BS EN 175101-809-2004 Harmonized system of quality assessment for electronic components - Detail specification - Two-part connectors for printed boards having a grid of 2 54 mm shot.pdf

1、BRITISH STANDARD BS EN 175101-809: 2004 Harmonized system of quality assessment for electronic components Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality The European Standard EN 175101-809

2、:2004 has the status of a British Standard ICS 31.220.10 BS EN 175101-809:2004 This British Standard was published under the authority of the Standards Policy and Strategy Com mittee on 27 April 2004 BSI 27 April 2004 ISBN 0 580 43667 5 National foreword This British Standard is the official English

3、 language version of EN 175101-809:2004. It supersedes BS EN 175101-809:2000 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment, to Subcommittee EPL/48/2, Connectors

4、for electronic equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in

5、the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsibl

6、e for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK

7、 interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 39 and a back cover. The BSI copyright notice displayed in this document indicates

8、when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 175101-809 NORME EUROPENNE EUROPISCHE NORM March 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee

9、fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 175101-809:2004 E ICS 31.220.10 Supersedes EN 175101-809:1999English version Detail speci

10、fication: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality Spcification particulire: Connecteurs en deux parties pour circuits imprims sur une grille de base de 2,54 mm, version simplifie en conformit avec la CEC

11、C 75 101-801, pour lassurance de la qualit Bauartspezifikation: Indirekte Steckverbinder fr gedruckte Schaltungen, Raster 2,54 mm, kurze Ausfhrung entsprechend CECC 75 101-801 mit bewerteter QualittThis European Standard was approved by CENELEC on 2004-02-01. CENELEC members are bound to comply with

12、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretaria

13、t or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the of

14、ficial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slov

15、enia, Spain, Sweden, Switzerland and United Kingdom. EN 175101-809:2004 - 2 - Foreword This European Standard was prepared by Reporting Secretariat 48B (former CLC/TC 48B, LF connectors). The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 175101-

16、809 on 2004-02-01. This European Standard supersedes EN 175101-809:1999. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-02-01 - latest date by which the national stand

17、ards conflicting with the EN have to be withdrawn (dow) 2007-02-01 _ Page2 EN175101809:2004 - 3 - EN 175101-809:2004 Contents Page 1 Scope.4 2 Normative references.4 3 Style designation6 4 Common features.7 4.1 Mounting dimensions .7 4.2 Mating information 10 4.3 Survey of styles. 10 5 Dimensions .1

18、0 5.1 General 10 5.2 Fixed board connector 11 5.3 Free board connector 17 5.4 Mating information 21 5.5 Accessories (for information only). 21 5.6 Mounting information of fixed board connectors. 21 5.7 Mounting information for free board connectors . 22 6 Gauges 22 7 Characteristics .23 7.1 Climatic

19、 category.23 7.2 Electrical 23 7.3 Mechanical 25 8 Test schedule .25 8.1 General . 25 8.2 Test schedule tables . 28 9 Quality assessment procedures.36 9.1 Qualification approval testing 36 9.2 Quality conformance inspection 37 9.3 Delayed delivery, re-inspection. 39 10 Ordering information .39 Page3

20、 EN175101809:2004EN 175101-809:2004 - 4 - 1 Scope This European Standard applies to two-part connector for printed boards with a basic grid of 2,54 mm, common mounting features and 16 to 48 contacts. A standard style with angled male contacts in the free connector and straight female contacts in the

21、 fixed connector and a reversed style with angled female contacts in the free connector and straight male contacts in the fixed connector. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of p

22、ublication, the edition indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain reg

23、isters of currently valid International Standards. IEC 60068-1:1988, Environmental testing - Part 1: General and guidance IEC 60097:1991; Grid systems for printed circuits IEC 60194:1999, Printed board design, manufacture and assembly - Terms and definitions IEC 60326-3:1991, Printed boards - Part 3

24、: Design and use of printed boards IEC 60352-1:1997, Solderless connections - Part 1: Solderless wrapped connections, General requirements, tests methods and practical guidance IEC 60352-5:2001, Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical

25、guidance IEC 60410:1973, Sampling plans and procedures for inspection by attributes IEC 60512-1:2001, Connectors for electronic equipment - Tests and measurements - Part 1: General IEC 60512-1-1:2002, Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test

26、 1a: Visual examination IEC 60512-1-2:2002, Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass IEC 60512-2:1985, Part 2: General examination, electrical continuity and contact resistance tests, insulation tests an

