BS EN 50049-1-1998 Domestic and similar electronic equipment interconnection requirements - Peritelevision connector《家用及类似用途电子设备互连要求 辅助电视连接器》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 50049-1:1998 BS 655

2、2:1998 Incorporating Amendment No. 1 The European Standard EN 50049-1:1997 with the incorporation of amendment A1:1998 has the status of a British Standard ICS 31.220.10; 33.160.40 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Domestic and similar electronic equipment interc

3、onnection requirements: Peritelevision connectorThis British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 June 1998 BSI 02-2000 ISBN 0 580 29860 4 BS EN 50049-1:1998 Amend

4、ments issued since publication Amd. No. Date Comments 10412 February 2000 Indicated by a sideline | | National foreword This British Standard is the English language version of EN 50049-1:1997 including amendment A1:1998. It supersedes BS 6552:1990 which was withdrawn on 98-06-01. The UK participati

5、on in its preparation was entrusted by Technical Committee EPL/100, Audio, video and multimedia systems and equipment, to Subcommittee EPL/100/3, Equipment and systems in the field of audio, video and audiovisual engineering, which has the responsibility to: aid enquirers to understand the text; pre

6、sent to the responsible European Subcommittee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtai

7、ned on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” fa

8、cility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obli

9、gations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 16, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Sidelining in this document indicates the

10、most recent changes by amendment.CENELEC European Committee for Electrotechnical Standardization Comite Europe en de Normalisation Electrotechnique Europa isches Komitee fu r Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1997 CENELEC All rights of exploitation in

11、 any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50049-1:1997+A1:1998 E EUROPEAN STANDARD EN 50049-1 NORME EUROPE ENNE November 1997 EUROPA ISCHE NORM +A 1 August 1998 ICS 33.160.40 Supersedes EN 50049-1:1989 and its amendments Descriptors: Communication equipment, elec

12、tronic equipment, household electrical appliance, television set, appliances interconnection, data terminal equipment, peritelevision devices, designation, electrical characteristics, mechanical characteristics, dimensions, sockets, electrical connector, screen (display), peritelevision system, vide

13、ography English version Domestic and similar electronic equipment interconnection requirements: Peritelevision connector (includes amendment A1:1998) Prescriptions dinterconnexion des appareils e lectroniques grand public et analogues: Connecteur de pe rite le vision (inclut lamendement A1:1998) Ken

14、nwerte fu r die Kleinsignalverbindung zwischen elektronischen Gera ten fu r den Heimgebrauch und a hnliche Anwendungen: Peritelevision Verbindung (entha lt A nderung A1:1998) This European Standard was approved by CENELEC on 1997-07-01. CENELEC members are bound to comply with the CEN/CENELEC Intern

15、al Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC mem

16、ber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELE

17、C members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 50049-1:1997 BSI 02-2000 Foreword This Eu

18、ropean Standard was prepared by Technical Committee CENELEC TC 203, Electronic entertainment and educational systems for household and similar use. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50049-1 on 1997-07-01. This European Standard supersedes EN 500

19、49-1:1989, which was approved by CENELEC on 1988-09-13. Since this date the evolution of services is such that several amendments were approved. Also the application implies the introduction in the European Standard of some general rules independent of the interconnection architecture. Due to this a

20、 new edition has become necessary. Significant technical differences are: a) addition: contents of amendments A1, A2, A3, A4 b) deletion: connector characteristics which are contained in IEC 60807-9. c) addition: clause 6 Essential/optional signal types for various applications. The following dates

21、were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1998-06-01 latest date by which national standards conflicting with the EN have to be withdrawn (dow) 1998-06-01 Foreword to amendment A1 This amen

22、dment was prepared by the former Technical Committee CENELEC TC 203, Electronic entertainment and educational systems for household and similar use (in July 1998 TC 203 has become part of TC 206, Consumer equipment for entertainment and information and related sub-systems). The text of the draft (pr

23、AA) was submitted to the formal vote and was approved by CENELEC as amendment A1 to EN 50049-1:1997 on 1998-08-01. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1999-

24、08-01 latest date by which national standards conflicting with the amendment have to be withdrawn (dow) 1999-08-01Page 3 EN 50049-1:1997 BSI 02-2000 1 Introduction 1.1 Object This standard defines the interconnection characteristics of peritelevision devices, both between themselves and with televis

25、ion receivers (monochrome or colour). The interconnections covered by this standard are at baseband (video and audio) or digital signals. For the purpose of defining conformance, this standard specifies the types and related groups of signals, composite video, audio, primary colour and control that

26、shall be present on the connectors. The levels and impedances together with the tolerances on these values are also specified. The manner in which the signals on the connector are processed within the products incorporating the connectors and the presentation of the results of such processing to the

27、 user is outside the scope of this standard. These details depend upon the system involved, e.g. PAL or SECAM and the specification of the product. This standard lays down collectively the electrical matching characteristics (type of signals, voltage and impedance values), dimensional, mechanical an

28、d electrical characteristics of the connectors, type and wiring of interconnection cordsets. Attention is drawn to the fact that the interconnection covered by this standard shall in any circumstances meet the safety requirements specified in EN 60065:1993 and the electromagnetic compatibility requi

29、rements specified in the appropriate publications. 1.2 Field of application This standard applies to the connector socket mounted on various devices that are components of domestic audio-visual systems, and includes the designation of contacts, the type of interchanged signals and the matching value

30、s of voltage and impedance. This standard does not apply to equipment so small that its size is not compatible with the dimensions of the socket. It applies also to the plug fitted to the end of interconnection cordsets. It covers the interconnection cordsets themselves (type of conductors, wiring).

