BS EN 16565-2014 Packaging Flexible tubes Test method to determine the orientation of the flip-top cap《包装 软管 测定翻盖定位的试验方法》.pdf

1、BSI Standards PublicationBS EN 16565:2014Packaging Flexible tubes Test method to determine theorientation of the flip-top capBS EN 16565:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16565:2014.The UK participation in its preparation was entrusted to Tech

2、nicalCommittee PKW/0/-/10, Packaging - Plastics.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Stand

3、ards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 81511 9ICS 55.120Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendm

4、ents issued since publicationDate Text affectedBS EN 16565:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16565 August 2014 ICS 55.120 English Version Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap Emballage - Tubes souples - Mthode dessai pour la

5、 dtermination de lorientation de lobturateur charnire Verpackung - Tuben - Prfverfahren zur Bestimmung der Ausrichtung des Klappdeckelverschlusses This European Standard was approved by CEN on 18 July 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the

6、 conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard

7、exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national

8、 standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovaki

9、a, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means r

10、eserved worldwide for CEN national Members. Ref. No. EN 16565:2014 EBS EN 16565:2014EN 16565:2014 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Test principle and testing equipment 4 3 Execution 5 4 Test report 6 Bibliography 7 BS EN 16565:2014EN 16565:2014 (E). 3 Foreword This document (EN 16565:2014)

11、 has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2015 and conflicting national

12、standards shall be withdrawn at the latest by February 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENE

13、LEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ic

14、eland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16565:2014EN 16565:2014 (E) 4 1 Scope This European Standard specifies a method to test the orientation of

15、 the flip-top cap on flexible tubes. It is applicable to aluminium, plastic and laminated tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products. 2 Test principle and testing equipment The test principle is described in Figure 1. Key a maximum devia

16、tion in mm/degree 1 axis of symmetry of cap hinge 2 deviation 3 axis of symmetry of back printed face Figure 1 Test principle Any test equipment which is able to accurately measure the correct orientation of the flip-top cap can be used. An example for a suitable test device is given in Figure 2. BS

17、 EN 16565:2014EN 16565:2014 (E). 5 Figure 2 Example for test device and measurement 3 Execution Take samples of the finished product (empty tube including flip-top cap). Measure the deviation with the test device. Read the deviation. The maximum deviation shall stay within the limits given in Table

18、1. BS EN 16565:2014EN 16565:2014 (E) 6 Table 1 Maximum deviation in mm and degree depending on tube diameter Tube diameter (in mm) Maximum deviation (in mm) Maximum deviation (in degree) 19 3 18,1 22 3 15,6 25 3 13,8 28 3 12,3 30 3 11,5 32 3 10,7 35 3 9,8 38 4 12,1 40 4 11,5 45 4 10,2 50 6 13,8 56 6

19、 12,3 60 6 11,5 Conversion formula: 360/X mm D= X = value in degrees mm = value in mm D = tube diameter in mm = 3,14 4 Test report The test report shall contain the following information: a) reference to this European Standard and, if necessary, a specification for the method of sampling and accepta

20、nce of the batch; b) the complete identification of the batch and of the tubes checked; c) the date of production; d) the number of tubes checked; e) the number of defects; f) the test result; g) all factors which could have affected the results or all operating details not specified in this Europea

21、n Standard; h) date, place of test and name of tester. BS EN 16565:2014EN 16565:2014 (E). 7 Bibliography 1 EN 12374, Packaging - Flexible tubes - Terminology This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and oth

22、er standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bri

23、ng together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process.

24、 Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Ser

25、vices team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other St

26、andards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have in

27、stant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, bot

28、h in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing M

29、ember and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is curre

30、nt. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publ

31、ication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standar

32、dization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying,

33、 recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW