BS EN 15202-2012 LPG equipment and accessories Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections《液化石油气(LPG)设备和附件 液化石油储气瓶阀门出口和相关设备连.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15202:2012LPG equipment and accessories Essential operationaldimensions for LPG cylindervalve outlet and associatedequipment connectionsBS EN 15202:2012 BRITISH STANDARDNat

2、ional forewordThis British Standard is the UK implementation of EN 15202:2012. Itsupersedes BS EN 15202:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PVE/19, LPG containers and their associated fittings.A list of organizations represented on this

3、 committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 71112 1ICS 23.0

4、60.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2012.Amendments issued since publicationDate Text affectedBS EN 15202:2012EUROPEAN STANDARD NORME EUROP

5、ENNE EUROPISCHE NORM EN 15202 May 2012 ICS 23.060.40 Supersedes EN 15202:2006English Version LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections quipements pour GPL et leurs accessoires - Dimensions oprationnelles essent

6、ielles des connexions des robinets et valves de bouteilles de GPL et des quipements associsFlssiggas-Gerte und Ausrstungsteile - Grundlegende Betriebsmae fr Ausgangsanschlsse von Flaschenventilen fr Flssiggas (LPG) und zugehrige Anschlsse fr Gerte This European Standard was approved by CEN on 13 Apr

7、il 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obta

8、ined on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CE

9、N-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

10、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All ri

11、ghts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15202:2012: EBS EN 15202:2012EN 15202:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .54 Symbols and abbreviations 65 Design .66 Conn

12、ections in use . 417 Unsafe connections 418 Tightening torque . 419 Marking 41Annex A (informative) Connections by country 42Annex B (normative) Unsafe connections . 45Bibliography . 46BS EN 15202:2012EN 15202:2012 (E) 3 Foreword This document (EN 15202:2012) has been prepared by Technical Committee

13、 CEN/TC 286 “Liquefied Petroleum Gas equipment and accessories”, the secretariat of which is held by NSAI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2012, and conflicting national s

14、tandards shall be withdrawn at the latest by November 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes E

15、N 15202:2006. The revisions to this document include: addition of the Introduction; amendment to the Scope; addition of G65 and G66 connections; amendments to Annex B; and Annex B has been changed to normative. Environmental aspects have been considered in the drafting of this standard. According to

16、 the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lat

17、via, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15202:2012EN 15202:2012 (E) 4 Introduction The primary objective of this European Standard is to ensure the safe connection of LPG c

18、ylinder valves to their connectors. This European Standard is the fundamental source for identifying the essential manufacturing dimensions of the LPG cylinder valve connections used in Europe. prEN 16129 is the fundamental source for identifying the essential manufacturing dimensions of other conne

19、ctor types not used with LPG cylinder valves. This European Standard identifies the existing cylinder valves and the connectors that are currently in use with LPG. It is the intention that only connections which are identified in this standard should be used with LPG cylinder valves. This European S

20、tandard lists potentially unsafe connections where it may be possible to connect together, but which, when connected, may not be sound or secure in some operating conditions or orientations. This standard specifies a marking system that is intended to ensure that only valves and connecters that are

21、marked with the same connector type number are used in combination. BS EN 15202:2012EN 15202:2012 (E) 5 1 Scope This European Standard specifies basic connection dimensions of LPG cylinder valves (manufactured in accordance with EN ISO 14245 and EN ISO 15995) and connectors (including pressure regul

22、ators) to enable them to be safely connected together. NOTE 1 Figure 1 (type G.1) to Figure 19 (type G.33) give the types of threaded outlet connections. NOTE 2 Figure 20 (type G.50) to Figure 34 (type G.66) give the types of non-threaded outlet connections. This European Standard lists potentially

23、unsafe connections where it may be possible to connect together, but which, when connected, may not be sound or secure in some operating conditions or orientations. This European Standard specifies a marking system that is intended to ensure that only valves and connecters that are marked with the s

24、ame connector type number are used in combination. This European Standard also recommends tightening torques for the attachment of screwed metal-to-metal connections. Quality assurance systems, production testing and particularly certificates of conformity are not covered in this standard. This Euro

25、pean Standard excludes connections for automotive vehicles covered by UN/ECE Regulation No. 67 Part 1 and EN 13760. This European Standard excludes connections for gas cartridges covered by EN 417. 2 Normative references The following documents, in whole or in part, are normatively referenced in thi

26、s document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 549, Rubber materials for seals and diaphragms for gas appliances and gas equipment

27、 EN 560, Gas welding equipment Hose connections for equipment for welding, cutting and allied processes EN ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation (ISO 228-1) ISO 68-1, ISO general purpose screw threads Basic prof

