BS EN 16783-2017 Thermal insulation products Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations《隔热产品 为编制环保产品.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Thermal insulation products Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarationsBS EN 16783:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN

2、16783 April 2017 ICS 91.120.10 English Version Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations Produits isolants thermiques - Rgles rgissant les catgories de produits (RCP) pour les produits manu

3、facturs et forms en place, destines la prparation des dclarations environnementales des produits Wrmedmmstoffe - Produktkategorieregeln (PCR) fr werkmig hergestellte und an der Verwendungsstelle hergestellte Wrmedmmstoffe zur Erstellung von Umweltproduktdeklarationen This European Standard was appro

4、ved by CEN on 16 January 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

5、 standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language

6、and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hun

7、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG

8、 CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16783:2017 ENational forewordThis British Standard is the UK implementation of EN 16783:2017.The UK participatio

9、n in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a c

10、ontract. Users are responsible for its correct application.ISBN 978 0 580 86698 2ICS 91.120.10Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2017.Amendm

11、ents/corrigenda issued since publicationDate Text affected BRITISH STANDARDBS EN 16783:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16783 April 2017 ICS 91.120.10 English Version Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for p

12、reparing environmental product declarations Produits isolants thermiques - Rgles rgissant les catgories de produits (RCP) pour les produits manufacturs et forms en place, destines la prparation des dclarations environnementales des produits Wrmedmmstoffe - Produktkategorieregeln (PCR) fr werkmig her

13、gestellte und an der Verwendungsstelle hergestellte Wrmedmmstoffe zur Erstellung von Umweltproduktdeklarationen This European Standard was approved by CEN on 16 January 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro

14、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official version

15、s (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Be

16、lgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Swed

17、en, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CE

18、N national Members. Ref. No. EN 16783:2017 EBS EN 16783:2017EN 16783:2017 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Symbols and abbreviations . 5 5 General aspects 6 5.1 Objective of the complementary PCR for insulation

19、products 6 5.2 Types of EPD with respect to life cycle stages covered 6 5.3 Comparability of EPD for construction products 8 5.4 Additional information . 8 5.5 Ownership, responsibility and liability for the EPD . 8 5.6 Communication formats . 8 6 Product Category Rules for LCA . 9 6.1 Product categ

20、ory . 9 6.2 Life cycle stages and their information modules to be included . 9 6.3 Calculation rules for the LCA . 9 6.3.1 Functional unit . 9 6.3.2 Declared unit 9 6.3.3 Reference service life (RSL). 9 6.3.4 System boundaries 10 6.3.5 Criteria for the exclusion of inputs and outputs . 11 6.3.6 Sele

21、ction of data 11 6.3.7 Data quality requirements 11 6.3.8 Developing product level scenarios 11 6.3.9 Units 11 6.4 Inventory analysis . 11 6.5 Impact assessment . 11 7 Content of the EPD . 12 8 Project report 12 9 Verification and validity of an EPD 12 Annex A (normative) Applications for thermal in

22、sulation 13 Bibliography . 16 BS EN 16783:2017EN 16783:2017 (E) 3 European foreword This document (EN 16783:2017) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status

23、of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2017, and conflicting national standards shall be withdrawn at the latest by October 2017. Attention is drawn to the possibility that some of the elements of this document may be the subjec

24、t of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,

25、Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey an

26、d the United Kingdom. BS EN 16783:2017EN 16783:2017 (E) 4 Introduction This European Standard provides rules for the assessment and quantification of parameters describing the environmental impact of thermal insulation products to prepare environmental product declarations. It defines complementary

27、product category rules for thermal insulation products based on the core rules for all construction products established in EN 15804. These rules are intended to be used in conjunction with EN 15804. These PCR apply to all CEN/TC 88 thermal insulation product Standards (EN 13162 to EN 13171, EN 1406

28、3-1, EN 14064-1, EN 14303 to EN 14309, EN 14313, EN 14314, EN 14315-1 to EN 14320, EN 14933, EN 14934, prEN 15100-1, EN 15101-1, EN 15501, EN 15599-1, EN 15600-1, EN 15732, EN 16069) in order to minimize intra-sectoral deviations. These PCR are also valid for thermal insulation products outside of C

29、EN/TC88 and for thermal insulation products involved in other CEN TCs. As in EN 15804, the results from the assessment are expressed following the modularity principle in a form that allows aggregation (addition) to provide complete information for construction works. These PCR do not deal with aggr

30、egation at the construction works level nor does it describe the rules for applying the environmental parameters in a construction works assessment. The reduction in energy used and the reduction of emissions produced during the installed life of insulation products exceed by far the energy used and