31、 Permanent connection of several pieces of equipment which may be used simultaneously or otherwise is ensured: either by fitting each piece of equipment with a suitable number of connectors; or by a single connector on each piece of equipment linked to a central interconnection and switching device.

32、 The user shall be informed about the possible applications that are provided by a device. 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the

33、 publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (includ

34、ing amendments). EN 60065, Safety requirements for mains operated electronic and related apparatus for household and similar general use. (IEC 60065, modified) IEC 60268-15, Sound system equipment Part 15: Preferred matching values for the interconnection of sound system components. (harmonized as H

35、D 483.15 S4:1992) IEC 60608, Interconnections between video-tape recorders and television receivers for 50 Hz-625 lines. NOTE IEC 60608 is restricted to a specific system, whereas this standard relates to an interconnection system intended to cover a substantially wider scope. Thus in particular, th

36、e interconnection as defined in IEC 60608 does not provide for simultaneous conveyance, on separate pins, of receiver input and output (audio and video) signals in order to be processed by a peripheral device. IEC 60807-9, Rectangular connectors for frequencies below 3 MHz Part 9: Detail specificati

37、on for a range of peritelevision connectors. IEC 60933-1, 21 pin-connector for video systems (Application No. 1 and Amendment 1). Recommendation ITU-R draft (11 A/XE Enhanced wide-screen PAL TV transmission system). 3 Characteristics of the interconnections (See Table 1) General remarks: All input a

38、nd output signals may be present simultaneously. All input and output signals are defined and measured taking into account the appropriate CCIR and IEC Publications. BSI 02-2000 Page 4 EN 50049-1:1997 Table 1 Signal designation Matching value Contact number Test conditions and comments audio output

39、A 1) 300V#impedance# 1kV 2) Voltage (r.m.s. value) 3 Load impedance for compliance testing: 10 kV mono stereo channel left independent channel A nominal 0,5 V * 3d B maximum 5,65 V pp *for a modulation factor by a sinusoidal signal at 1 kHz at the transmitter of 54 % in A.M and F.M. type of modulati

40、on with a vision carrier level of 70 dB (mV). for a level at the transmitter corresponding in digital system to: 211,2 dB FS for the NICAM B G and L 215,8 dB FS for the NICAM I 211,2 dB FS for the D2 MAC Note FS = Full Scale If a MAC coded signal is present at pin 19 the connected equipment shall ig

41、nore the signal at this contact Superimposed d.c. component within 0 V and + 1 V AUDIO output B 1) 1 mono stereo channel right independent channel B AUDIO input A 1) Impedance$ 10 kV 2) 6 Source impedance for compliance testing: 1 kV Electromotive force (r.m.s. value) mono stereo channel left indepe

42、ndent channel A nominal 0,5 V minimum 0,2 V* maximum 5,65 V pp *for a nominal output value according to the equipment specifications AUDIO input B 1) 2 mono stereo channel right independent channel B Superimposed d.c. component within 0 V and + 1 V AUDIO common return 4Page 5 EN 50049-1:1997 BSI 02-

43、2000 Table 1 (continued) Signal designation Matching value Contact number Test conditions and comments VIDEO output Impedance: 75V 4) 19 Composite video signal or Y99: Difference between white level and synchronizing level: 1 V ( 3 dB) 3) Positive going Video Y99 signal is the blanked luminance sign

44、al plus the synchronization signal plus data signals (when present). In case of satellite reception the residual energy dispersal signal component shall be# 17 mV. p.t.p. When the signal on this terminal is exclusively a synchronization signal, the peak to peak voltage is 0,3 V (23 dB, +10 dB) Negat

45、ive going signal MAC signal: The amplitude between black level and white level is 1 V ( 3 dB) and if the superimposed energy dispersal is present, it can cause an additional amplitude of maximum 0,3 V pp If the equipment is designed to deliver a MAC coded signal, the MAC signal at this contact shall

46、 be free of linear pre-emphasis in case of satellite reception, but it may or may not contain the energy dispersal signal. In both cases: Superimposed d.c. component within 0 V and +2 V VIDEO output return 17 VIDEO input Impedance: 75V 4) Positive going Video Composite video signal or Y99: Differenc

47、e between white level and synchronizing level 1 V ( 3 dB) 3) 20 Y99 signal is the blanked luminance signal plus the synchronization signal plus data signals (when present). In case of satellite reception the residual energy dispersal signal component shall be# 17 mV. p.t.p. When the signal on this t

48、erminal is exclusively a synchronization signal, the peak to peak voltage is 0,3 V (23 dB, +10 dB) Negative going signal BSI 02-2000 Page 6 EN 50049-1:1997 Table 1 (continued) Signal designation Matching value Contact number Test conditions and comments MAC signal: The amplitude between black level

49、and white level is 1 V ( 3 dB) and if the superimposed energy dispersal is present, it can cause an amplitude contribution of maximum 0,3 V If the equipment is designed to receive a MAC coded signal, the MAC signal at this contact shall be free of linear pre-emphasis in case of satellite reception, but it may or may not contain the energy dispersal signal. In both cases: Superimposed d.c. component within 0 V and +2 V VIDEO input return 18 FUNCTION SWITCHING 6) (slow switching) Input or output Level 0: 0 V to +2 V