28、ile Part 1: Metric screw threads ISO 3601-1, Fluid power systems O-rings Part 1: Inside diameters, cross-sections, tolerances and designation codes ANSI/CGA V-1, American National, Compressed Gas Association Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connections ANSI/ASME/B1.5, ACME

29、 Screw Threads issued by American Society of Mechanical Engineers 1990 DIN 477-1, Gas cylinder valves rated for test pressures up to 300 bar; types, sizes, and outlets 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. BS EN 15202:2012EN 15202:2012

30、(E) 6 3.1 liquefied petroleum gas LPG low pressure gas composed of one or more light hydrocarbons which are assigned to UN 1011, UN 1075, UN 1965, UN 1969 or UN 1978 only and which consists mainly of propane, propene, butane, butane isomers, butene with traces of other hydrocarbon gases 3.2 connecto

31、r device that attaches to a cylinder valve to allow the passage of LPG to or from the cylinder 3.3 valve operating mechanism mechanism that opens the valve when, or after, a regulator or connector is fitted and closes the valve automatically when, or before, a regulator or connector is disconnected

32、4 Symbols and abbreviations NBR Nitrile Butadiene Rubber (Acrylonitrile-butadiene rubber) (see ISO 4658). STP Standard Temperature and Pressure 15,6 C (288,7 K), 1,013 bar absolute (0,1013 MPa absolute) IRHD International Rubber Hardness Degrees LH Left hand RH Right hand INT Internal thread EXT Ext

33、ernal thread ref make reference to 5 Design The dimensions shall be in accordance with those given in the following figures. The travel distance of the valve operating mechanisms is identified where required. The drawings show the location of sealing elements where required. Any hexagon nut with a l

34、eft hand (LH) thread shall, for easy identification, have notches (for example a 60V groove) midway at the corners of each adjoining spanner flat. Where concentricity and surface finish are not specified, the requirements shall be as specified by the manufacturer. New valve/connection proposals shal

35、l not make an unsafe connection or interference fit with the valves and connectors shown in this European Standard. BS EN 15202:2012EN 15202:2012 (E) 7 Dimensions in millimetres Key Connector/Nut Seal Thread 1 nut A1 14,80 - 15 B1 16,8 - 17 T1 20 min 2 connector A2 10,5 - 10,6 B2 10,2 - 10,4 T2 18,8

36、38 19,973 3 seal A3 17,4 - 17,5 B3 2,0 2,2 T3 17,696 18,266 4 valve A4 4,8 5,2 Seal material shall be NBR or equivalent, or EN 549 A2/H3 T4 1,814 5 nut thread A5 2,9 3,1 T5 55 6 valve thread A6 14 min Valve T6 R 0,249 A7 20 x 1,814 LH C1 20 x 1,814 LH T7 19,589 19,98 A8 15,15 - 15,26 C2 14,3 14,7 T8

37、 18,703 18,838 A9 2,9 3,1 C3 11,1 11,3 T9 17,317 17,676 A10 11 min C4 6,8 - 7,2 A11 15,8 16,2 C5 R0,3 R0,7 A12 25 A/F C6 6,0 6,313 8,4 max C7 7,0 10,0 C8 11 minC9 0,5 x 90Figure 1 Type G.1 Threaded connection 20 x 1,814 LH - Spanner tightenedBS EN 15202:2012EN 15202:2012 (E) 8 Dimensions in millimet

38、res Key Nut Connector Black Seal1 nut A1 21,8 x 1,814 LH B1 18,5 18,7 C1 17,7 - 18,0 2 connector A2 16 max B2 12,2 12,3 C2 10,7 - 11,0 3 black seal A3 24,6 min B3 11,1 11,3 C3 1,7 2,0 4 seal A4 7,5 min B4 0,9 1,0 Material shall be: a) NBR or equivalent; or 5 valve A5 7,5 8,1 B5 2,0 2,2 b) EN 549 A2/

39、H3 6 nut thread A6 9,9 10,5 B6 2,4 2,6 Thread 7 valve thread A7 12,5 min B7 9,0 max T1 21,8 min A8 5 wings equally spaced B8 A2 0,10,3T2 20,622 20,722 Valve Seal T3 19,444 19,544 D1 21,7 x 1,814 LH E1 13,35 - 13,65 T4 1,814 D2 13 13,1 E2 8,0 - 8,4 T5 60 D3 7,8 8,0 E3 7,5 7,8 T6 R 0,249 D4 8,6 8,7 Ma

