1、BRITISH STANDARDBS EN 15498:2008Precast concrete products Wood-chip concrete shuttering blocks Product properties and performanceICS 91.100.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g
2、60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 15498:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 May 2008 BSI 2008ISBN 978 0 580 56734 6National forewordThis British Standard is the UK implementation of EN 15498:2008.The UK partic
3、ipation in its preparation was entrusted to Technical Committee B/524, Precast concrete products.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are respon
4、sible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publicationDate CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15498April 2008ICS 91.100.30English VersionPrecast concrete products - Wood
5、-chip concrete shutteringblocks - Product properties and performanceProduits prfabriqus en bton - Blocs de coffrage enbton utilisant des copeaux de bois comme granulat -Proprits et performances des produitsBetonfertigteile - Holzspanbeton-Schalungssteine -Produkteigenschaften und LeistungsmerkmaleTh
6、is European Standard was approved by CEN on 18 March 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical reference
7、s concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into it
8、s own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu
9、ania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN
10、All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15498:2008: EEN 15498:2008 (E) 2 Contents Page Foreword5 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols and abbreviations .7 3.1 Terms and definitions .7 3.2 Symbols and a
11、bbreviations 8 4 Requirements.11 4.1 Material requirements .11 4.1.1 Wood-chip concrete 11 4.1.2 Supplementary thermal insulation materials11 4.2 Finished product requirements11 4.2.1 Geometric characteristics.11 4.2.2 Density 12 4.2.3 Moisture movement.12 4.2.4 Reaction to fire.12 4.2.5 Water vapou
12、r permeability13 4.2.6 Mechanical strength 13 4.2.7 Acoustic properties .13 4.2.8 Thermal properties 14 4.2.9 Durability 14 5.1 Principle15 5.2 Procedure .15 5.2.1 Geometric characteristics.15 5.2.2 Density 16 5.2.3 Moisture movement.16 5.2.4 Reaction to fire.16 5.2.5 Water vapour permeability16 5.2
13、.6 Mechanical strength 16 5.2.7 Acoustic properties .17 5.2.8 Thermal properties 17 5.2.9 Durability 18 6.1 General18 6.2 Demonstration of conformity .18 6.3 Assessment of conformity18 6.4 Initial type testing 19 6.5 Factory production control.19 6.5.1 General19 6.5.2 Equipment 20 6.5.3 Materials .2
14、0 6.5.4 Production process .20 6.5.5 Product testing.20 6.5.6 Stock control20 7 Marking and labelling 20 7.1 Marking and labelling on product 20 7.2 Marking and labelling on delivery documentation.21 Annex A (normative) Filling pressure of concrete infill 22 Annex B (normative) Determination of tens
15、ile strength of web.24 B.1 Principle24 BS EN 15498:2008EN 15498:2008 (E) 3 B.2 Apparatus.24 B.3 Procedure.25 B.4 Determination of tensile strength28 B.4.1 Principle .28 B.4.2 Calculation of the minimum required tensile strength of the web.29 B.4.3 Measurement of the web tensile failure load and calc
16、ulation of the tensile strength of webs29 B.5 Test report30 Annex C (normative) Determination of flexural strength of shells31 C.1 Principle .31 C.2 Apparatus.31 C.3 Procedure.31 C.4 Determining the flexural strength of shells 32 C.4.1 General .32 C.4.2 Calculation of the minimum required flexural s
17、trength of shells.33 C.4.3 Measurement of the flexural failure load and calculation of the flexural strength of shells.34 C.5 Test report35 Annex D (normative) Test methods for determination of specific heat capacity.36 D.1 Principle .36 D.2 Test device .36 D.3 Specimen36 D.4 Procedure.36 D.4.1 Core
18、 temperature measurement 36 D.4.2 Core temperature calculation.37 D.4.3 Comparison of measured and calculated core temperature 38 D.5 Determination of specific heat capacity38 D.6 Test report38 D.7 VBA-Routine for calculation of core temperature (informative).38 Annex E (normative) Sampling for init
19、ial type testing 40 E.1 General .40 E.2 Sampling procedure40 E.2.1 Random sampling .40 E.2.2 Representative sampling40 E.2.3 Dividing the sample.41 E.2.4 Number of shuttering blocks required for testing .42 E.3 Place and dates of inspection and acceptance testing.42 Annex F (normative) Compliance cr
20、iteria for initial type testing and for independent testing of consignment 43 Annex G (informative) Example of an inspection scheme44 G.1 Equipment inspection.44 G.1.1 Testing and measuring equipment44 G.1.2 Storage and production equipment.44 G.2 Materials inspection45 G.2.1 All materials .45 G.2.2
21、 Materials not submitted to an assessment of conformity before delivery 2)45 G.3 Production process inspection46 G.4 Product inspection46 G.4.1 Product testing 46 G.4.2 Marking, storage, delivery 46 G.5 Switching rules 47 G.5.1 Normal inspection .47 G.5.2 Normal to reduced inspection47 G.5.3 Reduced
22、 to normal inspection.47 G.5.4 Tightened inspection 47 G.5.5 Tightened to normal inspection.47 G.5.6 Stopped production 47 BS EN 15498:2008EN 15498:2008 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive Constructions products 48 Z
23、A.1 Scope and relevant characteristics .48 ZA.2 Procedure(s) for attestation of conformity of wood-chipconcrete shuttering blocks49 ZA.2.1 System(s) of attestation of conformity49 ZA.2.2 EC Certificate and Declaration of conformity.50 ZA.3 CE marking and labelling51 Bibliography 53 BS EN 15498:2008E
24、N 15498:2008 (E) 5 Foreword This document (EN 15498:2008) has been prepared by Technical Committee CEN/TC 229 “Precast concrete products”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or
25、 by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible
26、for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Construction Products Directive (89/106/EEC). For relationship with EU Directive(s
