for design, planning and risk assessment .13 5.1.1 Planning of cold flat rolling mills .14 5.1.2 Structural assembly 14 5.1.3 Safety layout.14 5.1.4 Access to operating points.14 5.1

11、.5 Access to danger zones15 5.1.6 Guards 15 5.1.7 Guard-rails16 5.1.8 Safety signs and warning devices .16 5.1.9 Safe guarding.16 5.1.10 Personal protective equipment 16 5.1.11 Electrical equipment16 5.1.12 Hydraulic, pneumatic, cooling and lubrication systems .17 5.1.13 Fluid systems.17 5.1.14 Mate

12、rial to be discharged to drains .17 5.1.15 Surface temperatures and heat radiation17 5.1.16 Pulpits and control stands17 5.1.17 Software manipulation 17 5.1.18 Fire protection17 5.1.19 Ergonomic principles 18 5.1.20 Vibrations .18 5.1.21 Loss of energy .18 5.1.22 Linked Equipment18 5.2 List of signi

13、ficant hazards, hazardous situations, safety requirements and/or measures19 5.2.1 General20 5.2.2 Hydraulics, pneumatics, emulsions and other pressurised fluid systems .20 5.2.3 Bridges over roller tables and material guides 22 5.2.4 Handling, guiding and transfer equipment (general).23 5.2.5 Roller

14、 tables and conveyors.23 5.2.6 Rolling mills, rolling mill stands.24 5.2.7 Pulpits and control stands26 5.2.8 Measuring devices and display units 28 5.2.9 Cutting devices 29 5.2.10 Coiling/de-coiling equipment .30 5.2.11 Coil banding machines and marking machines .33 5.3 Additional safety requiremen

15、ts or measures .33 5.3.1 Hold-to-run control device33 5.3.2 Mechanical restraint devices34 5.3.3 Accessible rotating/moving parts34 5.3.4 Particular ergonomic requirements.34 5.4 Noise reduction as a safety requirement 35 5.4.1 Noise reduction at source by design.35 BS EN 15094:2008EN 15094:2008 (E)

16、 3 5.4.2 Noise reduction by protective measures35 5.4.3 Noise reduction by information .36 5.4.4 Noise sources and examples of noise reduction measures.36 6 Verification of the safety requirements and/or measures.37 7 Information for use38 7.1 General .38 7.2 Warning devices and safety signs.38 7.3

17、Minimum marking38 7.4 Accompanying documents.38 7.4.1 Instruction handbook38 7.4.2 Machine/equipment declaration.38 7.4.3 Detailed information/instructions 39 7.5 Maintenance manual .41 Annex A (normative) Safety requirements and/or measures for electrical equipment and control systems at cold rolli

18、ng mills 43 A.1 General .43 A.2 Special requirements for controls .43 A.3 Special requirements for shut-down equipment44 A.3.1 Stop functions/emergency stop functions .44 A.3.2 Selection of stop functions 44 A.3.3 Emergency stop areas 44 A.3.4 Stop functions .45 Annex B (normative) Noise test code .

19、47 B.1 Introduction47 B.2 Determination of A-weighted sound power level.47 B.3 Determination of A-weighted emission sound pressure levels48 B.3.1 Determination of the emission sound pressure level at specified measuring points .48 B.3.2 Determination of emission sound pressure level at work stations

20、 .48 B.4 Measurement uncertainty.48 B.5 Operating conditions 48 B.6 Information to be recorded and reported49 B.7 Declaration and verification of noise emission values .49 Annex C (normative) Protection of persons in case of using asphyxiant gases in fire fighting systems 52 C.1 General .52 C.2 Warn

21、ing devices 52 C.3 Restraint devices.53 C.4 Preliminary warning time53 C.5 Interrupt device for extinguishing gas 54 C.6 Blocking devices .54 C.7 Pipes .54 C.8 Rooms and adjacent areas.54 C.9 Escape routes 54 C.10 Doors 54 C.11 Marking.55 C.12 Instruction handbook55 Annex D (informative) Example for

22、 manufacturers safety instructions for maintenance at cold flat rolling mills 56 D.1 Precautions to reduce hazards caused by .56 D.1.1 Lack of instructions 56 D.1.2 Visual or audible checks at machinery in motion56 D.1.3 Unintentional movements during maintenance .56 D.1.4 Work during standstill wit

23、h safeguards disabled 57 D.1.5 Work with hazardous substances .57 D.1.6 Plant re-start 57 Annex E (informative) Machines and/or equipment covered by this standard 58 BS EN 15094:2008EN 15094:2008 (E) 4 E.1 Machines and/or equipment covered by this standard but are not limited to 58 E.1.1 Plants 58 E

24、.1.2 Equipment 58 Annex F (informative) Roll spalling .59 F.1 Hazard .59 F.2 Causes 59 F.3 Safety measures 59 Annex G (informative) Example for the risk analysis due to interfaces 60 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/

25、37/EC 61 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 62 Bibliography 63 BS EN 15094:2008EN 15094:2008 (E) 5 Figures Figure 1 Exemplary layout of a cold flat rolling mill 8 Figure G.1 Diagram of a hypothetical plant indi

26、cating potentially hazardous interfaces60 Tables Table 1 Significant hazards, hazardous situations, safety requirements and/or measures20 Table 2 Main noise sources of cold flat rolling mills equipment and exemplary noise reduction measures37 Table A.1 Stop functions.45 Table B.1 Example of declared

27、 dual-number noise emission values for work stations and specified measuring points 51 BS EN 15094:2008EN 15094:2008 (E) 6 Foreword This document (EN 15094:2008) has been prepared by Technical Committee CEN/TC 322 “Equipment for making and shaping of metals”, the secretariat of which is held by DIN.

