1、BS EN 15743:2010ICS 91.100.10NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDSupersulfated cement Composition,specifications andconformity criteriaLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 06:55, Uncontrolled Copy, (c) BSIThis British Sta
2、ndard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2010. BSI 2010ISBN 978 0 580 60504 8Amendments/corrigenda issued since publicationDate CommentsBS EN 15743:2010National forewordThis British Standard is the UK implementation of EN 15743:2010. Itsupers
3、edes BS 4248:2004 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/516, Cement and lime.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary prov
4、isionsof a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 06:55, Uncontrolled Copy, (c) BSIBS EN 15743:2010EUROPEAN STANDARD NORME EUROPENNE
5、 EUROPISCHE NORM EN 15743 January 2010 ICS 91.100.10 English Version Supersulfated cement - Composition, specifications and conformity criteria Ciment sulfat - Composition, spcifications et critres de conformit Sulfathttenzement - Zusammensetzung, Anforderungen und Konformittskriterien This European
6、 Standard was approved by CEN on 11 December 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references conc
7、erning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its o
8、wn language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv
9、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brusse
10、ls 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15743:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 06:55, Uncontrolled Copy, (c) BSIBS EN 15743:2010EN 15743:2010 (E) 2 Contents Page Foreword 4Int
11、roduction .51 Scope 62 Normative references 63 Terms and definitions .64 Supersulfated cement .85 Constituents .85.1 Main constituents 85.1.1 Granulated blastfurnace slag (S) .85.1.2 Calcium sulfate (Cs) 85.2 Additional constituents .85.2.1 Portland cement clinker (K) 85.2.2 Other additional constit
12、uents (A) .85.3 Additives .96 Composition and notation 97 Mechanical, physical, chemical and durability requirements 107.1 Mechanical requirements . 107.1.1 Standard strength . 107.1.2 Early strength 107.2 Physical requirements . 107.2.1 Initial setting time . 107.2.2 Soundness . 107.2.3 Heat of hyd
13、ration 107.3 Chemical requirements 117.4 Durability requirements . 117.4.1 General . 117.4.2 Sulfate resistance . 118 Standard designation . 119 Conformity criteria 129.1 General requirements . 129.2 Conformity criteria for mechanical, physical and chemical properties and evaluation procedure 129.2.
14、1 General . 129.2.2 Statistical conformity criteria 139.2.3 Single result conformity criteria 159.3 Conformity criteria for cement composition 159.4 Conformity criteria for properties of the cement constituents 16Annex A (informative) Precautions related to the use of supersulfated cement 17A.1 Blen
15、ding with other binders 17A.2 Use of additions in concrete 17A.3 Effects of weather, striking and curing 17A.4 Heat treatment . 17Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 18ZA.1 Scope and relevant characteristics 1
16、8ZA.2 Procedure for attestation of conformity of supersulfated cements 20ZA.2.1 System of attestation of conformity . 20ZA.2.2 EC Certificate and Declaration of conformity 21ZA.3 CE marking and labelling . 21Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 06:55, Uncontrolled Copy,
17、(c) BSIBS EN 15743:2010EN 15743:2010 (E) 3 ZA.3.1 General . 21ZA.3.2 Bagged cement 22ZA.3.3 Bulk cement . 23Bibliography 24Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 06:55, Uncontrolled Copy, (c) BSIBS EN 15743:2010EN 15743:2010 (E) 4 Foreword This document (EN 15743:2010) has
18、 been prepared by Technical Committee CEN/TC 51 “Cement and building limes”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2010, and conflicting nat
19、ional standards shall be withdrawn at the latest by July 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been
20、prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Annex A is informative. This
21、European Standard sets out requirements for the composition and specifications of supersulfated cement. The scheme for the evaluation of conformity of supersulfated cement is that specified in EN 197-2. The requirements in this European Standard are based on the results of tests on cement in accorda
22、nce with parts 1, 2, 3, 7, 8 and 9 of EN 196, Methods of testing cement. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denm
23、ark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/
24、2010 06:55, Uncontrolled Copy, (c) BSIBS EN 15743:2010EN 15743:2010 (E) 5 Introduction The basis for this European Standard has been the national standards already existing in Europe. Supersulfated cement was originally standardised in several European countries, Belgium, France, Germany, Netherland
25、s and the United Kingdom, and has been used in concrete for foundations and massive structures. The demand for quick setting cements enabling early formwork removal caused the manufacturing of supersulfated cements to be superseded by those based on Portland cement clinker. Standards were either aba
26、ndoned, as in France, or kept in the catalogue of standards but never used, as in the United Kingdom. In discharging the mandate given to CEN, Technical Committee TC 51 considered the large number of different cements involved. It was decided to separate the “common cements“, where the hardening mai
27、nly depends on the hydration of calcium silicates and setting these out in EN 197-1, from “special cements“, i.e. those with additional or special properties. Supersulfated cement hardening depends on granulated blastfurnace slag activation by calcium sulfate. A lower heat of hydration than for Port
28、land cement clinker results in lower early compressive strength than common cements and a significantly lower early heat of hydration. In addition, it produces concrete which has resistance to chemically aggressive environments, such as sulfates. Ongoing developments in material technology as well a
29、s in production technology again open the option to produce supersulfated cement fulfilling the demands and requirements of the market. As the principles in hydration differ from that of “common cements“ covered by EN 197-1, CEN Technical Committee TC 51 decided to elaborate a separate standard for
30、supersulfated cement. The rate of hardening and lower early strength require that additional precautions are considered when using supersulfated cements to ensure adequate concrete curing. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 06:55, Uncontrolled Copy, (c) BSIBS EN 15743:
31、2010EN 15743:2010 (E) 6 1 Scope This European Standard defines and gives the specifications of supersulfated cement and its constituents. The definition of supersulfated cement includes the proportions in which the constituents are to be combined to produce products in accordance with this standard.
