1、BSI Standards PublicationBS EN 16340:2014Safety and control devicesfor burners and appliancesburning gaseous or liquid fuels Combustion product sensingdevicesBS EN 16340:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16340:2014.The UK participation in its
2、preparation was entrusted to TechnicalCommittee GSE/22, Safety and control devices for gas and oilburners and gas burning appliances.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisio
3、ns of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 76519 3ICS 27.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published und
4、er the authority of theStandards Policy and Strategy Committee on 31 July 2014.Amendments issued since publicationDate Text affectedBS EN 16340:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16340 June 2014 ICS 27.060.20 English Version Safety and control devices for burners and appliances
5、 burning gaseous or liquid fuels - Combustion product sensing devices Dispositifs de commande et de scurit pour brleurs et appareils utilisant des combustibles gazeux ou liquides - Dispositifs de dtection des produits de combustion Sicherheits- und Regeleinrichtungen fr Brenner und Brennstoffgerte f
6、r gasfrmige oder flssige Brennstoffe - Abgasfhler This European Standard was approved by CEN on 14 May 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any altera
7、tion. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made
8、by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia
9、, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDAR
10、DIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16340:2014 EBS EN 16340:2014EN 16340:2014
11、(E) 2 Contents Page Foreword 5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Classification 9 4.1 Classes of control 9 4.2 Groups of control.9 4.3 Classes of control functions 9 5 Units of measurement and test conditions 10 5.1 Dimensions 10 5.2 Pressures . 10 5.3 Bending moments a
12、nd torques . 10 5.4 Test conditions and measurement tolerances 10 6 Construction requirements 10 6.1 General . 10 6.2 Mechanical parts of the control . 10 6.3 Materials 11 6.4 Gas connections . 14 6.5 Electronic parts of the control . 15 6.6 Protection against internal faults for the purpose of func
13、tional safety 16 7 Performance 18 7.1 General . 18 7.2 Leak-tightness . 19 7.3 Test for leak-tightness . 19 7.4 Torsion and bending 22 7.5 Torsion and bending tests . 22 7.6 Rated flow rate 22 7.7 Test for rated flow rate . 22 7.8 Durability . 22 7.9 Performance tests for electronic controls . 23 7.
14、10 Long-term performance for electronic controls 23 7.101 Operation of the CPSD . 24 7.102 Endurance . 35 8 EMC/Electrical requirements . 36 BS EN 16340:2014EN 16340:2014 (E) 3 8.1 Protection against environmental influences. 36 8.2 Supply voltage variations below 85 % of rated voltage 36 8.3 Short-
15、term voltage interruptions and decreases . 36 8.4 Supply frequency variations 36 8.5 Surge immunity test 36 8.6 Electrical fast transient/burst . 37 8.7 Immunity to conducted disturbances . 37 8.8 Immunity to radiated fields . 37 8.9 Electrostatic discharge immunity test 37 8.10 Power frequency magn
16、etic field immunity test 37 8.11 Electrical requirements . 37 9 Marking, installation and operating instructions . 37 9.1 Marking . 37 9.2 Installation and operating instructions . 37 9.3 Warning notice . 38 Annex A (informative) Gas connections in common use in the various countries 39 Annex B (inf
17、ormative) Leak-tightness test volumetric method . 40 Annex C (informative) Leak-tightness test pressure loss method 41 Annex D (normative) Conversion of pressure loss into leakage rate 42 Annex E (normative) Electrical/electronic component fault modes 43 Annex F (normative) Additional requirements f
18、or safety accessories and pressure accessories as defined in EU Directive 97/23/EC 44 Annex G (normative) Materials for pressurized parts . 45 Annex H (informative) Additional materials for pressurized parts. 46 Annex I (normative) Requirements for controls used in DC supplied gas burners and gas bu
19、rning appliances 47 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2009/142/EC relating to appliances burning gaseous fuels 48 Bibliography 50 Figures Figure 1 CPSD coupled with combustion control system . 6 Figure 2 Clarification of
20、 definitions for CPSD . 7 Figure 4 Leak-tightness provided by the housing and mounting. 19 Figure 5 Test equipment for influence of leakage on measurement value 20 Figure 6 Response times 27 Figure 7 Alternative test equipment for response time . 28 Figure 8 Recovery time R90 31 BS EN 16340:2014EN 1
21、6340:2014 (E) 4 Tables Table 1 Measurement uncertainties .9 Table 2 material specification 13 Table 3 Saturation vapour pressure 32 Table 4 Interfering components and their concentration . 33 Table ZA.1 Correspondence between this European Standard and Directive (Directive 2009/142/EC relating to ap
22、pliances burning gaseous fuels) 47 BS EN 16340:2014EN 16340:2014 (E) 5 Foreword This document (EN 16340:2014) has been prepared by Technical Committee CEN/TC 58 “Safety and control devices for burners and appliances burning gaseous or liquid fuels”, the secretariat of which is held by BSI. This Euro
23、pean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2014, and conflicting national standards shall be withdrawn at the latest by December 2014. Attention is drawn to the possibility that some of the e
24、lements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports
25、essential requirements of EU Directive 2009/142/EC. For relationship with EU Directive 2009/142/EC, see informative Annex ZA, which is an integral part of this document. This document is intended to be used in conjunction with EN 13611:2007+A2:2011. This document refers to clauses of EN 13611:2007+A
26、2:2011 or adapts clauses by stating “with the following modification”, “with the following addition”, “is replaced by the following” or “is not applicable” in the corresponding clause. This European Standard adds clauses or subclauses to the structure of EN 13611:2007+A2:2011 which are particular to
27、 this standard. These clauses and subclauses are not indicated as an addition. i.e. subclauses or annexes which are additional to those in EN 13611:2007+A2:2011 are numbered starting from 101 or are designated as Annex AA, BB, CC etc. When referring to EN 13611:2007+A2:2011 the word “control” is und
