BS EN 16297-1-2012 Pumps Rotodynamic pumps Glandless circulators General requirements and procedures for testing and calculation of energy efficiency index (EEI)《泵 旋转动力泵 无密封垫的循环器 能.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16297-1:2012Pumps Rotodynamic pumps Glandless circulatorsPart 1: General requirements andprocedures for testing and calculation ofenergy efficiency index (EEI)BS EN 16297-1

2、:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16297-1:2012.It supersedes BS EN 1151-1:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee MCE/6, Pumps and pump testing.A list of organizations represented on

3、 this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012 ISBN 978 0 580 75131 8 I

4、CS 23.080 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2012.Amendments issued since publicationDate Text affectedBS EN 16297-1:2012 BRITISH STANDARDN

5、ational forewordThis British Standard is the UK implementon of EN 16297-1:2012.It supersedes BS EN 1151-1:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee MCE/6, Pumps and pump testing.A list of organizations represented on this committee can beobta

6、ined on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012 ISBN 978 0 580 75131 8 ICS 23.080 Compliance with

7、a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2012.Amendments issued since publicationDate Text affectedThis British Standard was published under the authority of the

8、 Standards Policy and Strategy Committee on 30 November 2012.Amendments/corrigenda issued since publicationDate Text affectedThis British Standard is the UK implementation of EN 16297-1:2012. Together with BS EN 16297-2:2012, it supersedes BS EN 1151-1:2006 which is withdrawn.BS EN 16297-1:2012EUROP

9、EAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16297-1 October 2012 ICS 23.080 Supersedes EN 1151-1:2006English Version Pumps - Rotodynamic pumps - Glandless circulators - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI) Pompes - Pompes rotody

10、namiques - Circulateurs sans presse-toupe - Partie 1: Exigences gnrales et procdures pour les essais et le calcul de lindice defficacit nergtique (IEE) Pumpen - Kreiselpumpen - Umwlzpumpen in Nassluferbauart - Teil 1: Allgemeine Anforderungen und Verfahren zur Prfung und Berechnung des Energieeffizi

11、enzindexes (EEI) This European Standard was approved by CEN on 18 August 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bib

12、liographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respo

13、nsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Rep

14、ublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORM

15、ALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16297-1:2012: EBS EN 16297-1:2012EN 16297-1:2012 (E) 2 Contents Page Foreword 3Intro

16、duction .41 Scope 52 Normative references 53 Terms and definitions .54 Symbols and units .95 Performance requirements and safety requirements 95.1 Hydraulic characteristics 95.1.1 General 95.1.2 Q100%and H100%105.2 Rated and minimum power input 105.3 Starting characteristics 105.4 Resistance to inte

17、rnal pressure 105.5 Resistance to thermal cycling . 105.6 Venting and deblocking . 105.7 Fluid and structure borne noise emission . 106 General test methods . 106.1 General . 106.2 Testing of the hydraulic characteristic . 116.2.1 Rated hydraulic output power, Phyd,r116.2.2 Reference power, Pref126.

18、2.3 Tolerance on H100%at maximum hydraulic power . 126.2.4 Reference control curve . 136.2.5 Load profile for calculation of average compensated power input, PLavg. 136.2.6 Part load operating points . 136.2.7 Calculation of compensated power input, PL. 166.2.8 Calculation of average compensated pow

19、er input, PL,avg166.2.9 Calculation of energy efficiency index (EEI), EEI166.2.10 Test conditions . 176.2.11 Testing of hydraulic performance . 186.3 Measurement of rated power input . 186.4 Starting conditions . 186.5 Testing of resistance to internal pressure . 196.6 Testing of resistance to therm

20、al cycling 196.6.1 Circulator supply voltage . 196.6.2 Intermittent operation . 197 Information for use . 207.1 General . 207.2 Instruction handbook . 207.3 Marking 20Annex ZA (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 641/2009 21B

21、ibliography . 22BS EN 16297-1:2012EN 16297-1:2012 (E) 3 Foreword This document (EN 16297-1:2012) has been prepared by Technical Committee CEN/TC 197 “Pumps”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of a

22、n identical text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the latest by April 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be he

23、ld responsible for identifying any or all such patent rights. This document, together with EN 16297-2:2012, supersedes EN 1151-1:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements

24、of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 16297 consists of the following parts under the general title Pumps Rotodynamic pumps Glandless circulators: Part 1: General requirements and procedures for testing and

25、 calculation of energy efficiency index (EEI); Part 2: Calculation of energy efficiency index (EEI) for standalone circulators; Part 3: Energy efficiency index (EEI) for circulators integrated in products. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the

26、 following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla

27、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16297-1:2012EN 16297-1:2012 (E) 4 Introduction This European Standard has been prepared under mandate M/469 EN of 22 June 2010 given to CEN by the European Commission and the

28、European Free Trade Association to provide a means of conforming to Requirements of the EU Directive 2005/32/EC of 6 July 2005 and Commission Regulation (EC) 641/2009 of 22 July 2009 by describing procedures for measurement and calculation of hydraulic power, power consumption, and energy efficiency

