BS EN 16798-5-1-2017 Energy performance of buildings Ventilation for buildings Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6.pdf

1、Energy performance of buildings Ventilation for buildingsPart 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) Method 1: Distribution and generationBS EN 16798-5-1:2017BSI Standards PublicationWB11885_BSI_Standa

2、rdCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16798-5-1 May 2017 ICS 91.120.10; 91.140.30 Supersedes EN 15241:2007English Version Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventil

3、ation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation Performance nergtique des btiments - Ventilation des btiments - Partie 5-1: Mthodes de calcul des besoins nergtiques des systmes de ventilation et de conditionnement dair (Modules

4、M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Mthode 1: Distribution et gnration Energieeffizienz von Gebuden - Lftung von Gebuden - Teil 5-1: Berechnungsmethoden fr den Energiebedarf von Lftungs- und Klimaanlagen (Module M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Methode 1: Verteilung und Erzeugung This Europea

5、n Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references con

6、cerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member i

7、nto its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

8、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCH

9、ES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16798-5-1:2017 ENational forewordThis British Standard is the UK implementation of EN 16798

10、-5-1:2017. It supersedes BS EN 15241:2007 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee RHE/2, Ventilation for buildings, heating and hot water services.A list of organizations represented on this committee can be obtained on request to its secretary

11、.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 86288 5ICS 91.140.30; 91.120.10Compliance with a British Standard

12、cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 16798-5-1:2017EUROPEAN STANDARD NORME EUROPENNE

13、EUROPISCHE NORM EN 16798-5-1 May 2017 ICS 91.120.10; 91.140.30 Supersedes EN 15241:2007English Version Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5

14、, M7-8) - Method 1: Distribution and generation Performance nergtique des btiments - Ventilation des btiments - Partie 5-1: Mthodes de calcul des besoins nergtiques des systmes de ventilation et de conditionnement dair (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Mthode 1: Distribution et gnration

15、 Energieeffizienz von Gebuden - Lftung von Gebuden - Teil 5-1: Berechnungsmethoden fr den Energiebedarf von Lftungs- und Klimaanlagen (Module M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Methode 1: Verteilung und Erzeugung This European Standard was approved by CEN on 27 February 2017. CEN members are boun

16、d to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CE

17、N-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre h

18、as the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L

19、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B

20、-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16798-5-1:2017 EBS EN 16798-5-1:2017EN 16798-5-1:2017 (E) 2 Contents Page European foreword . 4 Introduction 7 1 Scope 9 2 Normative references . 11 3 Terms and de

21、finitions 12 4 Symbols and subscripts . 13 4.1 Symbols 13 4.2 Subscripts 14 5 Brief description of the method 14 5.1 Output of the method 14 5.2 General description of the method 14 6 Calculation method 15 6.1 Output data . 15 6.2 Calculation time interval . 18 6.3 Input data 18 6.3.1 Source of data

22、, general . 18 6.3.2 Product data . 18 6.3.3 System design data 24 6.3.4 Operating conditions 29 6.3.5 Constants and physical data . 30 6.3.6 Input data from Annex A (Annex B) 31 6.4 Calculation procedure 31 6.4.1 Applicable time intervals 31 6.4.2 Distribution calculation . 31 6.4.3 Generation calc

23、ulation . 35 7 Quality control 54 8 Compliance check. 54 Annex A (normative) Input and method selection data sheet Template . 55 A.1 General . 55 A.2 References 56 A.3 Product description data . 56 A.4 Product technical data . 56 A.4.1 Duct tightness class . 56 A.4.2 Air handling unit tightness clas

24、s 56 A.4.3 Heat recovery leakage and outdoor air factors . 57 A.4.4 Nominal heat recovery temperature efficiency and constants for the velocity dependence 57 A.4.5 Humidity recovery efficiency and constants for the calculation 58 A.4.6 Value for adiabatic cooling humidifier efficiency 58 A.4.7 Value

25、s for cooling and heating coil calculation . 58 A.4.8 Air handling unit related values . 59 A.4.9 Specific pump energy for humidification 59 A.5 System design data 60 BS EN 16798-5-1:2017EN 16798-5-1:2017 (E) 3 A.5.1 Qualitative process design data choices . 60 A.5.2 Fan motor heat recovery factors

26、. 60 A.5.3 Quantitative process design data choices 60 A.5.4 Limit values for the defrost control . 61 A.5.5 Process control options 61 A.5.6 Heat recovery control options . 61 Annex B (informative) Input and method selection data sheet Default choices . 62 B.1 General . 62 B.2 References . 62 B.3 P

27、roduct description data . 63 B.4 Product technical data 63 B.4.1 Duct tightness class 63 B.4.2 Air handling unit tightness class . 64 B.4.3 Heat recovery leakage and outdoor air factors . 64 B.4.4 Nominal heat recovery temperature efficiency and constants for the velocity dependence . 64 B.4.5 Humid

28、ity recovery efficiency and constants for the calculation . 65 B.4.6 Value for adiabatic cooling humidifier efficiency . 65 B.4.7 Values for cooling and heating coil calculation . 65 B.4.8 Air handling unit related default values 66 B.4.9 Specific pump energy for humidification . 66 B.5 System desig

29、n data . 67 B.5.1 Qualitative process design data choices . 67 B.5.2 Fan motor heat recovery factors . 67 B.5.3 Quantitative process design data choices 67 B.5.4 Limit values for the defrost control . 68 B.5.5 Control options 68 B.5.6 Heat recovery control options . 68 Annex C (normative) Calculatio