28、erstood as “combustion product sensing device”. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fo
29、rmer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16340:2014EN 16340:2014 (E) 6 1 S
30、cope This European Standard specifies the safety, construction and performance requirements for combustion product sensing devices intended to be used in combustion control systems, hereinafter referred to as CPSD. This European Standard applies to sensing devices for the measurement of combustion p
31、roducts from burners and appliances for domestic, commercial and industrial use burning: gaseous fuels according to EN 437; or liquid fuels having a viscosity at the burner inlet of 1,6 mm2/s (cSt) up to 6 mm2/s (cSt) at 20 C, higher boiling petroleum based first raffinates (viscosity greater than 6
32、 mm2/s), that require preheating for proper atomisation. This European Standard applies to all types of stationary sensing devices measuring flue gas components O2, CO, CO2, H2, CxHy, NOX, SO2or for a combination of them (multiple gasses). This European Standard applies also to sensing devices for e
33、xtractive systems. This European Standard does not cover sensor requirements for combustible gas, combustible gas mixture and oil quality. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For d
34、ated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1856-1:2009, Chimneys - Requirements for metal chimneys - Part 1: System chimney products EN 10088-1:2005, Stainless steels - Part 1: List of
35、stainless steels EN 13611:2007+A2:2011, Safety and control devices for gas burners and gas burning appliances - General requirements EN 14241-1, Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners EN 60529:1991, Degrees of pro
36、tection provided by enclosures (IP Code) (IEC 60529) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13611:2007+A2:2011 and the following apply. 3.101 Combustion Product Sensing Device (CPSD) Combustion Product Sensing Element (CPSE) combined with con
37、trol unit and a signal conditioner Note 1 to entry: The combustion product sensing element is hereafter referred to as CPSE. Note 2 to entry: The CPSE control unit and/or the signal conditioner can be integrated in the combustion control system (see Figure 1). Note 3 to entry: Additional components
38、(e.g. heater, flame arrester) used or necessary for operation are considered as parts of the CPSD. BS EN 16340:2014EN 16340:2014 (E) 7 Figure 1 CPSD coupled with combustion control system 3.102 Combustion Product Sensing Element (CPSE) part of the CPSD, which transforms the concentration of the sens
39、ed combustion product into a physical value (e.g. voltage, current, resistance) 3.103 CPSE control unit unit that provides additional functions in order to operate the sensing element Note 1 to entry: Example of additional function is the control of the heating element. 3.104 signal conditioner elec
40、tronic circuit that transforms the physical value from the sensing element into an output signal Note 1 to entry: The signal conditioner may consist of functional electronics as well as electronics which cause the CPSD to be classified as Class B or C according to EN 13611:2007+A2:2011. 3.105 measur
41、ing range declared range between two values that can be measured by the CPSD with the accuracy stated in the installation and operating instructions 3.106 offset positive or negative deviation of the zero point value 3.107 accuracy ability of the CPSD to provide an indicated value close to the true
42、value 3.108 linearity highest value of the deviation between the CPSD output characteristic from the ideal curve 3.109 drift difference between the value indicated/measured value by the CPSD before and after the endurance test BS EN 16340:2014EN 16340:2014 (E) 8 3.110 temperature range (flue gas) te
43、mperature range of the medium to be measured 3.111 hysteresis the highest value of the difference between the ascending and the descending CPSD output characteristic Note 1 to entry: For illustration refer to Figure 2. Key 1 hysteresis X combustion product concentration Y CPSD output signal Figure 2
44、 Clarification of definitions for CPSD 3.112 repeatability ability of the CPSD to provide similar output signals whilst measuring the same concentration of combustion product under the same test condition 3.113 flue gas pressure differential pressure from flue gas side to reference (ambient) side 3.
45、114 flue gas velocity speed of the combustion product flow at the location of measurement of the CPSD (m/s) 3.115 warm up time time from power on until specified operation 3.116 stand by mode non-operational mode in which the CPSD is able to come in operation after a start up time BS EN 16340:2014EN
46、 16340:2014 (E) 9 3.117 start up time time from stand by mode until specified operation 3.118 response time Tx time interval from the start of the gas concentration step shaped change until the output signal of the CPSD has reached x % of the final value 3.119 useful lifetime time span where the CPS
47、D fulfils the specifications as stated in the installation and operating instructions 3.120 combustibles gaseous, liquid, and solid fuels Note 1 to entry: Combustibles can be oil, gas, bio-fuel, etc. 3.121 cross sensitivity influence on the measured value by any predictable flue gas component Note 1
48、 to entry: Flue gas components can be O2, CO2, H2O, SO2, NOx, CO, H2, CxHy, etc. 3.122 maximum concentration highest concentration at which the CPSD may be operated 3.123 withstand concentration concentration that is withstood without a degraded characteristic after returning below the maximum conce
49、ntration 3.124 poisoning damage to the CPSE by certain substances, reducing the useful lifetime of the CPSD 3.125 inoperative state state of the output signal that indicates the inoperative condition of the CPSD 4 Classification 4.1 Classes of control EN 13611:2007+A2:2011, 4.1 is not applicable. 4.2 Groups of control EN 13611:2007+A2:2011, 4.2. is not applicable. 4.3 Classes of control functions Shall be according to EN 13611:2007+A2:2011, 4.3. BS EN 16340:2014EN 16340:2014 (E) 10 5 Units of measurement and test conditions 5.1 Dimensi
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1