40、terial shall be: a) NBR or equivalent; or b) EN 549 A2/H3 T7 21,6 21,7 T8 20,422 20,522 T9 18,7 18,8 Figure 2 Type G.2 Threaded connection 21,7 x 1,814 LH - 60 Hand tightened BS EN 15202:2012EN 15202:2012 (E) 9 Dimensions in millimetres Key Connector Seal 1 connector A1 27 - 27,21 B1 25,7 - 26,3 2 s

41、eal A2 13,9 - 14,1 B2 14,0 - 14,6 3 gasket A3 3,0 - 3,2 B3 1,35 1,65 4 valve A4 6,4 - 6,6 Material shall be: a) NBR or equivalent; or b) EN 549 A2/H3 5 example of one configuration of the inlet/gas passage to the connector A5 13,7 - 13,9 A6 M16 x 1,5-6g A7 1,6 1,8 Valve A8 1,4 1,6 D1 M16 x 1,5 6H A9

42、 3,9 4,1 D2 8,4 8,6 10 1,2 1,4 D3 26,5 27,3 A11 13,4 13,6 D4 1 x 45 Gasket D5 10,3 10,5 C1 7,5 0,15 D6 10,2 10,6 C2 17,0 0,1 D7 1,0 min C3 1,5 0,15 C4 4,0 0,15 Figure 3 Type G.3 Threaded connection M16 x 1,5 RH - Hand tightened BS EN 15202:2012EN 15202:2012 (E) 10 Dimensions in millimetres Key Conne

43、ctor/Nut Seal 1 nut A1 18,8 - 19,2 B1 19,8 - 19,2 2 connector A2 Ra 3,2 B2 11,6 - 12 3 seal A3 11,3 - 11,7 B3 1,9 2,1 4 valve A4 10,8 - 11,2 Material shall be: a) NBR or equivalent; or b) EN 549 A2/H3 A5 11,89 - 12,0 A6 1,7 1,9 A7 4,9 5,1 Valve A8 5,9 6,1 C1 W 21,8 x 1,814 LH DIN 477-1 A9 8 max C2 1

44、2,7 13,3 A10 30 A/F C3 6,8 7,2 A11 16,15 - 16,26 C4 9,0 min A12 21,0 21,3 C5 Ra 3,2 A13 16,0 16,3 C6 11,5 min A14 W 21,8 x 1/1,814 LH DIN 477-1 A15 30,0 30,1 aFor guidance on the selection of aluminium, see EN ISO 11114-1. bFor guidance on the selection of polyamide, see EN ISO 11114-2. Figure 4 Typ

45、e G.4 Threaded connection W 21,8 x 1,814 LH - 55 Spanner tightened BS EN 15202:2012EN 15202:2012 (E) 11 Dimensions in millimetres Key Connector/Nut Seal1 nut A1 29,8 - 30 B1 18,8 - 19,2 2 connector A2 16,15 - 16,26 B2 6,9 - 6,95 3 seal A3 10,3 10,7 B3 1,9 2,1 4 valve A4 R 0,75 The seal material is p

46、olyamidea. A5 16,0 - 16,3 The Connector/Nut and seal also fits G.12 connection A6 21,0 21,3 Valve A7 W 21,8 x 1,814 LH DIN 477-1 C1 W 21,8 x 1,814 LH DIN 477-1 A8 30 A/F C2 12,7 13,3 A9 15,84 - 15,96 C3 6,8 7,2 A10 17 min C4 9,0 min A11 3,9 4,1 C5 Ra 3,2 A12 6,8 7,2 C6 11,5 min A13 18,8 19,2 C7 0,5

47、x 90 14 6,92 - 6,96 A15 3,9 - 4,1 16 Ra 3,2 aFor guidance on the selection of polyamide, see EN ISO 11114-2. Figure 5 Type G.5 Threaded connection W 21,8 x 1,814 LH 55 Spanner tightenedBS EN 15202:2012EN 15202:2012 (E) 12 Dimensions in millimetres Key Connector Seal Valve 1 nut A1 15,8 - 16 B1 59 -

48、61 C1 W 22 x 1,155 LH 2 connector A2 11 - 11,2 B2 15 15,3 C2 15,5 - 15,7 3 seal A3 18,8 - 19 B3 10,8 11,2 C3 11,9 - 12,1 4 valve A4 2,9 3,1 B4 5,8 6,0 C4 59 - 61 A5 2,8 3,2 B5 8 + 3 deformation ribs C5 8,0 - 8,05 A6 6,3 6,7 B6 10,0 10,5 C6 11 min A7 W 22 x 1,155 LH B7 1,0 1,2 C7 1,2 1,4 A8 28,3 28,7 The seal material is polyamidea. C8 9 min A9 11,8