1、BRITISH STANDARD BS EN 168101:1997 Incorporating Amendment No.1 to BS CECC68101:1990 (renumbers BS as BSEN168101:1997) Harmonized system of quality assessment for electronic components Blank detail specification: Quartzcrystal units (Capability approval) The European Standard EN168101:1992 has the s
2、tatus of a BritishStandard ICS 31.140BSEN168101:1997 This BritishStandard, having been prepared under the directionof the Electronic Components Standards Policy Committee, was published underthe authority of the BoardofBSI and comes into effect on 31December1990 BSI03-2000 The following BSI referenc
3、es relate to the work on this standard: Committee referenceECL/11 Draft for comment89/28711DC ISBN 0 580 19165 6 Committees responsible for this British Standard The preparation of this BritishStandard was entrusted by the Electronic Components Standards Policy Committee (ECL/-) to Technical Committ
4、eeECL/11, upon which the following bodies were represented: British Telecommunications plc EEA (the Electronics and Business Equipment Association) Electronic Components Industry Federation Institution of Electrical Engineers Ministry of Defence National Supervising Inspectorate Society of British A
5、erospace Companies Limited Telecommunication Engineering and Manufacturing Association Amendments issued since publication Amd. No. Date of issue Comments 9619 October1997 Adoption as a European StandardBSEN168101:1997 BSI 03-2000 i Contents Page Committees responsible Inside front cover National fo
6、reword ii Foreword 2 Text of EN168101 3 Publications referred to Inside back coverBSEN168101:1997 ii BSI 03-2000 National foreword This BritishStandard has been prepared by Technical CommitteeEPL/49 and is the English language version of EN168101:1992 Harmonized system of quality assessment for elec
7、tronic components Blank detail specification: Quartz crystal units (Capability approval), published by the European Committee for Electrotechnical Standardization (CENELEC) Electronic Components Committee (CECC). Cross-references The BritishStandards which implement international or European publica
8、tions referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provision
9、s of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN title page, page
10、s2 to8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN168101 May1992 UDC: Descriptors: Qu
11、ality, electronic components, quartz crystal units English version Blank Detail Specification: Quartz crystal units (Capability approval) Spcification Particulire Cadre: Rsonateurs quartz (Agrment de savoir-faire) Vordruck fr Bauartspezifikation: Schwingquarze (Befhigungsanerkennung) This European S
12、tandard was approved by the CENELEC Electronic Components Committee (CECC) on14January1992. The text of this standard consists of the text of CECC68101 Issue1 (with erratum)1989 of the corresponding CECC Specification. CENELEC members are bound to comply with CEN/CENELEC Internal Regulations which s
13、tipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the General Secretariat of the CECC or to any CENELEC member. This
14、European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CECC General Secretariat has the same status as the official versions. CENELEC mem
15、bers are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and UnitedKingdom. The membership of the CECC is identical, with the exception of the nati
16、onal electrotechnical committees of Greece, Iceland and Luxembourg. CECC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1992 Copyright re
17、served to CENELEC members Ref.No.EN168101:1992EEN168101:1992 BSI 03-2000 2 Foreword The CENELEC Electronic Components Committee (CECC) is composed of those member countries of the European Committee for Electrotechnical Standardization (CENELEC) who wish to take part in a harmonized System for elect
18、ronic components of assessed quality. The object of the System is to facilitate international trade by the harmonization of the specifications and quality assessment procedures for electronic components, and by the grant of an internationally recognized Mark, or Certificate, of Conformity. The compo
19、nents produced under the System are thereby acceptable in all member countries without further testing. This specification has been formally approved by the CECC, and has been prepared for those countries taking part in the System who wish to issue national harmonized specifications for QUARTZ CRYST
20、AL UNITS. It should be read in conjunction with the current regulations for the CECC System. At the date of printing of this document the member countries of the CECC are, Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Italy, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerla
21、nd and the UnitedKingdom, and copies of it can be obtained from the addressees shown on the blue fly sheet. Preface This blank detail specification was prepared by CECC Working Group17: Piezoelectric devices for frequency control and selection. It is based, wherever possible, on the Publications of
22、the International Electrotechnical Commission and in particular on IEC Publication122-1: Quartz crystal units for frequency control and selection Part1:Standard values and test conditions. The text of this blank detail specification was circulated to the CECC for voting in the documents listed below
23、 and was ratified by the President of the CECC for publication as a CECC Specification. NOTEThis specification is published initially in French and English. The German text will follow as soon as it has been prepared. Contents Page Foreword 2 1 Ratings 4 2 Characteristics 4 3 Related documents 5 4 M
24、arking 5 5 Ordering information 5 6 Certified test records 5 7 Additional information (not for inspection purposes) 5 8 Inspection requirements 5 Annex A Example front page layout for customer detail specifications not for publication 7 Table 1 6 Document Voting Report on the Voting CECC (Secretaria
25、t)2189 May1988 CECC (Secretariat)2313EN168101:1992 BSI 03-2000 3 Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for the minimum content of detail specifications. The front page layout shown on page4 is appl
26、icable to detail specifications for standard catalogue items only. For custom-built quartz crystal units where the detail specification is not intended for publication, a suggested layout for the front page is given in Annex A. This is not mandatory, but it is recommended that the layout should be f
27、ollowed whenever possible. Key for page 4 The numbers between the square brackets on page4 correspond to the following information which should be given in the appropriate boxes. 1 The name of the National Standards Organization under whose authority the detail specification is published and, if app
28、licable, the organization from whom the detail specification is available. 2 The CECC Symbol and the number allotted to the detail specification by the CECC General Secretariat. 3 The number and issue number of the CECC generic or sectional specification as relevant; also national reference if diffe
29、rent. 4 If different from the CECC number, the national number of the detail specification, date of issue and any further information required by the national system, together with any amendment numbers. 5 A brief description of the quartz crystal unit or range of quartz crystal units. (For example
30、frequency, order, cut, mode) 6 Information on typical construction (where applicable). (For example resistance welded, cold welded). For 5 and 6 the text to be given in the detail specification should be suitable for an entry in CECC00200 (QPL) and CECC00300 (Library List). 7 An outline drawing with
31、 main dimensions which are of importance for interchangeability and/or reference to the appropriate national or international document for outlines. Alternatively, this drawing may be given in an Annex to the detail specification.EN168101:1992 4 BSI 03-2000 1 Ratings (see 2.4 of CECC68000 for prefer
32、red ratings) Operating temperature range Circuit condition Drive level Climatic category Mechanical test severities 2 Characteristics (see 2.3 of CECC68000) Nominal frequency/range Reference temperature Frequency tolerance(s) Maximum resonance resistance In addition other characteristics including t
33、he following may be stated Maximum shunt capacitance Frequency pulling range or motional parameters Unwanted responses Ageing rate Drive level dependency NOTEInformation on the above characteristics may be given in tabular form if necessary. Specification available from: 1 2 CECC68101-XXX Page1 of .
