1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16069:2012Thermal insulation productsfor buildings Factory madeproducts of polyethylene foam(PEF) SpecificationCopyright European Committee for Standardization Provided by
2、IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16069:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16069:2012.The UK participation in its preparation was entrusted to TechnicalCommittee P
3、RI/72, Rigid cellular materials.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution
4、 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 69987 0ICS 91.100.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2012.Amendments issued
5、since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16069:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16069 November 2012 ICS 91
6、.100.60 English Version Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en mousse de polyethylene (PE) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produk
7、te aus Polyethylenschaum (PEF) - Spezifikation This European Standard was approved by CEN on 6 October 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any altera
8、tion. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made
9、by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia
10、, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDAR
11、DIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16069:2012: ECopyright European Committee for Standard
12、ization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16069:2012EN 16069:2012 (E) 2 Contents Page Foreword 51 Scope 62 Normative references 63 Terms, definitions, symbols, units and abbreviated terms .73.1 Terms and def
13、initions .73.2 Symbols, units and abbreviated terms 83.2.1 Symbols and units used in this European Standard .83.2.2 Abbreviated terms used in this European Standard: 104 Requirements 114.1 General . 114.2 For all applications . 114.2.1 Thermal resistance and thermal conductivity . 114.2.2 Length and
14、 width 124.2.3 Thickness 124.2.4 Squareness 124.2.5 Flatness . 134.2.6 Reaction to fire of the product as placed on the market 134.2.7 Durability characteristics . 134.3 For specific applications 134.3.1 General . 134.3.2 Dimensional stability 134.3.3 Compressive stress or compressive strength 144.3
15、.4 Tensile strength and elongation in length and width . 144.3.5 Point load . 154.3.6 Compressive creep . 154.3.7 Water absorption 154.3.8 Water vapour transmission . 154.3.9 Dynamic stiffness . 164.3.10 Compressibility . 164.3.11 Sound absorption . 174.3.12 Width length and thickness of preformed p
16、roducts . 174.3.13 Release of dangerous substances 184.3.14 Reaction to fire of the product in standardized assemblies simulating end-use applications . 184.3.15 Continuous glowing combustion 185 Test methods . 195.1 Sampling 195.2 Conditioning 195.3 Testing . 195.3.1 General . 195.3.2 Thermal resis
17、tance and thermal conductivity . 196 Designation Code . 217 Evaluation of conformity 227.1 General . 227.2 Initial type testing . 227.3 Factory production control 238 Marking and labelling . 23Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 2
18、4Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16069:2012EN 16069:2012 (E) 3 A.1 General . 24A.2 Input data 24A.3 Declared values . 24A.3.1 General . 24A.3.2 Case where t
19、hermal resistance and thermal conductivity are declared . 24Case where only thermal resistance is declared 25Annex B (normative) Initial type testing (ITT) and factory production control (FPC) 26Annex C (normative) PEF multilayered insulation products 30C.1 General . 30C.2 Requirements . 30C.2.1 For
20、 all applications 30C.2.2 For specific applications 31C.3 Test methods . 31C.4 Evaluation of conformity 31Annex D (informative) Examples for the determination of the declared values of thermal resistance and thermal conductivity for a product or a product group 32D.1 Case where both thermal resistan
21、ce and thermal conductivity are declared . 32D.2 Case where only thermal resistance is declared . 33Annex E (informative) Additional properties 35E.1 General . 35E.2 Deformation under specific compressive load and temperature conditions 35E.3 Compression modulus of elasticity . 35E.4 Bending strengt
22、h . 35E.5 Apparent density . 35E.6 Compressive stress at defined deformation 36E.7 Air flow resistivity 36E.8 Cyclic load behaviour . 36E.9 Shear behaviour 36E.10 Peel strength 36Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Direct
23、ive . 38ZA.1 Scope and relevant characteristics . 38ZA.2 Procedures for attestation of conformity of factory made PolyEthylene Foam products . 40ZA.2.1 Systems of attestation of conformity 40ZA.2.2 EC certificate and declaration of conformity 42ZA.3 CE Marking and labelling 44Bibliography 46Tables T
24、able 1 Level and classes for dimensional tolerances 12Table 2 Dimensional stability under specified temperature and humidity conditions 14Table 3 Classes for thickness tolerances 16Table 4 Levels for compressibility 17Table 5 Levels for dimensions of preformed products . 18Table 6 Test methods, test
25、 specimens and conditions 20Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 25Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN
26、 16069:2012EN 16069:2012 (E) 4 Table B.1 Minimum number of tests for ITT and minimum product testing frequencies 26Table B.2 Minimum product testing frequencies for the reaction to fire characteristics . 29Table D.1 test results . 32Table D.2 R test results . 33Table E.1 Levels of bending strength 3
27、5Table E.2 Levels for compressive stress at a defined deformation 36Table E.3 Test methods, test specimens, conditions and minimum testing frequencies . 37Table ZA.1 Relevant clauses for PolyEthylene Foam and intended use 39Table ZA.2 Systems of attestation of conformity 40Table ZA.3.1 Assignment of
28、 evaluation of conformity tasks for products under system 1 for reaction to fire and system 3 for other characteristics 41Table ZA.3.2 Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire 42Figures Figure ZA.1 Example CE mar
29、king information 45Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16069:2012EN 16069:2012 (E) 5 Foreword This document (EN 16069:2012) has been prepared by Technical Commi
30、ttee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards sh
31、all be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a ma
32、ndate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document is one of a series of standards fo
33、r thermal insulation products used in buildings, but this standard may be used in other areas where appropriate. The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal p
34、rocesses. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, F
35、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under licens
36、e with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16069:2012EN 16069:2012 (E) 6 1 Scope This European Standard specifies the requirements for factory made polyethylene foam (PEF) products, with or without facing or coating, which are used for thermal
37、insulation of buildings. The products are manufactured in the form of boards or rolls or other preformed ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in pref
38、abricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The lev
39、els required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,5 m2K/W or a declared thermal conductivity greater than 0,050 W/(mK) at 10 C are not covered by this European Standard. This standard does not co
40、ver in situ insulation products and products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14313). Further excluded are non-foamed materials such as bubble films, foils etc. 2 Normative references The following documents, in whole or in part
41、, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building ap
42、plications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination
43、of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1603, Thermal insulating products for building applications Determination of dimensional stability under constant normal laboratory conditions (23 C/50 % relative humidity) EN 1604, Th
44、ermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 1607, Thermal insulating products for building applicati
45、ons Determination of tensile strength perpendicular to faces EN 1609, Thermal insulating products for building applications Determination of short term water absorption by partial immersion EN 12086:1997, Thermal insulating products for building applications Determination of water vapour transmissio
46、n properties EN 12087, Thermal insulating products for building applications Determination of long term water absorption by immersion Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-
47、,-,-BS EN 16069:2012EN 16069:2012 (E) 7 EN 12430, Thermal insulating products for building applications Determination of the behaviour under point load EN 12431, Thermal insulating products for building applications Determination of thickness for floating floor insulation products EN 12667, Thermal
48、performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick products
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1