31、 in most cases the emissions occurring during the production, installation and disposal processes. Clause 5.4 of this European Standard provides the rules for declaration of any such benefits as additional information. NOTE The titles of the clauses in this European Standard follow the EN 15804 to e

32、nhance readability. BS EN 16783:2017EN 16783:2017 (E) 5 1 Scope This European Standard provides the product category rules (PCR) for Type III environmental declarations (as in EN 15804) for factory made and in situ thermal insulation products. Complementary to EN 15804, the PCR described in this Eur

33、opean Standard: specify the declared unit to be used; define the system boundaries for thermal insulation products; specify/describe the default scenarios and rules for defining scenarios for certain life cycle information modules. These PCR are intended to be used for cradle to gate, cradle to gate

34、 with options or cradle to grave assessment, provided the intention is properly stated in the system boundary description. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references,

35、 only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13172, Thermal insulation products - Evaluation of conformity EN 15804:2012+A1:2013, Sustainability of construction works - Environmental product declarations

36、 - Core rules for the product category of construction products EN 15942, Sustainability of construction works - Environmental product declarations - Communication format business-to-business EN 15978, Sustainability of construction works - Assessment of environmental performance of buildings - Calc

37、ulation method EN ISO 9229, Thermal insulation - Vocabulary (ISO 9229) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 9229, EN 15804:2012+A1:2013 and the following apply. 3.1 biogenic carbon carbon derived from/contained in biomass 3.2 biomass ma

38、terial of biological origin excluding material embedded in geological formations and material transformed to fossilised material 4 Symbols and abbreviations For the purpose of this document, the abbreviations given in EN ISO 9229 and EN 15804 and the abbreviations given in Annex A apply. BS EN 16783

39、:2017EN 16783:2017 (E) 6 5 General aspects 5.1 Objective of the complementary PCR for insulation products As in EN 15804 and the Scope of this European Standard. 5.2 Types of EPD with respect to life cycle stages covered These PCR identify three main families of EPD: 1) EPD for factory made insulati

40、on products; 2) EPD for products intended to be used as in situ insulation products excluding installation; 3) EPD for products to be used as in situ insulation products including installation. To be in compliance with this European Standard, the declaration of the product stage modules A1-A3 is req

41、uired as a minimum for those thermal insulation products that have their applicable technical characteristics (e.g. thermal resistance) at the factory gate. In addition, for in situ formed thermal insulation products that establish their applicable technical characteristics after activities on site,

42、 the declaration of Module A5 “installation” of the construction process stage is also required. The declaration of the modules of the other life cycle stages is optional. For each of these EPD, mandatory and voluntary stages to be covered are described as in Figure 1. BS EN 16783:2017EN 16783:2017

43、(E) 7 Key m mandatory o optional i mandatory provision of scenario description and technical information Figure 1 Modules 1) EPD for factory made thermal insulation products: a cradle to gate EPD: modules A1, A2 and A3 mandatory; a cradle to gate EPD with options: modules A1, A2 and A3 mandatory, th

44、e other modules optional (i.e. cradle to gate and selected further life cycle stages) ; a cradle to grave EPD: modules A to C mandatory BS EN 16783:2017EN 16783:2017 (E) 8 2) EPD for products intended to be used as in situ thermal insulation excluding installation: a cradle to gate EPD: modules A1,

45、A2 and A3 mandatory and a mandatory description of a scenario for module A5 including the necessary activities to obtain the final insulation product out of the product; a cradle to gate EPD with options: modules A1, A2 and A3 mandatory, a mandatory description of a scenario for module A5 including

46、the necessary activities to obtain the final insulation product out of the product. The other modules optional (i.e. cradle to gate and selected further life cycle stages); a cradle to grave EPD: modules A to C mandatory. 3) EPDs for products to be used as in situ thermal insulation products includi

47、ng installation: a cradle to gate EPD with options: modules A1, A2, A3 and A5 mandatory, the other modules optional (i.e. cradle to gate and selected further life cycle stages); a cradle to grave EPD: modules A to C mandatory. 5.3 Comparability of EPD for construction products In principle, the comp

48、arison of products on the basis of their EPD is defined by the contribution they make to the environmental performance of the construction works. Consequently comparison of the environmental performance of construction products using the EPD information shall be based on the products use in and its

49、impacts on the construction works, and shall consider the complete life cycle (all information modules). NOTE This is especially true for insulation products of which their main purpose is to reduce the energy consumption in the use stage of buildings. Since the reduction of the environmental impacts due to energy savings during the use stage is in most cases much higher than the environmental impacts of the insulation products themselves, it makes more sense to focus on good performance on building level during use