1、Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/09/2008 02:26, Uncontrolled Copy, (c) BSIg49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58b
2、uildings Guidelines for inspection of air-conditioning systemsICS 91.140.30Ventilation for buildings Energy performance of BRITISH STANDARDBS EN 15240:2007BS EN 15240:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/09/2008 02:26, Uncontrolled Copy, (c) BSIThis British Standard was publ
3、ished under the authority of the Standards Policy and Strategy Committee on 31 July 2008 BSI 2008ISBN 978 0 580 55016 4Amendments/corrigenda issued since publicationDate CommentsRHE/2, Ventilation for buildings, heating and hot water services.A list of organizations represented on this committee can
4、 be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard
5、is the UK implementation of EN 15240:2008.With respect to the Energy Performance of Buildings Directive (EPBD) requirements, attention is drawn to the text of the fourth paragraph of the EN foreword. This recognizes at the present time that, if there is a conflict, existing national regulations take
6、 precedence over any requirements set out in this standard.The UK participation in its preparation was entrusted to Technical Committee EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15240April 2007ICS 91.140.30English VersionVentilation for buildings - Energy performance of buildings -Guidelines
7、 for inspection of air-conditioning systemsVentilation des btiments - Performance nergtique desbtiments - Lignes directrices pour linspection dessystmes de climatisationLftung von Gebuden - Gesamtenergieeffizienz vonGebuden - Leitlinien fr die Inspektion von KlimaanlagenThis European Standard was ap
8、proved by CEN on 26 March 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationals
9、tandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified
10、 to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Ne
11、therlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation
12、in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15240:2007: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/09/2008 02:26, Uncontrolled Copy, (c) BSIEN 15240:2007 (E) 2 Contents Page Foreword. 3 Introduction 4 1 Scope 5 2 Normative references . 5 3 Term
13、s and definitions. 5 4 Inspection procedure 6 4.1 General. 6 4.2 Pre-inspection and document collection 7 4.2.1 Documents. 7 4.2.2 Building and system survey 8 4.2.3 Advice in case of outdated, incomplete or missing documentation . 8 4.3 Methodology 8 4.3.1 General. 8 4.3.2 Inspection of the refrige
14、ration equipment 9 4.3.3 Inspection of pumps and chilled water pipe work. 9 4.3.4 Inspection of effectiveness of outdoor heat rejection 9 4.3.5 Inspection of the effectiveness of heat exchange to the refrigeration system (indoor units of split and distributed systems) .9 4.3.6 Inspection of air deli
15、very systems in treated spaces 9 4.3.7 Inspection of air delivery systems at air handling units and the associated ductwork 10 4.3.8 Inspection of air inlets to the system 10 4.3.9 Inspection of the building system controls and control parameters 10 4.3.10 Metering . 10 4.4 Reporting . 11 5 Advice o
16、n alternative solutions and improvements 11 Annex A (informative) Examples for the indication of subsystems of air conditioning systems 12 A.1 General. 12 A.2 Indication for subsystems 12 A.3 Examples for classification of complete air conditioning systems. 13 Annex B (informative) Examples of inspe
17、ction classes of air conditioning systems. 14 Annex C (informative) Features affecting the frequency and duration of inspection . 15 Annex D (informative) Checklist of preinspection information . 16 Annex E (informative) Recommendations for the extent of the inspection . 17 E.1 General. 17 E.2 List
18、of items for inspection in each class (C, B, A) . 17 Annex F (informative) Examples of checklists indicating observations and appropriate actions or advice. 24 Annex G (informative) Inspection report, example of contents. 30 Annex H (informative) Energy impacts of air conditioning, justification of
19、inspection and improvements 32 H.1 General. 32 H.2 Reduce cooling needs of the building 32 H.3 Improve the system efficiency. 33 Bibliography . 36 BS EN 15240:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/09/2008 02:26, Uncontrolled Copy, (c) BSIEN 15240:2007 (E) 3 Foreword This docu
20、ment (EN 15240:2007) has been prepared by Technical Committee CEN/TC 156 “Ventilation for buildings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Octob
21、er 2007, and conflicting national standards shall be withdrawn at the latest by October 2007. This standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/343), and supports essential requirements of EU Directive 2002/91/E
22、C on the energy performance of buildings (EPBD). It forms part of a series of standards aimed at European harmonisation of the methodology for the calculation of the energy performance of buildings. An overview of the whole set of standards is given in CEN/TR 15615, Explanation of the general relati
23、onship between various CEN standards and the Energy Performance of Buildings Directive (EPBD) (“Umbrella document“). Attention is drawn to the need for observance of the relevant EU Directives transposed into national legal requirements. Existing national regulations with or without reference to nat
24、ional standards, may restrict for the time being the implementation of the European Standards mentioned in this report. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium,
25、Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 15240:2007Licensed Co
26、py: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/09/2008 02:26, Uncontrolled Copy, (c) BSIEN 15240:2007 (E) 4 Introduction Article 9 of the Energy Performance of Buildings Directive (abbreviated as EPBD) requires the introduction of “measures to establish a regular inspection of air conditioning syste
27、ms of an effective rated output of more than 12 kW”. The inspection is to include “an assessment of the air conditioning efficiency and the sizing compared to the cooling requirements of the building”. Advice is also to be provided to the users on “possible improvement or replacement of the air-cond
28、itioning system and on alternative solutions”. Therefore, it is not the intention to have a full audit of the air conditioning system but a correct assessment of its functioning and main impacts on energy consumption, and as a result determine any recommendations on improvement. The target groups of
29、 this standard are national regulators as well as the building services sector including professional building owners, and persons and organisations responsible for inspections. Article 2 of the EPBD defines an “air conditioning system” as “a combination of all components required to provide a form
30、of air treatment in which temperature is controlled or can be lowered, possibly in combination with the control of ventilation, humidity and air cleanliness.” The inspection described here is therefore intended to include all types of comfort cooling and air conditioning systems that provide a total
31、 cooling output for the building above the specified 12 kW which is in turn taken to mean the rated cooling capacity of the included air conditioning systems. The total cooling output of 12 kW is associated to a building or a zone of a building according to national regulations. The term “air condit
32、ioning system” is used to represent any of the systems described below, which may heat and cool, and includes the associated water and air distribution and exhaust systems that form a necessary part of the system. It also includes the controls that are intended to regulate the use of these systems.
