1、BS EN 15715:2009ICS 13.220.50; 91.100.60NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDThermal insulationproducts Instructions formounting and fixingfor reaction to firetesting Factorymade productsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/05/201
2、0 03:15, Uncontrolled Copy, (c) BSIThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 59264 5Amendments/corrigenda issued since publicationDate CommentsBS EN 15715:2009National forewordThis British Standard
3、is the UK implementation of EN 15715:2009. The UK participation in its preparation was entrusted to TechnicalCommittee B/540, Energy performance of materials components andbuildings.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does
4、 not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/05/2010 03:15, Uncontrolled Copy, (c) BSIBS
5、EN 15715:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15715 November 2009 ICS 91.100.60 English Version Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products Produits isolants thermiques - Instructions de montage et de fix
6、ations pour lessai de raction au feu - Produits isolants thermiques manufacturs Wrmedmmstoffe - Einbau- und Befestigungsbedingungen fr die Prfung des Brandverhaltens - Werkmig hergestellte Wrmedmmstoffe This European Standard was approved by CEN on 29 September 2009. CEN members are bound to comply
7、with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management
8、 Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the of
9、ficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
10、Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for C
11、EN national Members. Ref. No. EN 15715:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/05/2010 03:15, Uncontrolled Copy, (c) BSIBS EN 15715:2009EN 15715:2009 (E) 2 Contents Page Foreword 5 1 Scope 9 2 Normative references 9 3 Terms, definitions and abbreviated terms 9 3.1 Terms and
12、definitions .9 3.2 Abbreviated terms used in this European Standard . 10 4 Principle . 10 5 Instructions for mounting and fixing of test specimens 11 5.1 General . 11 5.2 Product and installation parameters 11 5.3 Mounting and fixing 12 5.3.1 Ignitability, EN ISO 11925-2 Exposure to thermal attack 1
13、2 5.3.2 Single Burning Item (SBI), EN 13823 12 5.4 Validity of test results for product groups (Field of application) 18 6 Instructions for mounting and fixing of products in standardised assemblies simulating end-use application(s) 18 6.1 General . 18 6.2 Product and installation parameters 19 6.3
14、Mounting and fixing 20 6.3.1 Ignitability, EN ISO 11925-2 . 20 6.3.2 Single Burning Item (SBI) (EN 13823) . 20 6.4 Validity of test result for a product group (Field of application) . 25 Annex A (normative) Product specific details . 26 A.1 General . 26 A.2 Mineral wool (MW) 26 A.3 Expanded polystyr
15、ene (EPS) . 34 A.4 Extruded polystyrene foam (XPS) . 39 A.5 Polyurethane and polyisocyanurate (PUR/PIR) . 44 A.6 Phenolic Foam (PF) 50 A.7 Cellular Glass (CG) . 56 A.8 Wood Wool (WW) 63 A.9 Expanded perlite (EPB) 67 A.10 Expanded cork (ICB) 70 A.11 Wood fibre (WF) 73 A.12 Flexible elastomeric foam (
16、FEF) 76 A.13 Calcium silicate (CS) 82 Thickness . 84 Exposure to thermal attack . 85 Size and positioning of test specimen 85 Fixing of test specimen . 85 A.14 Polyethylene foam (PEF) 88 Bibliography . 94 Tables Table 1 Product parameters . 11 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 1
17、3/05/2010 03:15, Uncontrolled Copy, (c) BSIBS EN 15715:2009EN 15715:2009 (E) 3 Table 2 Installation parameters 12 Table 3 Thermal insulation product parameters in standardised assemblies 19 Table 4 Installation parameters of standardised assemblies 19 Table 5 Standard test configurations of standard
18、ised assemblies 21 Table A.1 Product parameters for MW flat products, when tested as placed on the market or in standard test configuration of assemblies . 26 Table A.2 Installation parameters for MW flat products, as placed on the market 29 Table A.3 Product parameters for MW pipe insulation produc
19、ts, as placed on the market . 30 Table A.4 Installation parameters for MW pipe insulation products, as placed on the market 31 Table A.5 Installation parameters for MW flat products in standard test configuration of assemblies, simulating end-use applications 32 Table A.6 Product parameters for EPS
20、flat products, when tested as placed on the market or in standard test configuration of assemblies . 34 Table A.7 Installation parameters for EPS flat products as placed on the market 35 Table A.8 Product parameters for EPS pipe insulation products, as placed on the market 36 Table A.9 Installation
21、parameters for EPS pipe insulation products, as placed on the market . 37 Table A.10 Installation parameters for EPS flat products in standard test configuration of assemblies, simulating end-use applications 38 Table A.11 Product parameters for XPS flat products when tested as placed on the market
22、or in standard test configuration of assemblies . 39 Table A.12 Installation parameters for XPS flat products as placed on the market . 40 Table A.13 Product parameters for XPS pipe insulation products, as placed on the market . 41 Table A.14 Installation parameters for XPS pipe insulation products,
23、 as placed on the market . 42 Table A.15 Installation parameters for XPS flat products in standard test configuration of assemblies, simulating end-use applications 43 Table A.16 Product parameters for PUR/PIR flat products when tested as placed on the market or in standard test configuration of ass
24、emblies. 44 Table A.17 Installation parameters for PUR/PIR flat products, as placed on the market 45 Table A.18 Product parameters for PUR/PIR pipe insulation products, as placed on the market . 46 Table A.19 Installation parameters for PUR/PIR - pipe insulation products, as placed on the market. 47
25、 Table A.20 Installation parameters for PUR/ PIR flat products in standard test configuration of assemblies, simulating end-use applications 48 Table A.21 Product parameters for PF flat products, when tested as placed on the market or in standard test configuration of assemblies . 50 Table A.22 Inst
