BS EN 15534-1-2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Test methods f.pdf

1、BSI Standards PublicationBS EN 15534-1:2014Composites made fromcellulose-based materials andthermoplastics (usually calledwood-polymer composites(WPC) or natural fibrecomposites (NFC)Part 1: Test methods for characterisation ofcompounds and productsBS EN 15534-1:2014 BRITISH STANDARDNational forewor

2、dThis British Standard is the UK implementation of EN 15534-1:2014.It supersedes DD CEN/TS 15534-1:2007 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/42, Fibre reinforced thermosetting plastics andprepregs.A list of organizations represented on th

3、is committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 79503 9ICS 79

4、.080; 83.080.01; 83.140.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2014.Amendments issued since publicationDate Text affectedBS EN 15534-1:2014EURO

5、PEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15534-1 January 2014 ICS 79.080; 83.080.01; 83.140.99 Supersedes CEN/TS 15534-1:2007English Version Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC) - Par

6、t 1: Test methods for characterisation of compounds and products Composites base de matires cellulosiques et de thermoplastiques (communment appels composites bois-polymres (WPC) ou composites fibres dorigine naturelle (NFC) - Partie 1: Mthodes dessai pour la caractrisation des compositions et des p

7、roduits Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (blicherweise Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) -Teil 1: Prfverfahren zur Beschreibung von Compounds und Erzeugnissen This European Standard was approved by CEN on 9 November 201

8、3. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained o

9、n application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENE

10、LEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ital

11、y, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Aven

12、ue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15534-1:2014 EBS EN 15534-1:2014EN 15534-1:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and defini

13、tions .8 4 Test specimens 9 5 Conditioning of test specimens .9 5.1 General 9 5.2 Reference conditioning .9 5.3 Conditioning for factory production control and testing under other conditions . 10 5.4 Conditioning for tests performed by third-parties 10 6 Physical properties . 10 6.1 Appearance (appl

14、icable to products) . 10 6.2 Density . 10 6.3 Moisture content . 10 6.4 Slipperiness . 11 6.4.1 General . 11 6.4.2 Pendulum test . 11 6.4.3 Inclination plan test 11 6.4.4 Dynamic coefficient of friction 12 6.5 Linear mass (applicable to profiles) . 12 6.5.1 Apparatus 12 6.5.2 Test specimens . 12 6.5

15、.3 Procedure 13 6.5.4 Calculation and expression of results 13 6.6 Dimensional characteristics 13 6.6.1 Conditioning 13 6.6.2 Thickness, width and length (applicable to profiles, only). 13 6.6.3 Deviation from straightness (applicable to profiles, only) . 13 6.6.4 Cupping . 14 7 Mechanical propertie

16、s 14 7.1 Impact resistance 14 7.1.1 Impact resistance (applicable to compounds) 14 7.1.2 Falling mass impact resistance (applicable to products). 15 7.1.3 Extreme temperatures 18 7.2 Tensile properties (applicable to compounds) 18 7.3 Flexural properties 18 7.3.1 Flexural properties (applicable to c

17、ompounds) 18 7.3.2 Flexural properties (applicable to non-load bearing products) . 18 7.4 Creep behaviour (applicable to finished products for non-load bearing applications) 19 7.4.1 Known span in use . 19 7.4.2 Unknown span in use . 20 7.5 Resistance to indentation 21 7.5.1 Principle . 21 7.5.2 App

18、aratus 21 7.5.3 Test specimens . 21 BS EN 15534-1:2014EN 15534-1:2014 (E) 3 7.5.4 Test method . 21 7.6 Nail and screw withdrawal 22 7.7 Pull through resistance . 22 8 Durability 23 8.1 Resistance to artificial weathering 23 8.1.1 Test methods for artificial weathering 23 8.1.2 Methods for assessing

19、of the resistance to artificial weathering 23 8.2 Resistance to natural ageing (external use) . 23 8.2.1 Test methods for natural ageing 23 8.2.2 Methods for assessing the resistance to natural ageing 24 8.3 Moisture resistance . 24 8.3.1 Swelling and water absorption 24 8.3.2 Moisture resistance un

20、der cyclic conditions . 26 8.3.3 Moisture resistance Boiling test . 27 8.4 Resistance against termites . 27 8.5 Resistance against biological agents . 28 8.5.1 Pre-treatment . 28 8.5.2 Resistance against basidiomycetes 28 8.5.3 Resistance against soft rotting micro-fungi . 31 8.5.4 Resistance agains

21、t discolouring micro-fungi according to ASTM D 3273 32 8.5.5 Resistance against discolouring micro-fungi according to ISO 16869 . 34 8.5.6 Resistance against discolouring algae . 35 8.6 Resistance to salt spray . 35 9 Thermal properties 36 9.1 Heat deflection temperature (HDT) 36 9.2 Linear thermal

22、expansion . 36 9.3 Heat reversion 36 9.4 Heat build-up (applicable to products) 36 9.4.1 Principle 36 9.4.2 Apparatus . 36 9.4.3 Test specimens 37 9.4.4 Procedure . 37 9.4.5 Expression of results 38 9.4.6 Test report 39 9.5 Oxygen index (OI) 39 9.6 Reaction to fire 39 9.6.1 Single flame source test

