BS EN 50065-4-4-2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148 5 kHz - Low voltage decoupling filters - Impedance filter《频率范围为3kHz至148 .pdf

1、BRITISH STANDARD BS EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter Impedance filter The European Standard EN 50065-4-4:2003 has the status of a British Standard ICS 31.160; 30.040.30; 97.120 BS EN

2、 50065-4-4:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 15 April 2003 BSI 15 April 2003 ISBN 0 580 40148 0 National foreword This British Standard is the official English language version of EN 50065-4-4:2003. The UK participation in

3、its preparation was entrusted to Technical Committee PEL/205, Mains signalling, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publica

4、tions referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the neces

5、sary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the inter

6、pretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a ba

7、ck cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 50065-4-4 NORME EUROPENNE EUROPISCHE NORM January 2003 CENELEC European Committee for Electrotechnical Standardizati

8、on Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50065-4-4:2003 E I

9、CS 31.160; 33.040.30; 97.120 English version Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter Transmission de signaux sur les rseaux lectriques basse tension dans la bande de frquences de 3 kHz 148

10、,5 kHz Partie 4-4: Filtres basse tension de dcouplage - Filtre dimpdance Signalbertragung auf elektrischen Niederspannungsnetzen im Frequenzbereich 3 kHz bis 148,5 kHz Teil 4-4: Niederspannungs- Entkopplungsfilter - Impedanzfilter This European Standard was approved by CENELEC on 2002-04-01. CENELEC

11、 members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appl

12、ication to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretar

13、iat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden,

14、Switzerland and United Kingdom. EN 50065-4-4:2003 - 2 - Foreword This European Standard was prepared by SC 205A, Mains communicating systems, of Technical Committee CENELEC TC 205, Home and Building Electronic Systems (HBES). The text of the draft was submitted to the Unique Acceptance Procedure and

15、 was approved by CENELEC as EN 50065-4-4 on 2002-04-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-08-01 - latest date by which the national standards conflicting

16、with the EN have to be withdrawn (dow) 2005-04-01 EN 50065 consists of the following parts, under the general title: Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 1 General requirements, frequency bands and electromagnetic disturbances Part 2-1 Imm

17、unity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments Part 2-2 Immunity requirements for mains communications equipment and systems operating in the

18、 range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments Part 2-3 Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors Part 4-1 Low vo

19、ltage decoupling filters Generic specification Part 4-2 Low voltage decoupling filters Safety requirements Part 4-3 Low voltage decoupling filters Incoming filter Part 4-4 Low voltage decoupling filters Impedance filter Part 4-5 Low voltage decoupling filters Segmentation filter Part 4-6 Low voltage

20、 decoupling filters Phase coupler Part 7 Equipment impedance _ - 3 - EN 50065-4-4:2003 Contents Page 1 Scope.4 2 Normative references.4 3 Impedance filter electrical characteristics.5 3.1 Overvoltage.5 3.2 EMC .5 4 Filter impedance characteristics 5 4.1 Terminations.5 4.2 Operating frequency range .

21、5 4.3 Impedance6 4.4 Transfer function.6 4.5 Safety6 Figure 1 - The application of impedance filters .4 EN 50065-4-4:2003 - 4 - 1 Scope This standard applies to impedance filters in a mains communication system for phase to neutral voltage not exceeding 250 V a.c. and a nominal current not exceeding

22、 125 A, intended for household and similar fixed installation including residential, commercial and light industrial buildings. This standard also applies to “plug-in filters“. These filters (see Figure 1) are used to set a suitable impedance, in the nominal frequency range of the mains signalling s

23、ystem, at any point of the low voltage mains network where a low impedance equipment is connected, in order to allow reliable operation of mains signalling system. These impedance filters can be used either in utility or consumer networks. They may also be used in conjunction with incoming filters a

24、nd segmentation filters. impedance filter low impedance equipment low voltage network network terminals equipment terminalsFigure 1 - The application of impedance filters 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. The

25、se normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undat

26、ed references the latest edition of the publication referred to applies (including amendments). EN 50065-2-1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-1: Immunity requirements for mains communications equipment and systems operating in the ra

27、nge of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments EN 50065-2-2 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-2: Immunity requirements for mains communications equipment and sy

28、stems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments EN 50065-2-3 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-3: Immunity requirements for mains communications equipment and systems ope

29、rating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors - 5 - EN 50065-4-4:2003 EN 50065-4-1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-1: Low voltage decoupling filters - Generic speci

30、fication EN 50065-4-2 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-2: Low voltage decoupling filters - Safety requirements HD 625.1 Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests (IEC

31、60664-1, mod.) EN 61000-4-5 Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques - Surge immunity test (IEC 61000-4-5) EN 61000-4-14 Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test (IEC 61000-4-14) 3 Im

32、pedance filter electrical characteristics The filter shall meet the requirements given in EN 50065-4-1 and EN 50065-4-2. 3.1 Overvoltage Requirements in accordance with 7.1.5 of EN 50065-4-2: - category III for filters used on the consumer network; - category IV for filters used on the utility netwo

33、rk. 3.2 EMC According to EN 50065-2-1 for consumer side in residential, commercial and light industrial environments. According to EN 50065-2-2 for consumer side in industrial environments. According to EN 50065-2-3 for utility side. 4 Filter impedance characteristics 4.1 Terminations The impedance

34、filter shall have a network port connected to the mains communication network and an equipment port connected to either a low impedance equipment or a low impedance network. Implementation of impedance filter may not distinguish both ports when designed symmetrically. 4.2 Operating frequency range T

35、he operating frequency range is a (reduced) frequency range the filter is designed for. It shall be in the frequency band 3 kHz to 95 kHz for the utility network, It shall be in the frequency band 95 kHz to 148,5 kHz for the consumer network. EN 50065-4-4:2003 - 6 - 4.3 Impedance At the network port

36、 when measured in the operating frequency range in accordance with 6.1 of EN 50065-4-1, the filter shall have a minimum impedance modulus value of 10 . At the equipment port there is no impedance requirement. NOTE When used in conjunction with an incoming filter type 3 (at the utility side), the com

37、bined filter shall fulfil the requirements of 4.4 of the incoming filter standard EN 50065-4-3, measured in accordance with 6.1 of EN 50065-4-1. 4.4 Transfer function The function of the impedance filter is only to optimise the impedance of the mains network and consequently there is no need to defi

38、ne a transfer function. 4.5 Safety The filter shall meet the requirements given in EN 50065-4-1 and EN 50065-4-2. blankBS EN 50065-4-4:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It

39、presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim o

40、f BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)

41、20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Cu

42、stomer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as Briti

43、sh Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give det

44、ails on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of

45、these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on th

46、e BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored

47、in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.