33、It excludes mechanical ventilation systems that provide no mechanical cooling and components that, although they may be co-located in air conditioning systems, are dedicated to providing heating duty only. EN 15239 gives details for inspection of ventilation systems, and of the associated air distri
34、bution and exhaust systems and thus provides complementary information to this standard. prEN 15378 specifies procedures and methods for the inspection of boilers and heating systems, according to Article 8 of the EPBD. The possibility to introduce classes is given in this standard in order to leave
35、 Member States freedom to choose between different objectives and extent of inspection, within a harmonised framework. Air conditioning systems can be described according to the list of systems and subsystems presented in Annex A. Inspection classes can also be specified on national level. Examples
36、of inspection classes are introduced in Annex B. BS EN 15240:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/09/2008 02:26, Uncontrolled Copy, (c) BSIEN 15240:2007 (E) 5 1 Scope This European Standard describes the common methodology for inspection of air conditioning systems in buildi
37、ngs for space cooling and or heating from an energy consumption standpoint. The inspection can consider for instance the following points to assess the energy performance and proper sizing of the system: System conformity to the original and subsequent design modifications, actual requirements and t
38、he present state of the building. Correct system functioning. Function and settings of various controls. Function and fitting of the various components. Power input and the resulting energy output. It is not intended that a full audit of the air conditioning system is carried out, but a correct asse
39、ssment of its functioning and main impacts on energy consumption, and as a result determine any recommendations on improvement of the system or use of alternative solutions. National regulations and guidelines targeting energy efficiency and in line with the main objectives of this standard are also
40、 applicable. NOTE Provision of adequate ventilation and system balancing are dealt with in EN 15239. The qualification of the persons or organisation responsible for inspections is not covered by this standard, but the requirements for inspections are covered. The frequency of the mandatory inspecti
41、on is defined on national level. Features affecting the frequency and duration of inspection are introduced in Annex C. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated
42、references, the latest edition of the referenced document (including any amendments) applies. EN 12792:2003, Ventilation for buildings Symbols, terminology and graphical symbols EN 14511-1:2004, Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space
43、heating and cooling Part 1: Terms and definitions 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12792:2003 and EN 14511-1:2004 and the following apply. 3.1 air conditioning system combination of all components required to provide a form of air treat
44、ment in which temperature is controlled, possibly in combination with the control of ventilation, humidity and air cleanliness BS EN 15240:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/09/2008 02:26, Uncontrolled Copy, (c) BSIEN 15240:2007 (E) 6 3.2 inspection inspection, in the mann
45、er of this standard means to examine the air conditioning systems in buildings 3.3 air conditioning system control measures taken in ensuring the system operates in accordance with the design criteria NOTE It may be a part of the building system control 3.4 commissioning sequence of events that ensu
46、re the building and its associated heating, ventilation and air conditioning systems are functioning in accordance with the design parameters 3.5 design criteria set of descriptions based on particular environmental elements such as indoor air quality, thermal and acoustical comfort, energy efficien
47、cy and the associated system controls to be used for assessing the plant operation 3.6 control parameters set values of the internal environmental conditions 3.7 design documentation written descriptions of the essential design elements of the plant 3.8 cooling energy distribution system (abbreviate
48、d CED-system) subsystem, where the cooling energy is transported and distributed from the CES-system to CEE-system by a distribution medium, inclusive control systems (examples for the distribution medium are air, water, refrigeration fluid) 3.9 cooling energy emission system (abbreviated CEE-system
49、) subsystem, where the cooling energy is emitted to the space (for example air outlets, fan coils, chilled ceiling, surface cooling) inclusive control systems 3.10 cooling energy generation system (abbreviated CEG-system) subsystem, where the cooling energy is generated by refrigeration units (examples are chillers, absorber unit, heat pumps) inclusive control systems 3.11 energy supply system (abbreviated ES-system) system supplying the necessary energy to generate the CEG-system (examples are electricity, gas, solar) inclusive control systems 4 Inspecti
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1