BS EN 16584-2-2017 Railway applications Design for PRM use General requirements Information《轨道交通 PRM使用设计 通用要求 信息》.pdf

1、BS EN 16584-2:2017 Railway applications Design for PRM use General r e q u i r e m e n t s Part 2: Information BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 16584-2:2017 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN

2、16584-2:2017. The UK committee draws users attention to the distinction between normative and informative elements, as defined in Clause 3 of the CEN/CENELEC Internal Regulations, Part 3. Normative: requirements conveying criteria to be fulfilled if compliance with the document is to be claimed and

3、from which no deviation is permitted. Informative: information intended to assist the understanding or use of the document. Informative annexes do not contain requirements, except as optional requirements, and are not mandatory. For example, a test method may contain requirements, but there is no ne

4、ed to comply with these requirements to claim compliance with the standard. When speeds in km/h require unit conversion for use in the UK, users are advised to use equivalent values rounded to the nearest whole number. The use of absolute values for converted units should be avoided in these cases.

5、In this standard the equivalent speed for 80 km/h should be taken to be 50 mph. The UK participation in its preparation was entrusted to Technical Committee RAE/1/-/15, Railway Applications - People with Reduced Mobility. A list of organizations represented on this committee can be obtained on reque

6、st to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017 ISBN 978 0 580 74359 7 ICS 11.180.01; 45.020 Compliance with

7、 a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2017. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dBS EN 16584-2:2017 EUROPEAN STANDARD

8、NORME EUROPENNE EUROPISCHE NORM EN 16584-2 January 2017 ICS 11.180.01; 45.020 English Version Railway applications - Design for PRM use - General requirements - Part 2: Information Applications ferroviaires - Conception destine lusage par les PMR: Exigences gnrales - Partie 2: Informations Bahnanwen

9、dungen - Gestaltung fr die Nutzung durch PRM - Allgemeine Anforderungen - Teil 2: Informationen This European Standard was approved by CEN on 10 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

10、the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, Fr

11、ench, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgari

12、a, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerlan

13、d, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Mem

14、bers. Ref. No. EN 16584-2:2017 EBS EN 16584-2:2017 EN 16584-2:2017 (E) 2 Contents Page European foreword . 5 Introduction 6 1 Scope 7 2 Normative references 8 3 Terms and definitions . 8 4 Symbols and abbreviations 13 5 Requirements and assessment 13 5.1 General . 13 5.2 Infrastructure 13 5.2.1 Park

15、ing facilities for persons with disabilities and persons with reduced mobility 13 5.2.2 Obstacle free routes 14 5.2.3 Doors and entrances . 16 5.2.4 Ticketing, information desks and customer assistance points . 16 5.2.5 Visual information: signposting, pictograms, printed or dynamic information . 18

16、 5.2.6 Spoken information . 20 5.2.7 Platform danger area and edges of platforms . 20 5.2.8 End of platforms . 21 5.2.9 Platform wheelchair boarding aid operational zone . 21 5.2.10 Level track crossings . 21 5.2.11 Displays 22 5.3 Rolling stock . 22 5.3.1 Seats 22 5.3.2 Wheelchair spaces . 23 5.3.3

17、 Doors . 23 5.3.4 Toilets . 27 5.3.5 Customer information 28 5.3.6 Internal and external displays 34 5.3.7 Call for aid device . 35 5.3.8 Wheelchair accessible sleeping accommodation . 36 6 Methodologies . 37 6.1 Internal display scrolling speed and character display duration 37 6.1.1 General . 37 6

18、.1.2 Methodology 37 Annex A (normative) PRM signage 39 A.1 Infrastructure signs . 39 A.2 Rolling stock signs . 39 A.3 International wheelchair sign . 39 A.4 Inductive loop (coupling) sign . 40 A.5 Call for aid . 40 A.6 Priority seating signs 40 BS EN 16584-2:2017 EN 16584-2:2017 (E) 3 Annex B (norma

19、tive) Tactile characteristics . 42 B.1 Tactile pictograms and characters 42 B.2 Tactile controls . 43 B.3 Tactile feedback or tactile indication . 44 Annex C (normative) Eye point dimensions 45 Annex D (normative) Visual acuity for displays . 46 Annex E (normative) Specific braille Requirements 54 A

20、nnex F (normative) Characteristics of easily readable . 55 Annex G (normative) Passenger external doors audible signals . 59 G.1 General . 59 G.2 Door opening - Characteristics 59 G.3 Door close - Characteristics 60 Annex H (normative) EC verification . 61 H.1 Interoperability constituents 61 H.1.1

21、Conformity assessment 61 H.1.2 Application of modules 61 H.2 Subsystems . 62 H.2.1 EC verification (general) 62 H.2.2 Procedures for EC verification of a subsystem (modules) 62 Annex I (normative) Summary of testing requirements . 64 Annex J (informative) Other specific braille requirements . 66 J.1

22、 General requirements for braille . 66 J.2 Checking readability of braille 66 J.3 Recommendations for braille carrier material . 67 J.4 The braille cell . 67 J.5 Marburg medium spacing convention for braille . 68 J.6 Braille character sets 68 Annex K (informative) Pictograms examples and Good practi

23、ce 70 Annex L (informative) Examples of toilet control device good practice . 75 L.1 Orientation of equipment and associated labels 75 L.2 Function identification . 75 L.2.1 General . 75 L.2.2 Visual identification of the function should be pictograms or simple words 75 L.2.3 Tactile identification

24、of the function . 75 L.3 “Vacant / occupied / out of service” indicator . 78 L.3.1 General . 78 BS EN 16584-2:2017 EN 16584-2:2017 (E) 4 L.3.2 Visual recognition: . 78 L.3.3 Acoustic recognition . 79 Annex M (informative) Electronic display assessment guidance 80 M.1 General . 80 M.2 Worked through

