BS EN 16085-2012 Conservation of Cultural property Methodology for sampling from materials of cultural property General rules《文物保护 文化遗产材料中取样方法 总则》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16085:2012Conservation of Culturalproperty Methodology forsampling from materials ofcultural property GeneralrulesBS EN 16085:2012 BRITISH STANDARDNational forewordThis Bri

2、tish Standard is the UK implementation of EN 16085:2012.The UK participation in its preparation was entrusted to TechnicalCommittee B/560, Conservation of tangible cultural heritage.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does

3、 not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 70588 5ICS 97.195Compliance with a British Standard cannot confer immunity fromlegal oblig

4、ations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2012.Amendments issued since publicationDate Text affectedBS EN 16085:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16085 August 2012 ICS 97.195 English Version Conser

5、vation of Cultural property - Methodology for sampling from materials of cultural property - General rules Conservation des biens culturels - Mthodologie dchantillonnage des matriaux - Rgles gnrales Erhaltung des kulturellen Erbes - Verfahren der Probenahme an Materialien des kulturellen Erbes - All

6、gemeine Regeln This European Standard was approved by CEN on 23 June 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliog

7、raphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsib

8、ility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republi

9、c of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALIS

10、ATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16085:2012: EBS EN 16085:2012EN 16085:2012 (E) 2 Contents Page Foreword 3Introduction .4

11、1 Scope 52 Normative references 53 Terms and definitions .54 Criteria for sampling 65 Sampling plan 66 Sampling recording .67 Number of samples78 Amount of samples79 Sampling Operation .710 Packing of the sample .711 Storage conditions 7Annex A (informative) Example of sampling data sheet .8BS EN 16

12、085:2012EN 16085:2012 (E) 3 Foreword This document (EN 16085:2012) has been prepared by Technical Committee CEN/TC 346 “Conservation of cultural property”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an id

13、entical text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn at the latest by February 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be

14、held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Esto

15、nia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16085:2012EN 1608

16、5:2012 (E) 4 Introduction This is a general standard for sampling of materials constituting cultural property in order to characterize them during all stages of conservation. The sampling procedure depends on the type and condition of the material to be sampled, the specific case under study and the

17、 type of investigation chosen. Sampling is invasive and invariably causes damage, however small. It should only be undertaken if there is strong justification for it and in the closest consultation with those having responsibility for the object and those who will be studying the samples. The consul

18、tation should consider whether the same information could be obtained by non-invasive methods. BS EN 16085:2012EN 16085:2012 (E) 5 1 Scope This European Standard provides a methodology and criteria for sampling cultural property materials for their scientific investigation. It covers, for example, h

19、ow to characterize the material(s), assess the condition, determine the deterioration causes and/or mechanism(s) and decide on and/or evaluate the conservation treatment(s). Apart from sampling, this document also provides requirements for documentation, and handling of sample(s). This European Stan

20、dard does not deal with the decision making process for taking a sample nor how the sample is to be used. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition

21、 cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15898, Conservation of cultural property Main general terms and definitions EN 16095, Conservation of cultural property Condition recording for movable cultural heritage EN 16

22、096, Conservation of cultural property Condition survey and report of built cultural heritage 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 15898 and the following apply. 3.1 investigation gathering of information necessary for a conservation decisi

23、on making process 3.2 sample portion of material, ideally representative, removed from the cultural property for scientific investigation 3.3 sampling process of removing a sample 3.4 sampling plan procedure for the selection and the sampling of one or several samples with the objective of doing a s

24、cientific investigation of cultural property 3.5 scientific investigation study by means of examination, analysis, or test method to obtain information on the nature or the properties of cultural property related to issues of conservation BS EN 16085:2012EN 16085:2012 (E) 6 4 Criteria for sampling 4

25、.1 The aims of the sampling should be clearly defined and justified, and a sampling plan (see Clause 5) should be based on these aims. 4.2 Sampling should be carried out according to current legislation and/or the policy of the cultural property owner and/or the authority responsible for the care of

26、 the movable or immovable cultural property. 4.3 Prior to sampling, an appropriate record of the condition of the cultural property in accordance with EN16095 or EN16096 should be established, i.e. a condition survey or report. Sampling requires people with manual skill and knowledge of the cultural

27、 property. 4.4 The sampling should be done so as to minimize any visible and/or disrupting/damaging effects and taken, when possible, from an as inconspicuous place as possible provided that it fulfils the aims of the sampling. 4.5 Sampling should be carried out according to the specific requirement