23、. 39 9.6.2 Single burning item (SBI) test (applicable to cladding only) 39 9.6.3 Radiant heat source test (floorings) 46 10 Other properties 46 10.1 Degree of chalking (applicable to coated products, only) 46 10.2 Change of gloss . 46 10.3 Peel strength (applicable to profiles with laminated foil) 4

24、6 10.3.1 Principle 46 10.3.2 Apparatus . 47 10.3.3 Preparation of test pieces. 47 10.3.4 Conditioning 48 10.3.5 Procedure . 48 10.3.6 Test report 48 Annex A (normative) Determination of the modulus of elasticity in bending and bending strength of profiles . 50 Bibliography 57 BS EN 15534-1:2014EN 15

25、534-1:2014 (E) 4 Foreword This document (EN 15534-1:2014) has been prepared by Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at

26、 the latest by July 2014, and conflicting national standards shall be withdrawn at the latest by July 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or al

27、l such patent rights. This document supersedes CEN/TS 15534-1:2007. The significant changes that have been made since the previous edition are the following: change of the status from Technical Specification to European Standard; complete technical review of the test methods. EN 15534 consists of th

28、e following parts: EN 15534-1, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC) Part 1: Test methods for characterization of compounds and products prEN 15534-2, Composites made from cellulose-based mate

29、rials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC) Part 2: Characterization of compounds1) EN 15534-4, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NF

30、C) Part 4: Specifications for decking profiles and tiles EN 15534-5, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC) Part 5: Specifications for cladding profiles and tiles prEN 15534-6, Composites made

31、from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC) Part 6: Specifications for fencing profiles and systems1) prEN 15534-7, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer com

32、posites (WPC) or natural fibre composites (NFC) Part 7: Specifications for general purpose profiles in external applications1)According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Bel

33、gium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switz

34、erland, Turkey and the United Kingdom. 1) In preparation. BS EN 15534-1:2014EN 15534-1:2014 (E) 5 Introduction The denomination “wood-polymer composites”, WPC, is usually used to designate materials or products consisting of one or more natural fibres or flours and one or a mixture of polymer(s). Na

35、tural fibres and flours come from different plant sources (e.g. wood, hemp, flax, sisal, coconut, cotton, kenaf, jute, abaca, banana leaf fibres, bamboo, rice, wheat straw or other fibrous material) and different polymers, virgin or recycled, are used. Currently, the most commonly used polymers are

36、poly(vinyl chloride) (PVC), polypropylene (PP) and polyethylene (PE). WPC materials can be processed by different techniques, as extrusion for profiles, calendering for films and sheets, injection moulding or compression moulding. The contents of natural fibres and polymers depend on the application

37、 and the processing techniques. WPC materials may be considered neither as filled plastics nor as a special kind of wood. They should be considered as different materials having their own characteristics. For the moment, the main applications of WPC products are decking, cladding, panelling and fenc

38、ing and furniture. BS EN 15534-1:2014EN 15534-1:2014 (E) 6 1 Scope This European Standard specifies test methods for the determination of properties of composites made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC). N

39、OTE For editorial reasons, in EN 15534 the abbreviation “WPC” is used for “composites made from cellulose-based materials and thermoplastics”. This part of EN 15534 is applicable to cellular or non-cellular compounds and products, made from cellulose-based materials and thermoplastics, intended to b

40、e or being processed through plastics processing techniques, without threshold for the cellulose-based material content. All the properties listed in this part of EN 15534 are not necessarily assessed for a given application. Test parameters and requirements of the test methods for a given applicati

41、on are specified in the relevant part of EN 15534. Profiles for the management of electrical power cables, communication cables and power track systems used for the distribution of electrical power, profiles for windows or doors and profiles for guttering are not covered by EN 155342). 2 Normative r

42、eferences The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applie

43、s. EN 84:1997, Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure EN 117:2012, Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) EN 152:2011, Wood preservatives - Determinati

44、on of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method EN 317, Particleboards and fibreboards - Determination of swelling in thickness after immersion in water EN 321:2001, Wood-based panels - Determination of moisture resistance unde

45、r cyclic test conditions EN 322:1993, Wood-based panels - Determination of moisture content EN 477:1995, Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by falling mass EN 479, Unplasticized polyvi

46、nylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of heat reversion EN 927-3, Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test 2) Profiles that are excluded are in the scopes of standards prepared by

47、CEN/TC 33, CENELEC/TC 213 or CEN/TC 128. BS EN 15534-1:2014EN 15534-1:2014 (E) 7 EN 927-6, Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water EN 1383, Timber structures - Tes

48、t methods - Pull through resistance of timber fasteners ENV 12038:2002, Durability of wood and wood-based products - Wood-based panels - Method of test for determining the resistance against wood-destroying basidiomycetes EN 13446, Wood-based panels - Determination of withdrawal capacity of fastener

49、s EN 13823, Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item EN 13893, Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces CEN/TS 15083-2:2005, Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi EN 16472, Plastics - Method for accelerated photoageing usin