32、 The definition also includes requirements the constituents have to meet and the mechanical, physical, chemical including heat of hydration requirements. This standard also states the conformity criteria and the related rules. NOTE 1 In addition to the specified requirements, an exchange of addition
33、al information between the cement manufacturer and user may be helpful. The procedures for such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or regulations or may be agreed between the parties concerned. NOTE 2 The word “cement“
34、 in this standard is used to refer only to supersulfated cement unless otherwise specified. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editi
35、on of the referenced document (including any amendments) applies. EN 196-1, Methods of testing cement Part 1: Determination of strength EN 196-2, Methods of testing cement Part 2: Chemical analysis of cement EN 196-3, Methods of testing cement Part 3: Determination of setting times and soundness EN
36、196-7, Methods of testing cement Part 7: Methods of taking and preparing samples of cement EN 196-8, Methods of testing cement Part 8: Heat of hydration Solution method EN 196-9, Methods of testing cement Part 9: Heat of hydration Semi-adiabatic method EN 197-1, Cement Part 1: Composition, specifica
37、tions and conformity criteria for common cements EN 197-2:2000, Cement Part 2: Conformity evaluation EN 459-1, Building lime Part 1: Definitions, specifications and conformity criteria EN 934 (all parts), Admixtures for concrete, mortar and grout 3 Terms and definitions For the purposes of this docu
38、ment, the following terms and definitions apply. 3.1 heat of hydration quantity of heat generated by cement hydration within a given period of time 3.2 main constituents granulated blastfurnace slag and calcium sulfate in a proportion exceeding 90 % by mass related to the sum of all main and additio
39、nal constituents Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 06:55, Uncontrolled Copy, (c) BSIBS EN 15743:2010EN 15743:2010 (E) 7 3.3 additional constituents Portland cement clinker (K) and other additional constituents (A) used in a proportion not exceeding a total of 10 % by
40、mass related to the sum of all main and additional constituents NOTE Other additional constituents are specially selected inorganic materials of natural origin and/or derived from specified industrial processes. 3.4 strength class of supersulfated cement class of compressive strength 3.5 control per
41、iod period of production and dispatch identified for the evaluation of the autocontrol test results 3.6 characteristic value value of a required property outside of which lies a specified percentage, the percentile Pk, of all the values of the population 3.7 specified characteristic value characteri
42、stic value of a mechanical, physical or chemical property which in the case of an upper limit is not to be exceeded or in the case of a lower limit is, as a minimum, to be reached 3.8 single result limit value value of a mechanical, physical or chemical property which for any single test result in t
43、he case of an upper limit is not to be exceeded or in the case of a lower limit is, as a minimum, to be reached 3.9 allowable probability of acceptance CR for a given sampling plan, allowed probability of acceptance of cement with a characteristic value outside the specified characteristic value 3.1
44、0 sampling plan specific plan which states the (statistical) sample size(s) to be used, the percentile Pkand the allowable probability of acceptance CR 3.11 spot sample sample taken at the same time and from one and the same place, relating to the intended tests NOTE 1 It may be obtained by combinin
45、g one or more immediately consecutive increments. NOTE 2 See EN 196-7. 3.12 autocontrol testing continual testing by manufacturer of cement spot samples taken at the point(s) of release from the factory/depot. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 08/07/2010 06:55, Uncontrolled Copy
46、, (c) BSIBS EN 15743:2010EN 15743:2010 (E) 8 4 Supersulfated cement Supersulfated cement is a hydraulic binder, i.e. a finely ground inorganic material which, when mixed with water, forms a paste which sets and hardens by means of hydration reactions and processes and which, after hardening, retains
47、 its strength and stability even under water. Supersulfated cements consist mainly of granulated blastfurnace slag and calcium sulfate. They are statistically homogeneous in composition resulting from quality assured production and material handling processes. The link between these production and m
48、aterial handling processes and the conformity of cement to this standard is defined in EN 197-2. In supersulfated cement, in contrast to common cements according to EN 197-1, ground granulated blastfurnace slag is mainly activated by calcium sulfate. In order to accelerate the activation and early h
49、ydration of slag, additional constituents may be added. 5 Constituents 5.1 Main constituents 5.1.1 Granulated blastfurnace slag (S) Granulated blastfurnace slag is made by rapid cooling of a slag melt of suitable composition, as obtained by smelting iron ore in a blastfurnace and consists of at least two-thirds by mass of glassy slag and possesses hydraulic
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1