28、s of the scientific investigation. 5 Sampling plan A sampling plan shall be established on the basis of a preliminary survey. The sampling plan shall cover the research question(s) to be addressed and shall be defined in close consultation with those having responsibility of the cultural property an

29、d those who will be studying the samples. The sampling plan shall provide an overview of the locations for taking samples, and of the number, size and nature of the sample(s) to be taken. The size and nature of the sample shall be appropriate to the research question being addressed and in accordanc

30、e with the criteria given in Clause 4. The sampling plan shall specify the person(s) authorised to take the samples, and the method of sampling. The sampling plan shall specify whether any part of the sample remaining after the investigation shall be returned to the owner/responsible person or shall

31、 be retained by the investigator. The sampling plan shall be added to the documentary archive of the object. 6 Sampling recording During the sampling operation, a sampling data sheet should be completed with all the necessary information as follows: 6.1 A sample identification code: this code is uni

32、que and should be associated with the sample at all times. 6.2 Aim or aims of the sampling: these should be related specifically to the objective of the scientific investigation. 6.3 The planned scientific investigation: this describes the intended type(s) of scientific investigation examination for

33、 the sample. 6.4 Identification of the cultural property: any existing registration code(s)/inventory number should be recorded. Reference to any existing condition surveys and/or condition reports should be included. All information related to the identification of the cultural property, such as na

34、me, author, date, etc. should be given. 6.5 Identification of the sample: a) date of sampling given as the year, month, and day “(YYYY-MM-DD)”; b) name of the person who collected the samples, and relevant contact information; BS EN 16085:2012EN 16085:2012 (E) 7 c) location of the sampling point: th

35、is should be described by written records, graphic documentation, photographs, etc. in order to confirm the sample location for future reference. Each photograph should include a metric scale and colorimetric reference when applicable; d) description of the physical state (solid, liquid, etc.), type

36、 (fragment, core, powder etc.), colour, stratigraphy of the sample; e) photographs of the sample with metric scale and colorimetric reference when applicable; f) the sampling procedure and/or type of tools used should be recorded. 6.6 Other relevant information are strongly recommended: environmenta

37、l exposure condition(s) of sample, conditions while sampling, packaging of the sample as well as other comments to be recorded at the time of sampling if deemed important, such as recommendation for storage conditions before the planned investigation. An example of sampling data sheet is given in An

38、nex A. 7 Number of samples Only a minimum though sufficient number of samples should be taken. They should be representative and in accordance with the sampling plan. 8 Amount of samples Only a minimum but sufficient amount of material should be taken. The amount of material depends on the type of c

39、ultural property, the nature of the material, and the kind of scientific investigation to be employed. 9 Sampling Operation Sampling requires appropriate tools and care needs to be taken to avoid contamination of the sample(s). Health and safety regulations should be followed for the protection of t

40、he person(s) who are sampling. 10 Packing of the sample Each sample should be packed according to the recommendations of the professional(s) who will investigate the sample(s). The sample(s) should be protected from contamination, mechanical damage, and alteration during transportation to storage. E

41、ach sample shall be identified with the sample identification code in a suitable and durable way. 11 Storage conditions Special care may be necessary to store the samples depending on their nature and state prior to investigation. BS EN 16085:2012EN 16085:2012 (E) 8 Annex A (informative) Example of

42、sampling data sheet The following is an example of a sampling data sheet. The sequence of the elements is not mandatory but would be useful: Sample identification code Unique and be associated with the sample at all times Aim of the sampling Should be related specifically to scientific investigation

43、 of the sample in question Planned investigation Describes the intended type(s) of investigation for the sample Identification of the cultural property Registration code/Inventory number Any registration code(s) should be recorded if they exist. Make reference to condition survey and/or condition re

44、port. Name/Subject Author/originDate/periodLocation City, state Owner (name, address, phone number, ) Other Identification of the sample Date of sampling Year-month-day The name of the person who carries out the sampling Person who carries out sampling, and other contact information that may be rele

45、vant The sampling locations Should be described by written records, graphic documentation and/or photographs in order to be able to find the sample location for future reference. Each photograph should include a metric scale and colorimetric reference if applicable Description of the sample Physical

46、 state, colour, stratigraphy, e. g. fragment, core, powder, liquid, solid Photo of Sample Photograph should include a metric scale and colorimetric reference if applicable Sampling method How the sample was taken, procedure and/or the type of tool Other related information Environmental exposure con

47、dition(s) of sample, conditions while sampling, as well as other comments to be recorded at the time of sampling if deemed important, such as recommendation for storage conditions before the planned investigation This page deliberately left blankBSI is the independent national body responsible for p

48、reparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limi

49、ted.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while