34、 ELECTRONIC COMPONENTS OF ASSESSED QUALITY BY CAPABILITY APPROVAL IN ACCORDANCE WITH: 3 4 Outline and dimensions (firstangle projection): 7 QUARTZ CRYSTAL UNITS 5 ENCLOSURE 6 Dimensions in mm Information about manufacturers who have components qualified to this detail specification is available in t
35、he current CECC00200: Qualified Products List.EN168101:1992 BSI 03-2000 5 3 Related documents 4 Marking The marking of the quartz crystal unit and the primary package shall be in accordance with the requirements of2.5 of CECC68000. Full details shall be given in the detail specification. 5 Ordering
36、information The following ordering information shall be specified: 1) Quantity 2) CECC or customer detail specification number, issue number and date and where applicable 3) Nominal frequency expressed in kHz or MHz and overtone order 4) Enclosure type 5) Frequency tolerance(s) and operating tempera
37、ture range 6) Circuit condition 7) Full description of any additional requirements. 6 Certified test records The detail specification shall state whether certified test records are required/not required in accordance with3.11 of CECC68000. 7 Additional information (not for inspection purposes) The d
38、etail specification may include information (which is not normally required to be verified by the inspection procedure) such as circuit diagrams, curves, drawings and notes for the clarification of the detail specification. 8 Inspection requirements Clause numbers of tests and performance requiremen
39、ts refer to CECC68000 The ILs and AQLs given in Table 1 are selected from IEC410 In this table The manufacturer and his customer shall ensure that any quality aspects of the quartz crystal unit to be supplied that are not covered by the maintenance of the capability approval programme are included i
40、n the detail specification. This blank detail specification does not include any periodic tests as these are controlled by the CQC testing under the maintenance of the capability approval as defined in3.11 and3.12 of CECC68100. Generic specification CECC68000 Sectional specification CECC68100 D = de
41、structive ND = non-destructive IL = inspection level AQL = acceptable quality levelEN168101:1992 6 BSI 03-2000 Table 1 Clause number and test D or ND Conditions of test IL AQL % Performance requirements 100% Inspection ND 4.5.1 4.7.1 Visual test A Frequency and resonance resistance 4.5.1 4.7.1 4.5.1
42、 Frequency tolerance and maximum resonance resistance Group A Inspection To be conducted on a sampling basis, lot-by-lot Sub-Group A1 ND II 1,5 4.7.9 Insulation resistance 4.7.9 4.7.9 Sub-Group A2 ND I 1,5 4.7.3 4.7.3 Test A Frequency and resonance resistance as a function of temperature Test B Freq
43、uency and resonance resistance as a function of temperature 4.7.3 test A. 4.7.3 test B. Frequency tolerance and/or variation and maximum resonance resistance 4.7.3 test B Group B Inspection To be conducted on a sampling basis, lot-by-lot Sub-Group B1 ND S-4 4,0 4.6.1 Dimensions Test A 4.6.1 4.6.1 Su
44、b-Group B2 4.8.2(2) 4.8.2(1) 4.8.2(3) Fine line test (except for evacuated glass enclosures) Gross leak test (except for evacuated glass enclosures) Vacuum test for evacuated crystal units (for glass enclosures only) 4.8.2(2) 4.8.2(1) 4.8.2(3) 2.4.11 4.8.2(1) 4.8.2(3)EN168101:1992 BSI 03-2000 7 Anne
45、x A Example front page layout for customer detail specifications not for publication 1 Ratings (see 2.4 of CECC68000 for preferred ratings) Operating temperature range Circuit condition Drive level Climatic category Mechanical test severities Customer: Specification reference Issue Number Manufactur
46、er: Date Page1 of ELECTRONIC COMPONENTS OF ASSESSED QUALITYBY CAPABILITY APPROVAL IN ACCORDANCE WITH: 3 Manufacturers type number Outline and dimensions (firstangle projection): 7 QUARTZ CRYSTAL UNITS 5 ENCLOSURE 6 Dimensions in mm8 blankBSEN168101:1997 BSI 03-2000 Publications referred to See natio
47、nal foreword.BS EN 168101:1997 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.
48、Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or
49、ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1