27、d voltage stress tests IEC 60512-2-1:2002, Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method IEC 60512-2-5:2003, Connectors for electronic equipment - Tests and measuremen

28、ts - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance IEC 60512-3-1:2002, Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance IEC 60512-4-1:2003, Connectors for electronic equipment : Te

29、sts and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof IEC 60512-4-2:2002, Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge IEC 60512-5:1992, Electromechanical components for electronic equipment; basic

30、 testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests IEC 60512-6:1984, Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 6: Climatic test

31、s and soldering tests IEC 60512-6-1:2002, Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state Page4 EN175101809:2004 - 5 - EN 175101-809:2004 IEC 60512-6-3:2002, Connectors for electronic equipment - Tests and measuremen

32、ts - Part 6-3: Dynamic stress tests - Test 6c: Shock IEC 60512-6-4:2002, Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) IEC 60512-7:1993, Electromechanical components for electronic equipment; basic testing procedures a

33、nd measuring methods - Part 7: Mechanical operating tests and sealing tests IEC 60512-8:1993, Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations IEC 60512-9:199

34、2, Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests IEC 60512-11-1:1995, Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Te

35、st 11a - Climatic sequence IEC 60512-11-3:2002, Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state IEC 60512-11-4:2002, Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid

36、 change of temperature IEC 60512-11-5:2002, Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth IEC 60512-11-8:1995, Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climati

37、c tests - Section 8: Test 11h - Sand and dust IEC 60512-11-9:2002, Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat IEC 60512-11-10:2002, Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j:

38、 Cold IEC 60512-11-11:2002, Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure IEC 60512-11-12:2002, Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic IEC 60512-1

39、1-14:2003, Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 14: Test 11p: Flowing single gas corrosion test IEC 60603-1:1991, Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic

40、 specification - General requirements and guide for the preparation of detail specifications, with assessed quality IEC 60603-1-am1:1992, Amendment No. 1 IEC 60603-2: 1995, Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with

41、assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features IEC 61076-1:1995, Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification IEC 61076-4:1995, Connectors

42、with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors ISO 272:1982, Fasteners - Hexagon products - Widths across flats ISO 468:1982, Surface roughness Parameters, their values and genera

43、l rules for specifying requirements IEC QC 001002:1986, Rules of procedure of the IEC Quality Assessment System for Electronic Components (IECQ); Amendment 2: 1994 Page5 EN175101809:2004EN 175101-809:2004 - 6 - 3 Style designation Connectors according to this specification shall be designated by the

44、 following system: , NOTE “L“ stands for letter “N“ stands for number Example: Connector style C, having 48 gold plated male contacts with solder terminals. Complete board- mounted connector for boards up to 1,6mm, with performance level 2 and assessment level G: CECC 75101-809-C048MS-1C1-2G. Refere

45、nce to this specification CECC 75101-809 L N N N L L N L N N L Letter denoting the style of connector For details see 4.3 and 5 B C Q R Number of contacts For details see 4.3 and 5 016 032 048 Letter denoting style of contact Two-part connector male female M F Letter denoting basic style and number

46、denoting application of termination Solder Compliant Press-in Wrapped connection Press-in and wrapped conn. Press-in with wrapped conn. and rear side mating Not applicable Solder termination for board thickness up to 1,6 mm Solder termination for board thickness up to 2,4 mm Termination for press-in

47、 connection with post length 5,5 mm Termination for press-in connection with post length 13 mm Termination for press-in connection with post length 17 mm Termination for press-in connection with post length 20 mm S P W U R 0 1 2 3 4 5 6 Letter denoting assessment level B G Assessment level B Assessm

48、ent level G Number denoting performance level PL 1 2 Performance level PL 1 Performance level PL 2 3 Performance level PL 3 Number denoting contact finish 1 2 Gold, gold alloy Silver, silver alloy 3 Palladium, Pd-alloy with gold flash Letter to distinguish connector and contacts C Complete connector

49、 Page6 EN175101809:2004 - 7 - EN 175101-809:2004 4 Common features 4.1 Mounting dimensions 4.1.1 Reference system A line in the mounting plane of the fixed connector and passing through the position of the centres of the mounting holes is used as a datum line. The nominal centre of the mounting hole near contact No. 16 is used as datum point. With reference to this datum system, the dimensions in 4.1.2 and 4.1.3 are defined. 4.1.2 Fixed board connector 4.1.2.1