BS EN 15380-1-2006 Railway applications - Designation system for railway vehicles - Part 1 General principles《轨道交通 铁路车辆用命名系统 一般原则》.pdf

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Part 1: General principlesThe European Standard EN 15380-1:2006 has the status of a British Standar

2、dICS 01.110; 45.060.01Railway applications Designation system for railway vehicles BRITISH STANDARDBS EN15380-1:2006BS EN 15380-1:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2006 BSI 2006ISBN 0 580 48942 6This standard has b

3、een produced from Part 1 of the DIN 25002 series of standards under the CEN fast-track procedure. The UK voted against the document in both associated ballots stating that the translation of the documents from German to prepare the English version had resulted in a lack of clarity as to the intent a

4、nd meaning of some of the terminology used. There is a concern that some of the railway-related terminology used does not correspond to UK usage. Therefore, this standard should be applied with care and consideration in order to avoid misunderstanding.Cross-referencesThe British Standards which impl

5、ement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication doe

6、s not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN ti

7、tle page, pages 2 to 22, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsA list of organizations represented on this committee can be obtained on request to

8、its secretary. present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.National forewordThis British Standard is the

9、 official English language version of EN 15380-1:2006. The UK participation in its preparation was entrusted to Technical Committee RAE/1, Railway applications, which has the responsibility to: aid enquirers to understand the text;EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15380-1April 2006IC

10、S 01.110; 45.060.01English VersionRailway applications - Designation system for railway vehicles -Part 1: General principlesApplications ferroviaires - Systme de classification pourvhicules ferroviaires - Partie 1: Rgles gnralesBahnanwendungen - Kennzeichnungssystematik frSchienenfahrzeuge - Teil 1:

11、 GrundlagenThis European Standard was approved by CEN on 6 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographic

12、al references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN memb

13、er into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan

14、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN Al

15、l rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15380-1:2006: EEN 15380-1:2006 (E) 2 Contents Page Foreword4 1 Scope 5 2 Normative references 6 3 Terms and definitions .7 4 General principles of the designation system8 4.1 General8 4.2 Str

16、ucturing of the designation .8 5 Rules for the structure of designation sets 9 6 Structure and content of the designation sets .9 6.1 General9 6.2 Function aspect .9 6.2.1 “Function-oriented structure“ designation set.9 6.3 Product aspect.10 6.3.1 “Product“ designation set 10 6.3.2 “Object“ designat

17、ion set.11 6.4 Location aspect12 6.4.1 “Installation site“ designation set12 6.4.2 “Location“ designation set.13 6.5 “Document type“ designation set14 7 Application of designations15 7.1 Combination of designation sets.15 7.2 Format of the designations.16 7.2.1 Format in the technical documents .16

18、7.2.2 Format in the installation 16 Annex A (informative) Rolling stock fleet designation17 Annex B (informative) Examples of designation formats .18 Annex C (informative) Relationships between the different aspects.20 Bibliography 22 List of Tables Table C.1 Product life cycle of the railway vehicl

19、e 21 List of Figures Figure 1 Structure and content of the “Function-oriented structure“ designation set . 10 Figure 2 Structure and content of the “Product“ designation set . 10 Figure 3 Structure and content of the “Object“ designation set 11 Figure 4 Structure and content of the “Installation sit

20、e“ designation set 12 EN 15380-1:2006 (E) 3 Figure 5 Structure and content of the “Location“ designation set.13 Figure 6 Structure and content of the “Document type“ designation set .14 Figure 7 Combination of different designation sets 15 Figure A.1 Example of “Railway vehicle“ installation complex

21、 designation.17 Figure A.2 Example of rolling stock fleet designation.17 Figure B.1 Document designation in the drawing title block18 Figure B.2 Document designation of circuit documentation, circuit diagrams in the drawing title block .18 Figure B.3 Document designation in the parts list title bloc

22、k.18 Figure B.4 Document designation of wiring tables and object lists in the title block.19 Figure B.5 Document designation of technical documents19 Figure C.1 Relationships between the relevant standards20 EN 15380-1:2006 (E) 4 Foreword This document (EN 15380-1:2006) has been prepared by Technica

23、l Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn a

24、t the latest by October 2006. At the request of DIN, this European Standard has been submitted to the PQ procedure and has been approved as there have been no comparable standards in Europe to date. The EN 15380 series of standards, Railway applications Designation system for railway vehicles consis

25、ts of: Part 1: General principles Part 2: Product groups Part 3: Designation of installation sites and locations This European Standard is based on Part 1 of the DIN 25002 series of standards. After approval, the text of DIN 25002-1 submitted to the PQ procedure was brought into line with the formal

26、 requirements of an EN. The resulting editorial amendments have led to slightly modified wordings but they have no effect on the technical content of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to impleme

27、nt this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the Unit

28、ed Kingdom. EN 15380-1:2006 (E) 5 Introduction This European Standard has created a uniform, general facility for classifying railway vehicles suitable for all project viewpoints. The following aspects are used as project viewpoints: function viewpoint and/or product viewpoint and/or location viewpo