27、), see informative Annex ZA, which is an integral part of this document. It also takes into account the EN 13369:2004 Common rules for precast concrete products. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement
28、this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and t
29、he United Kingdom. BS EN 15498:2008EN 15498:2008 (E) 6 1 Scope This European Standard specifies the properties, performance and test methods of factory made, non-load-bearing hollow wood-chip concrete shuttering blocks, which may include factory installed thermal insulation. These blocks are intende
30、d to be used for external and internal walls and partitions when filled with concrete. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of
31、 the referenced document (including any amendments) applies. EN 772-14, Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units EN 772-16, Methods of test for masonry units - Part 16: Determination of dimensions EN 77
32、2-20, Methods of test for masonry units - Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units EN 1607, Thermal insulating products for building applications Determination of tensile strength perpendicular to faces EN 1793-1, Road traf
33、fic noise reducing devices Test method for determining the acoustic performance Part 1 : Intrinsic characteristics of sound absorption EN 1793-2, Road traffic noise reducing devices Test method for determining the acoustic performance Part 2 : Intrinsic characteristics of airborne sound insulation E
34、N 1934, Thermal performance of buildings Determination of thermal resistance by hot box method using heat flow meter Masonry EN 12524, Building materials and products Hygrothermal properties Tabulated design values EN 12664, Thermal performance of building materials and products Determination of the
35、rmal resistance by means of guarded hot plate and heat flow meter methods Dry and moist products of medium and low thermal resistance EN 12390-5, Testing hardened concrete Part 5 : Flexural strength of test specimens EN 13162, Thermal insulation products for buildings - Factory made mineral wool (MW
36、) products - Specification EN 13163, Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification EN 13164, Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification EN 13165, Thermal insula
37、tion products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification EN 13166, Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification BS EN 15498:2008EN 15498:2008 (E) 7 EN 13167, Thermal insulation products for buildings
38、- Factory made cellular glass (CG) products - Specification EN 13168, Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification EN 13169, Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification EN 13170, Therm
39、al insulation products for buildings - Factory made products of expanded cork (ICB) - Specification EN 13171, Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification EN 13238, Reaction to fire tests for building products Conditioning procedures and general r
40、ules for selection of substrates EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests EN 14474, Precast concrete products Concrete with wood-chips as aggregate Requirements and test methods EN ISO 140-3, Acoust
41、ics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995) EN ISO 354, Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) EN ISO 6946, Building compon
42、ents and building elements - Thermal resistance and thermal transmittance - Calculation method (ISO 6946:2007) EN ISO 10456, Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007) EN ISO 12
43、572, Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001) 3 Terms, definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 shut
44、tering block hollow block, having outer shells connected by recessed webs, intended to be dry-stacked or laid with mortar and filled with concrete 3.1.2 wood-chip concrete shuttering block shuttering block made of wood-chip concrete according to EN 14474 BS EN 15498:2008EN 15498:2008 (E) 8 Figure 1
45、Examples of shuttering blocks without additional thermal insulation 3.1.3 shuttering block with supplementary thermal insulation shuttering block with factory installed thermal insulation to enhance thermal resistance Figure 2 Examples of shuttering blocks with supplementary thermal insulation 3.1.4
46、 ancillary block specially shaped shuttering block for the execution of constructional details, such as corners, reveals, lintels, etc. 3.1.5 design (nominal) dimension dimension targeted in the project documentation 3.1.6 actual dimension (of the product) dimension found by measurement (on the fini
47、shed product) 3.2 Symbols and abbreviations lblength of shuttering block, in mm tbwidth (thickness) of shuttering block, in mm tcthickness of concrete infill, in mm tithickness of insulation, in mm twi, (w1, w2, )thickness of web, in mm tSthickness of shell, in mm BS EN 15498:2008EN 15498:2008 (E) 9
48、 tS1thickness of outer shell, in mm tS2thickness of inner shell, in mm a1, a2length of hollow space, in mm a3length of cantilever shell, in mm hbheight of shuttering block, in mm hRheight of web recess (hR= hR1+ hR2), in mm hwheight of recessed web (hw= hb hR), in mm wRwidth of web recess, in mm s c
49、ross-sectional area of recessed webs (s = twi* hw), in mm s1cross-sectional area of recessed web with thickness tw1(s1= tw1* hw), in mm ARtotal web recess area (AR= AR1+ AR2), in mm AR1upper web recess area, in mm AR2lower web recess area, in mm l supporting length of shell (l = a + 2 * tw1/2), in mm p filling pressure, in N/mm pmaxmaximum filling pressure of concrete infill, in N/mm pmsdmeasured maximum filling pressure, in N/mm Ptweb tensile failure load, in N Pt,minminimum required web tensile failure load, in N Pt,msdmeasu
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1