BS EN 16272-3-2-2014 Railway applications Track Noise barriers and related devices acting on airborne sound propagation Test method for determining the acoustic performance Normalii.pdf

1、BSI Standards PublicationBS EN 16272-3-2:2014Railway applications Track Noise barriers and relateddevices acting on airbornesound propagation Testmethod for determining theacoustic performancePart 3-2: Normalized railway noise spectrumand single number ratings for direct fieldapplicationsBS EN 16272

2、-3-2:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN16272-3-2:2014.The UK participation in its preparation was entrusted to TechnicalCommittee RAE/2, Railway Applications - Track.A list of organizations represented on this committee can beobtained on reques

3、t to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 76213 0ICS 17.140.30; 93.080.30Compliance with a B

4、ritish Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2014.Amendments issued since publicationDate Text affectedBS EN 16272-3-2:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NOR

5、M EN 16272-3-2 July 2014 ICS 17.140.30; 93.080.30 English Version Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for

6、direct field applications Applications ferroviaires - Voie - Dispositifs de rduction du bruit - Mthode dessai pour la dtermination des performances acoustiques - Partie 3-2 : Spectre de bruit ferroviaire normalis et indices uniques dvaluation pour des applications en champ direct Bahnanwendungen - O

7、berbau - Lrmschutzwnde und verwandte Vorrichtungen zur Beeinflussung der Luftschallausbreitung - Prfverfahren zur Bestimmung der akustischen Eigenschaften - Teil 3-2: Standardisiertes Schienenverkehrslrmspektrum und Einzahl-Angaben fr gerichtete Schallfelder This European Standard was approved by CE

8、N on 30 April 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards

9、may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notifie

10、d to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icela

11、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Manage

12、ment Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16272-3-2:2014 EBS EN 16272-3-2:2014EN 16272-3-2:2014 (E) 2 Contents Foreword 3 Introduction . 4 1 Scope 5 2 Normative references 5

13、 3 Terms and definitions . 5 4 Normalized railway noise spectrum. 6 5 Single-number rating of sound reflection index DLRI7 6 Single-number ratings of sound insulation index DLSI8 6.1 General 8 6.2 Acoustic elements . 8 6.3 Posts . 8 6.4 Global 9 7 Single-number ratings of sound diffraction index dif

14、ference DLDI. 9 7.1 General 9 7.2 Single-number rating of sound diffraction index difference DLDI,refl. 9 7.3 Single-number rating of sound diffraction index difference DLDI,abs10 7.4 Single-number rating of sound diffraction index difference DLDI,situ10 8 Expression of results 10 Annex A (informati

15、ve) Guidance note on use of the single-number rating of sound reflection index DLRI. 12 Annex B (informative) Guidance note on use of the single-number rating of airborne sound insulation index DLSI13 Annex C (informative) Guidance note on use of the single-number rating of sound diffraction index d

16、ifference DLDI14 BS EN 16272-3-2:2014EN 16272-3-2:2014 (E) 3 Foreword This document (EN 16272-3-2:2014) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either

17、 by publication of an identical text or by endorsement, at the latest by January 2015 and conflicting national standards shall be withdrawn at the latest by January 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or

18、CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This European Standard is one of the series EN 16272, Railway applications Track Noise

19、 barriers and related devices acting on airborne sound propagation Test method for determining the acoustic performance, as listed below: Part 1: Intrinsic characteristics Sound absorption in the laboratory under diffuse sound field conditions; Part 2: Intrinsic characteristics Airborne sound insula

20、tion in the laboratory under diffuse sound field conditions; Part 3-1: Normalized railway noise spectrum and single number ratings for diffuse field applications; Part 3-2: Normalized railway noise spectrum and single number ratings for direct field applications (the present document); Part 5: Intri

21、nsic characteristics In situ values of sound reflection under direct sound field conditions (Technical Specification); Part 6: Intrinsic characteristics In situ values of airborne sound insulation under direct sound field conditions. According to the CEN-CENELEC Internal Regulations, the national st

22、andards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

23、 Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16272-3-2:2014EN 16272-3-2:2014 (E) 4 Introduction This document is to be read in conjunction with prEN 16272-4, CEN/TS 16272-5 and EN 16272-6 and

24、will be applied only to situations as described in those documents (direct sound field). As the two main intrinsic acoustic characteristics of noise barriers and related devices acting on airborne sound propagation in a direct sound field, the sound reflection index and the sound insulation index, a

25、re frequency dependent, there is a need to define a reference railway noise spectrum for test purposes. Also the sound diffraction index difference, the main intrinsic acoustic characteristic of added devices, i.e. products which may be added on the top of noise barriers and intended to contribute t

26、o sound attenuation acting primarily on the diffracted sound field, is frequency dependent and there is an analogous need to define a reference railway noise spectrum for test purposes. This European Standard defines the basic properties of railway noise measured at the rail track side in terms of a

27、 characteristic normalized railway noise spectrum which is needed to evaluate single-number ratings of noise barriers and related devices acting on airborne sound propagation, except those used in reverberant conditions, e.g. inside tunnels or deep trenches. BS EN 16272-3-2:2014EN 16272-3-2:2014 (E)

28、 5 1 Scope This European Standard specifies a normalized railway noise spectrum for the evaluation and assessment of the acoustic performance of devices designed to reduce airborne railway noise near railways. All noise reducing devices different from noise barriers and related devices acting on air

29、borne sound propagation, e.g. devices for attenuation of ground borne vibration and on board devices, are out of the scope of this European Standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applica