29、int. This standard forms the basis for: definitions of requirements, tenders, contracts, specifications; creation of standard sub-systems; design (requirements, specifications); demarcation of areas of responsibility; product planning support; project planning support; comparison of different system

30、 solutions; maintenance and repair specifications; reliability studies, data acquisition; allocation of equipment to functions; designation of functions, products and locations . 1 Scope As a railway-specific technical standard, this European Standard specifies the designation system for technical p

31、roducts and technical project documentation. It takes into account the general rules for structuring principles according to EN 61346-1 and designations according to EN 61355. The European Standard specifies the structure and content of the designation sets required in the technical project document

32、ation. The designation depends on the aspect used, see Annex C, individually or in designation set combinations, i.e.: product groups according to EN 15380-2; installation site/location according to EN 15380-3; function structure according to DIN 25002-5. EN 15380-1:2006 (E) 6 2 Normative references

33、 The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15380-2, Railway applications Design

34、ation system for railway vehicles Part 2: Product groups EN 15380-3:2006, Railway applications Designation system for railway vehicles Part 3: Designation of installation sites and locations EN 61082-1, Preparation of documents used in electrotechnology Part 1: General requirements Amendment A2 (IEC

35、 61082-1:1991) EN 61346-1, Industrial systems, installations and equipment and industrial products Structuring principles and reference designations - Part 1: Basic rules (IEC 61346-1:1996) EN 61346-2:2000, Industrial systems, installations and equipment and industrial products - Structuring princip

36、les and reference designations Part 2: Classification of objects and codes for classes (IEC 61346-2:2000) EN 61355, Classification and designation of documents for plants, systems and equipment (IEC 61355:1997) ISO/IEC 8859-1, Information technology 8-bit single-byte coded graphic character sets Par

37、t 1: Latin alphabet No. 1 DIN 25002-3:2001, Railway applications Designation system for rail vehicles - Part 3: Classification of documents1) DIN 25002-5, Railway applications Designation system for rail vehicles Part 5: Function groups1) 1) Available from: Beuth Verlag GmbH, D-10772 Berlin EN 15380

38、-1:2006 (E) 7 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 61346-2:2000 and the following apply. 3.1 subclass part of a class in a designation set; combination of data positions in the designation hierarchy EN 61346-2:2000 3.2 installation combinat

39、ion of technical devices; installations can be divided into subinstallations 3.3 installation complex consists of several equivalent installations or installations working together NOTE For the purposes of this standard, this always means the complete railway vehicle ready for operation 3.4 installa

40、tion site topographic position of vehicle units, structural units and combined assemblies in a closed train composition 3.5 object smallest entity treated that is designated in a technical product that fulfils a task (e.g. lifting, lowering, measuring, controlling) together with other products. For

41、the purposes of this standard, this does not mean tools, clamp meters, machine tools or inventory, for example 3.6 data position position for writing down an alphabetical, numerical or special character 3.7 location information on the spatial position of an object, of a structural unit, of a technic

42、al device in a combination group, e.g. axle, drivers desk 3.8 functional assignment for railway vehicles linking of related functions between the installation complexes of a rail transport system 3.9 common assignment for railway vehicles combination of all installation complexes to form one rail tr

43、ansport system 3.10 class part of a designation set; combination of subclasses in the designation hierarchy 3.11 classification character subdivides classes for better comprehension EN 15380-1:2006 (E) 8 3.12 code letter an alphabetical character (Latin upper case letters excluding I and O) used for

44、 classification 3.13 designation designation set or combination of several designation sets used for the coded representation of designation tasks and certain information 3.14 designation set a classified combination of correlated information 3.15 railway vehicle track-bound vehicle guided and borne

45、 on rails NOTE Trolley buses are regarded as railway vehicles. 3.16 rail transport system land-bound transport system for conveying passengers and goods between fixed locations with fixed, movable and logistical devices (see common assignment) 3.17 technical device structural and/or functional combi

46、nation of objects for fulfilling a technical task 3.18 subinstallation part of an installation 3.19 prefix sign identifies (names) the smallest designated entity treated 4 General principles of the designation system 4.1 General The basic principles for the designation of functions, products and loc

47、ations shall be taken into account according to EN 61346-1. 4.2 Structuring of the designation These designations are structured according to the following criteria: function-oriented structure (=); product-oriented structure (-); location-oriented structure (+). The structures have equal status and

48、 are independent of each other. The designation corresponds to the task set. The designation can be used singly or in a combination. However, it is not necessary always to use all possible designations. EN 15380-1:2006 (E) 9 The prefix sign “ a new draft is in preparation. The structure is shown in

49、Figure 1. EN 15380-1:2006 (E) 10 Key 1 Prefix sign 2 Main function group according to DIN 25002-5 3 Part function group according to DIN 25002-5 4 Sub-function group according to DIN 25002-5 Figure 1 Structure and content of the “Function-oriented structure“ designation set 6.3 Product aspect 6.3.1 “Product“ designation set This designation set is used to designate complex products and technical devices