29、 index of circulators. The document comprises standalone circulators and circulators integrated in products. NOTE For the purpose of this document, the term “product“ is used in the sense of an appliance that generates and/or transfers heat. Standalone circulator means a circulator designed to opera

30、te independently from the product and should be tested and calculated in accordance with EN 16297-2. Circulator integrated in a product means a circulator designed to operate dependently of the products and should be tested and calculated in accordance with EN 16297-3. The following table can be use

31、d as guidance for deciding when EN 16297-3 applies. A circulator is considered to be operated dependently if it carries at least one of the design details listed in Table 1. Table 1 When EN 16297-3 applies Design Details Examples (non exhaustive list) Pump housing Designed to be mounted and used ins

32、ide a product Housings designed for use inside products e.g. with clip connections, with back panel connection or plate heat exchanger connections. Housings integrating electrically or thermally driven valve functions Control Designed to be speed controlled by the product Circulators with product sp

33、ecific control signal interfaces Safety measures Designed with safety features not suitable for stand alone operation Product takes over safety features (ISO IP classes) Circulator is a defined part of product approval or product CE marking Circulator is part of the component list of product approva

34、l or product CE marking BS EN 16297-1:2012EN 16297-1:2012 (E) 5 1 Scope This European Standard specifies general performance requirements and general requirements and procedures for testing and calculation of the energy efficiency index (EEI) for glandless circulators having a rated hydraulic output

35、 power of between 1 W and 2500 W designed for use in heating systems or cooling distribution systems. All known hazards which are likely to occur at normal installation and operation are covered by the European Standards EN 809 and EN 60335-2-51. As regards safety for electro-technical parts of circ

36、ulators, EN 60335-2-51 applies. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenc

37、ed document (including any amendments) applies. EN 1151-2:2006 Pumps Rotodynamic pumps Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise EN 5

38、0160:2007, Voltage characteristics of electricity supplied by public distribution networks EN 60335-2-51:2003, Household and similar electrical appliances Safety Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations EN ISO 9906:2012, Rotodyna

39、mic pumps Hydraulic performance acceptance tests Grades 1, 2 and 3 (ISO 9906:2012) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 heating system system where heat is generated and/or transferred 3.2 cooling distribution system system where a

40、 cooling medium is distributed 3.3 impeller pump machine to transfer mechanical energy through a rotating impeller to gain velocity and pressure for the pumped liquid 3.4 pump housing part of an impeller pump (3.3) which is connected to the pipework of the heating system (3.1) or cooling distributio

41、n system (3.2) BS EN 16297-1:2012EN 16297-1:2012 (E) 6 3.5 circulator impeller pump with or without pump housing (3.4) designed for use in heating systems (3.1) or cooling distribution systems (3.2) 3.6 glandless circulator circulator (3.5) with the rotor directly coupled to the impeller and immerse

42、d in the pumped medium Note 1 to entry: For the purpose of this document, the term circulator is used in the following in place of glandless circulator. 3.7 double circulator double pump twin head pump two circulators (3.5) mounted on a single pump housing (3.4) with two volutes 3.8 inlet pressure (

43、static pressure) pressure at the pump inlet to which the pump is subjected during operation Note 1 to entry: All pressures in this document are gauge pressures except for the differential pressure (3.9) measured in 6.2.10.4.2. 3.9 differential pressure gain in pressure between the pump inlet and pum

44、p outlet 3.10 maximum outlet working pressure sum of maximum inlet pressure (3.8) and maximum differential pressure (3.9) 3.11 hydraulic power conventional expression of the arithmetic product of the flow, Q, the head, H, and a constant Note 1 to entry For the purpose of this document, the hydraulic

45、 poweris expressed by: hyd2,72P QH= where: Phydis the hydraulic power W Q is the flow m/h H is the differential head m 2,72 is the conversion factor assuming water temperature 20 C and gravity of 9,81 m/s2 3.12 rated hydraulic output power Phyd,rhydraulic power generated by a circulator in maximum s

46、etting where the hydraulic power is maximum BS EN 16297-1:2012EN 16297-1:2012 (E) 7 3.13 system curve graphical representation of the sum of the static head and the friction loss due to flow of fluid through the system 3.14 control curve graphical representation of relationship between flow and head

47、 (H = f(Q), obtained by changing the speed of the motor automatically depending on the load Note 1 to entry: For pumps with multiple control curves, the applicable curve is selected depending on the heating system. Note 2 to entry: Examples of control curves are shown in Figure 1. HQ1 23a)HQ123b)Key

48、 a) Constant pressure control b) Variable pressure control 1 Part load 2 Full load 3 Control curve NOTE The “Dots” shows the operating points (3.19) at full load and part load operation. Figure 1 Control curve examples 3.15 non-control curve graphical representation of relationship between flow and

49、head (H = f(Q), obtained by non-automatic operation of the pump at different loads 3.16 maximum setting curve, which gives the maximum rated hydraulic output power (3.12) Note 1 to entry: This curve could be either a control curve (3.14) or a non-control curve (3.15) if that exists. 3.17 reference control curve theoretical control curve (3.14) used for standardised measurements and calculation of compensated power input (3.20) 3.18 load pro