30、tion. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. prEN 16272-4:2014, Railway applications Track Noise barriers and related devices acting on airborne sound propagation Test method for

31、determining the acoustic performance Part 4: Intrinsic characteristics In situ values of sound diffraction under direct sound field conditions CEN/TS 16272-5:2014, Railway applications Track Noise barriers and related devices acting on airborne sound propagation Test method for determining the acous

32、tic performance Part 5: Intrinsic characteristics In situ values of sound reflection under direct sound field conditions EN 16272-6:2014, Railway applications Track Noise barriers and related devices acting on airborne sound propagation Test method for determining the acoustic performance Part 6: In

33、trinsic characteristics In situ values of airborne sound insulation under direct sound field conditions 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 noise barrier noise reducing device, which obstructs the direct transmission of airborne s

34、ound emanating from railways Note 1 to entry: It may either span or overhang the railway. Note 2 to entry: Noise barriers are generally made of acoustic and structural elements (3.3 and 3.4). 3.2 cladding noise reducing device, which is attached to a wall or other structure and reduces the amount of

35、 sound reflected Note 1 to entry: Claddings are generally made of acoustic and structural elements (3.3 and 3.4). 3.3 acoustic element element whose primary function is to provide the acoustic performance of the device 3.4 structural element element whose primary function is to support or hold in pl

36、ace acoustic elements BS EN 16272-3-2:2014EN 16272-3-2:2014 (E) 6 Note 1 to entry: In some noise barriers the acoustic function and the structural function cannot be clearly separated and attributed to different components. 3.5 added device added component that influences the acoustic performance of

37、 the original noise-reducing device (acting primarily on the diffracted energy) 3.6 normalized railway noise spectrum spectrum that is used for the calculation of the acoustic performance of noise barriers and related devices acting on airborne sound propagation near railways, in terms of single-num

38、ber ratings of sound reflection index, sound insulation index and sound diffraction index difference, as applicable Note 1 to entry: The spectrum is expressed in terms of relative A-weighted sound pressure levels in decibels, for one-third octave bands, Li, in the frequency range from 100 Hz to 5 kH

39、z. 3.7 one-third octave bands level Lirelative A-weighted sound pressure levels in decibels, of a normalized railway noise spectrum for one-third octave bands with centre frequency range fi4 Normalized railway noise spectrum The normalized railway noise spectrum shown in Table 1 shall be used to ass

40、ess the acoustic performance of noise barriers and related devices acting on airborne sound propagation near railways. BS EN 16272-3-2:2014EN 16272-3-2:2014 (E) 7 Table 1 Normalized railway noise spectrum fiHz Lirailways dB 100 - 27 125 - 25 160 - 23 200 - 21 250 - 19 315 - 17 400 - 15 500 - 13 630

41、- 12 800 - 11 1 000 - 10 1 250 - 9 1 600 - 9 2 000 - 9 2 500 - 9 3 150 - 10 4 000 - 13 5 000 - 17 5 Single-number rating of sound reflection index DLRIA single-number rating shall be derived to indicate the performance of the product related to sound reflection index. The individual sound reflection

42、 index values shall be weighted according to the normalized railway noise spectrum defined in Table 1. The single-number rating of sound reflection index DLRI, in decibels, is given by: =181,0181,01010lg10miLmiLiRIiiRIDL (1) where RIiis the sound reflection index measured in front of the acoustic el

43、ements, in the i-th one-third octave band; m is the number of the lowest reliable one-third octave frequency band; Liis the relative A-weighted sound pressure levels (dB) of the normalized railway noise spectrum, as defined in Table 1, in the i-th one-third octave band. For product qualification tes

44、ts in laboratory conditions, the single number rating DLRIshall be calculated for samples of minimum dimensions of 4 m x 4 m. BS EN 16272-3-2:2014EN 16272-3-2:2014 (E) 8 The RIivalues to be inserted in Formula (1) are the spatial averaged values of the sound reflection index according to Table 2 of

45、CEN/TS 16272-5:2014. In some cases the ratio of the summation terms in the expression of DLRIcan exceed 1 which precludes the correct calculation of DLRI. For this reason the maximum value of this ratio shall be limited to 0,99. NOTE Annex A provides guidance to the use of the single-number rating o

46、f sound reflection index. 6 Single-number ratings of sound insulation index DLSI6.1 General Whenever possible, three single-number ratings shall be derived from measurements to indicate the performance of the product related to sound insulation index: one for acoustic elements, one for posts (if app

47、licable) and a global rating. The individual sound insulation index values coming from element scanning and post scanning shall be weighted according to the normalized railway noise spectrum defined in Table 1. 6.2 Acoustic elements The single-number rating for acoustic elements DLSI,E, in decibels,

48、 is given by: =181,0181,01,0,101010lg10,miLmiSILESIiiEiDL (2) where: SIE,iis the sound insulation index measured in front of the acoustic elements, in the i-th one-third octave band; m is the number of the lowest reliable one-third octave frequency band; Liis the relative A-weighted sound pressure l

49、evels (dB) of the normalized railway noise spectrum, as defined in Table 1, in the i-th one-third octave band. The single-number rating for acoustic elements DLSI,Eshall be calculated for samples of minimum dimensions conforming to 5.3 and 5.5.8 in EN 16272-6:2014 NOTE Annex B provides guidance to the use of the single-number rating of sound insulation index. 6.3 Posts The single-number rating for posts DLSI,P, in decibels, is given by: =181,0181,0