30、n method for ground preheating and -cooling 70 C.1 Calculation. 70 C.1.1 Temperature difference . 70 C.1.2 Moisture difference 71 C.1.3 Pressure losses of the heat exchanger 72 C.2 Data 72 Annex D (informative) Calculation method for rotary heat exchangers . 73 D.1 Calculation. 73 D.1.1 Heat recover

31、y . 73 D.1.2 Moisture recovery 73 D.2 Data 75 Bibliography . 76 BS EN 16798-5-1:2017EN 16798-5-1:2017 (E) 4 European foreword This document (EN 16798-5-1:2017) has been prepared by Technical Committee CEN/TC 156 “Ventilation for buildings”, the secretariat of which is held by BSI. This European Stan

32、dard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2017, and conflicting national standards shall be withdrawn at the latest by November 2017. Attention is drawn to the possibility that some of the elements o

33、f this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15241:2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free T

34、rade Association. Regarding the modifications that were made with regard to EN 15241:2007, these are listed in the last paragraph in the Introduction. This standard has been produced to meet the requirements of Directive 2010/31/EU 19 May 2010 on the energy performance of buildings (recast), referre

35、d to as “recast EPDB”. EN 15241:2007 was produced to meet the requirements of Directive 2002/91/EC 16 December 2002 on energy performance of buildings referred to as “EPBD”. For the convenience of Standards users CEN/TC 156, together with the responsible Working Group Convenors, have prepared a simp

36、le table below relating, where appropriate, the relationship between the EPBD and recast EPBD standard numbers prepared by Technical Committee CEN/TC 156 “Ventilation for buildings”. EPBD EN Number Recast EPBD EN Number Title EN 15251 EN 16798-1 Energy performance of buildings Ventilation for buildi

37、ngs Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (Module M1-6) (revision of EN 15251) N/A CEN/TR 16798-2 Energy performance of buildings Ventilation for buildings

38、Part 2: Interpretation of the requirements in EN 16798-1 Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (Module M1-6) BS EN 16798-5-1:2017EN 16798-5-1:2017 (E) 5 EPBD EN Num

39、ber Recast EPBD EN Number Title EN 13779 EN 16798-3 Energy performance of buildings Ventilation for buildings Part 3: For non-residential buildings Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4) (revision of EN 13779) N/A CEN/TR 16798-4 Energy performance

40、 of buildings Ventilation for buildings Part 4: Interpretation of the requirements in EN 16798- 3 For non-residential buildings Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) EN 15241 EN 16798-5-1 Energy performance of buildings Ventilation for buildings P

41、art 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) Method 1: Distribution and generation (revision of EN 15241) EN 15241 EN 16798-5-2 Energy performance of buildings Ventilation for buildings Part 5-2: Calcula

42、tion methods for energy requirements of ventilation systems (Modules M5-6.2, M5-8.2) Method 2: Distribution and generation (revision of EN 15241) N/A CEN/TR 16798-6 Energy performance of buildings Ventilation for buildings Part 6: Interpretation of the requirements in EN 16798-5-1 and EN 16798-5-2 C

43、alculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M 6-5, M6-8 , M7-5, M7-8) EN 15242 EN 16798-7 Energy performance of buildings Ventilation for buildings Part 7: Calculation methods for the determination of air flow rates in buildings includi

44、ng infiltration (Module M5-5) (revision of EN 15242) N/A CEN/TR 16798-8 Energy performance of buildings Ventilation for buildings Part 8: Interpretation of the requirements in EN 16798-7 Calculation methods for the determination of air flow rates in buildings including infiltration (Module M5-5) EN

45、15243 EN 16798-9 Energy performance of buildings Ventilation for buildings Part 9: Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9) General (revision of EN 15243) BS EN 16798-5-1:2017EN 16798-5-1:2017 (E) 6 EPBD EN Number Recast EPBD EN Number Title N/A CEN/T

46、R 16798-10 Energy performance of buildings Ventilation for buildings Part 10: Interpretation of the requirements in EN 16798-9 Calculation methods for energy requirements of cooling systems (Module M4-1,M4-4, M4-9) General N/A EN 16798-13 Energy performance of buildings Ventilation for buildings Par

47、t 13: Calculation of cooling systems (Module M4-8) Generation N/A CEN/TR 16798-14 Energy performance of buildings Ventilation for buildings Part 14: Interpretation of the requirements in EN 16798-13 Calculation of cooling systems (Module M4-8) Generation N/A EN 16798-15 Energy performance of buildin

48、gs Ventilation for buildings Part 15: Calculation of cooling systems (Module M4-7) Storage N/A CEN/TR 16798-16 Energy performance of buildings Ventilation for buildings Part 16: Interpretation of the requirements in EN 16798-15 Calculation of cooling systems (Module M4-7) Storage EN 15239 and EN 152

49、40 EN 16798-17 Energy performance of buildings Ventilation for buildings Part 17: Guidelines for inspection of ventilation and air- conditioning systems (Module M4-11, M5-11, M6-11, M7-11) N/A CEN/TR 16798-18 Energy performance of buildings Ventilation for buildings Part 18: Interpretation of the requirements in EN 16798-17 Guidelines for inspection of ventilation and air-conditioning systems (Module M4-11, M5-11, M6-11, M7