25、assessment example . 81 Annex N (informative) Examples of sans serif fonts . 82 Annex O (informative) Examples of tactile toilet door locking devices 84 Annex P (informative) Door buttons 87 P.1 Examples of door buttons . 87 P.2 Visual and tactile symbols on or near door buttons 87 Annex ZA (informa

26、tive) Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC aimed to be covered . 89 Bibliography . 91 BS EN 16584-2:2017 EN 16584-2:2017 (E) 5 European foreword This document (EN 16584-2:2017) has been prepared by Technical Committee CEN/TC 256 “Railw

27、ay Applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2017, and conflicting national standards shall be withdrawn at the latest by July 20

28、17. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commi

29、ssion and the European Free Trade Association, and supports essential requirements of EU Directive 2008/57/EC. For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standard

30、s organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem

31、bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16584-2:2017 EN 16584-2:2017 (E) 6 Introduction This document is part of a suite of four Design for PRM use standards that have in total nine par

32、ts: EN 16584 is a standard that covers both infrastructure and rolling stock Railway applications Design for PRM use General requirements: Part 1: Contrast (EN 16584-1) Part 2: Information (EN 16584-2) Part 3: Optical and friction characteristics (EN 16584-3) EN 16585 is a standard that covers rolli

33、ng stock Railway applications Design for PRM use Equipment and components on board rolling stock: Part 1: Toilets (EN 16585-1) Part 2: Elements for sitting, standing and moving (EN 16585-2) Part 3: Clearways and internal doors (EN 16585-3) EN 16586 is a standard that covers rolling stock Railway app

34、lications Design for PRM use Accessibility of persons with reduced mobility to rolling stock: Part 1: Steps for access and egress (EN 16586-1) Part 2: Boarding aids (EN 16586-2) EN 16587 is a standard that covers infrastructure Railway applications Design for PRM use Requirements for obstacle free r

35、outes for infrastructure. These standards aim to clarify the requirements (with clear and consistent terms and definitions) and to define the associated criteria and, where appropriate, methodologies to allow a clear pass/fail assessment. BS EN 16584-2:2017 EN 16584-2:2017 (E) 7 1 Scope This Europea

36、n Standard describes the specific Design for PRM use requirements applying to both infrastructure and rolling stock and the assessment of those requirements. The following applies to this standard: The definitions and requirements describe specific aspects of Design for PRM use required by persons w

37、ith disabilities and persons with reduced mobility as defined in the PRM TSI. This standard defines elements which are universally valid for obstacle free travelling including lighting, contrast, tactile feedback, transmission of visual and acoustic information. The definitions and requirements of t

38、his standard cover the infrastructure and the rolling stock applications. This standard only refers to aspects of accessibility for PRM passengers it does not define non PRM related requirements and definitions. This standard assumes that the infrastructure or rolling stock is in its defined operati

39、ng condition. Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements. The General requirements standard is written in three parts: Part 1 contains contrast; This document is Part 2 and contains spoken information; written information; tactile information; pictogra

40、ms; Part 3 contains lighting; low reflective properties; transparent obstacles; slip resistance. BS EN 16584-2:2017 EN 16584-2:2017 (E) 8 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For da

41、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 81-70:2003, Safety rules for the construction and installations of lifts Particular applications for passenger and good passengers lifts Part 7

42、0: Accessibility to lifts for persons including persons with disability EN 16584-1:2017, Railway applications Design for PRM use General requirements Part 1: Contrast EN 16584-3, Railway applications Design for PRM use General requirements Part 3: Optical and friction characteristics EN 16585-1, Rai

43、lway applications Design for PRM use Equipment and components on board rolling stock Part 1: toilets EN 16585-2:2017, Railway applications Design for PRM use Equipment and components on board rolling stock Part 2: Elements for sitting, standing and moving prEN 16587:2013, Railway applications Design

44、 for PRM use Requirements for obstacle free routes for infrastructure EN 60268-16, Sound system equipment Part 16: Objective rating of speech intelligibility by speech transmission index (IEC 60286-16) ISO 3864-1, Graphical symbols Safety colours and safety signs Part 1: Design principles for safety

45、 signs and safety markings ISO 7000, Graphical symbols for use on equipment Registered symbols ISO 7001, Graphical symbols Public information symbols ISO 21542, Building construction Accessibility and usability of the built environment ETSI EN 301 462 (2000-03), Human Factors (HF); Symbols to identi

46、fy telecommunications facilities for deaf and hard of hearing people 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 ascender part of any of the characters b, d, f, h, i, j, k, l or t which protrudes above the x-height of the character Note 1

47、 to entry: For examples see Annex F 3.2 bezel raised area that surrounds a pressel as part of a pushbutton BS EN 16584-2:2017 EN 16584-2:2017 (E) 9 3.3 character height vertical size of uppercase letters or numbers Note 1 to entry: For examples see Annex F. 3.4 compressed ascender ascender that has

48、been compressed or squashed or misaligned and does not use a consistent x-height and/or ascender height Note 1 to entry: For examples see Annex F. 3.5 compressed descender descender that has been compressed or squashed or misaligned and does not use a consistent x- height and/or descender height Not

49、e 1 to entry: For examples see Annex F. 3.6 contrast perception of a difference visually between one surface or element of a building/rail vehicle and another by reference to their light reflectance values (LRV) or luminance values Note 1 to entry: See BS 8300:2009+A1 2010 for further information. 3.7 customer information all visual and spoken information other than information intended only for staff 3.8 descender part of any o