28、 This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by April 2009. Attention is drawn to the possibility that some of t

29、he elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and suppo

30、rts essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative Annex ZA and B, which is an integral part of this document. This European Standard has been elaborated by CEN/TC 322/WG 3, comprising experts from: Denmark, Germany, Italy, Sweden and the United Kin

31、gdom. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, I

32、taly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15094:2008EN 15094:2008 (E) 7 Introduction This document is a type C standard as stated in EN ISO 12100. The machinery concerned an

33、d the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisio

34、ns of the other standards, for machines that have been designed and built according to the provisions of this type C standard. Where for clarity an example of a preventative measure is given in the text, this should not be considered as the only possible solution. Any other solution leading to the s

35、ame risk reduction is permissible if an equivalent level of safety is achieved. This European Standard assumes that the equipment is operated and maintained by trained personnel. BS EN 15094:2008EN 15094:2008 (E) 8 1 Scope This European Standard specifies the safety requirements for cold rolling mil

36、ls for flat products (coiled or as heavy plates) as defined in 3.1. This European Standard deals with significant hazards, hazardous situations and events relevant to cold rolling mills for flat products. It deals not only with circumstances where the machinery is used as intended, but also includes

37、 other conditions foreseen by the manufacturer, such as foreseeable faults, malfunctions or misuse (see clauses 4 and 5). This European standard applies to: Machinery and equipment used for the manufacturing of metal cold rolled flat products from the material entry station (1), through the forming

38、stations (2), to the exit (3) (see Figure 1). Key 1 entry section 2 cold rolling mill 3 exit section 4 roll changing device 5 border of the plant Figure 1 Exemplary layout of a cold flat rolling mill The following equipment is outside the scope of this European Standard: furnaces in accordance with

39、EN 746-1, EN 746-2 and EN 746-3; pickling plants according to EN 15061; strip processing lines according to EN 15061; abrasive blasting plants according to EN 1248; roll shop equipment; hook conveyors according to EN 619; storage equipment (e. g., high-bay warehouses); cranes, fork lifts, trucks and

40、 railway trucks and other vehicles. BS EN 15094:2008EN 15094:2008 (E) 9 This European Standard is not applicable to cold rolling mills for flat products, manufactured before the date of publication of this standard by CEN. 2 Normative references The following referenced documents are indispensable f

41、or the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 349, Safety of machinery Minimum gaps to avoid crushing of parts of the human body EN 574, Safety of

42、 machinery - Two-hand control devices - Functional aspects - Principles for design EN 614-1:2006, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles EN 614-2, Safety of machinery Ergonomic design principles Part 2: Interactions between the design of machinery

43、and work tasks EN 626-1, Safety of machinery Reduction of risks to health from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers EN 842, Safety of machinery Visual danger signals General requirements, design and testing EN 894-1, Safety of ma

44、chinery Ergonomics requirements for the design of displays and control actuators Part 1: General principles for human interactions with displays and control actuators EN 894-2, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 2: Displays EN 894-3, Saf

45、ety of machinery Ergonomics requirements for the design of displays and control actuators Part 3: Control actuators EN 953, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards EN 981, Safety of machinery System of auditory and visual danger and

46、 information signals EN 982, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics EN 983, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics EN 999, Safety of machinery The positioning of protective equipment in

47、respect of approach speeds of parts of the human body EN 1037:1995, Safety of machinery Prevention of unexpected start-up EN 1063, Glass in building Security glazing Testing and classification of resistance against bullet attack EN 1088, Safety of machinery Interlocking devices associated with guard

48、s - Principles for design and selection EN 1299, Mechanical vibration and shock Vibration isolation of machines Information for the application of source isolation BS EN 15094:2008EN 15094:2008 (E) 10 EN 1837, Safety of machinery Integral lighting of machines EN 12094-1, Fixed firefighting systems C

49、omponents for gas extinguishing systems Part 1: Require-ments and test methods for electrical automatic control and delay devices EN 12198-3, Safety of machinery Assessment and reduction of risks arising from radiation emitted by machinery Part 3: Reduction of radiation by attenuation or screening EN 12254, Screens for laser working places Safety requirements and testing EN 12464-1, Light and lighting Lighting of work places Part 1: Indoor work places EN 13478, Safety of