26、allation parameters for PF flat products, as placed on the market 51 Table A.23 Product parameters for PF pipe insulation products, as placed on the market . 52 Table A.24 Installation parameters for PF pipe insulation products, as placed on the market 53 Table A.25 Installation parameters for PF fl
27、at products in standard test configuration of assemblies, simulating end-use applications 54 Table A.26 Product parameters for CG flat products when tested as placed on the market or in standard test configuration of assemblies . 56 Table A.27 Installation parameters for CG flat products, as placed
28、on the market . 58 Table A.28 Product parameters for CG pipe insulation productsa, as placed on the market . 59 Table A.29 Installation parameters for CG- linear pipe thermal insulation . 60 Table A.30 Installation parameters for CG flat products, in standard test configuration of assemblies simulat
29、ing end-use applications 61 Table A.31 Product parameters for WW flat products, when tested as placed on the market or in standard test configuration of assemblies . 63 Table A.31 (continued) . 64 Table A.32 Installation parameters WW flat products, as placed on the market 65 Licensed Copy: Wang Bin
30、, ISO/EXCHANGE CHINA STANDARDS, 13/05/2010 03:15, Uncontrolled Copy, (c) BSIBS EN 15715:2009EN 15715:2009 (E) 4 Table A.33 Installation parameters for WW flat products in standard test configuration of assemblies simulating end-use applications . 66 Table A.34 Product parameters for EPB flat product
31、s, when tested as placed on the market or in standard test configuration of assemblies 67 Table A.35 Installation parameters for EPB flat products, as placed on the market . 68 Table A.36 Installation parameters for EPB flat products in standard test configuration of assemblies simulating end-use ap
32、plications . 69 Table A.37 Product parameters for ICB flat products, when tested as placed on the market or in standard test configuration of assemblies 70 Table A. 38 Installation parameters for ICB flat products, as placed on the market . 71 Table A.39 Installation parameters for ICB flat products
33、 in standard test configuration of assemblies simulating end-use applications . 72 Table A.40 Product parameters for WF flat products, when tested as placed on the market or in standard test configuration of assemblies 73 Table A.41 Installation parameters for WF flat products, as placed on the mark
34、et . 74 Table A.42 Installation parameters for WF flat products, in standard test configuration of assemblies simulating end-use applications . 75 Table A.43 Product parameters for FEF flat products, when tested as placed on the market or in standard test configuration of assemblies 76 Table A.44 In
35、stallation parameters for FEF flat products, as placed on the market . 77 Table A.45 Product parameters for FEF pipe insulation products, as placed on the market 78 Table A.46 Installation parameters for FEF pipe insulation products, as placed on the market . 79 Table A.47 Installation parameters fo
36、r FEF for flat products in standard test configuration of assemblies simulating end-use applications . 80 Table A.48 Product parameters for CS flat products when tested as placed on the market or in standard test configuration of assemblies 82 Table A.49 Installation Parameters for CS flat products
37、as placed on the market . 83 Table A.50 Product parameters for CS pipe insulation products, as placed on the market 84 Table A.51 Installation parameters for CS pipe insulation products, as placed on the market 85 Table A.52 Installation parameters for CS flat products in standard test configuration
38、 of assemblies simulating end-use applications . 86 Table A.53 Product parameters for PEF, flat products when tested as placed on the market or in standard test configuration of assemblies 88 Table A.54 Installation parameters for PEF flat products, as placed on the market 89 Table A.55 Product para
39、meters for PEF pipe insulation products as placed on the market . 90 Table A.56 Installation parameters for PEF pipe insulation products as placed on the market . 91 Table A.57 Installation parameters for PEF for flat products in standard test configuration of assemblies simulating end-use applicati
40、ons . 92 Figures Figure 1 Installation of specimen according to EN 13823 15 Figure 2 Principle of positioning of minimum mechanical fixings 16 Figure 3 Joint arrangement for a product tested uncovered (front view) . 16 Figure 4 Schematic drawings of the mounting of the test specimens in the SBI in t
41、he case of 25 mm insulation thickness . 17 Figure 5 Fixing corrugated steel sheet (New figure is being drawn) . 24 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/05/2010 03:15, Uncontrolled Copy, (c) BSIBS EN 15715:2009EN 15715:2009 (E) 5 Foreword This document (EN 15715:2009) has been pr
42、epared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflict
43、ing national standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document
44、has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive 89/106/EEC, see informative Annex ZA, which is an integral part of this document. In p
45、ursuance of the mandate M/103 given to CEN by the European Commission and the European Free Trade Association, CEN/TC 88 had prepared a package of European Standards which was published in 2001. The aspect of instructions for mounting and fixing for reaction to fire testing not treated at that time
46、is now being dealt within this European Standard. This European Standard supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Mem
47、ber States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard provides instructions for mounting and fixing for reaction to fire testing procedure for factory made thermal insulation products in building, building
48、equipment and industrial installations. CEN/TC 88 have proposed to set the date of withdrawal (dow) of national standards which conflict with this European Standard 21 months after availability. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
49、countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United K
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1