BS EN 50106-2008 Safety of household and similar nelectrical appliances — Particular nrules for routine tests referring to nappliances under the scope of EN n60335-1《家用和类似用途电器的安全性 .pdf

1、Safety of household and similarelectrical appliances Particularrules for routine tests referring toappliances under the scope of EN60335-1 BS EN 50106:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsLicensed Copy: Wang Bin, IS

2、O/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 50106:2008. It super-sedes BS EN 50106:1997, which will be withdrawn on 1 June 2011.The UK participation in its preparation was entrusted to Technical Committ

3、eeCPL/61, Safety of household and similar electrical appliances.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application.C

4、ompliance with a British Standard cannot confer immunity fromlegal obligations. BSI 2009SBN 978 0 580 61272 5ICS 97.030Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 50106:2008This British Standard was published under the authority of the StandardsPolicy and Stra

5、tegy Committee on 31 January 2009. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 50106 NORME EUROPENNE EUROPISCHE NORM October 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation

6、 Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50106:2008 E ICS 97.030 Supersedes EN 50106:1997 +

7、A1:1998 + A2:2001English version Safety of household and similar electrical appliances - Particular rules for routine tests referring to appliances under the scope of EN 60335-1 Scurit des appareils lectrodomestiques et analogues - Rgles particulires pour les essais de srie concernant les appareils

8、dans le domaine dapplication de la EN 60335-1 Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke - Besondere Regeln fr Stckprfungen von Gerten im Anwendungsbereich der EN 60335-1 This European Standard was approved by CENELEC on 2008-06-01. CENELEC members are bound to comply with

9、the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat

10、 or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the off

11、icial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portuga

12、l, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50106:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSIEN 50106:2008 2 Foreword This European Standard was prepared by the Technical Committee CENELEC TC 61,

13、 Safety of household and similar electrical appliances. During the Brughes meeting of CENELEC TC 61 in June 2005, document 61(SEC)1506 was discussed and it was decided to prepare a new edition of EN 50106 and send it to the voting procedure. Two additional proposals, documents 61(BE)0003/NP and 61(D

14、E)0587/NP, were discussed during the Brussels meeting in November 2005, where it was decided to include them in prEN 50106. Another proposal, document 61(DE)0588/NP, was included as a result of the Malaga meeting in June 2006. The text of the draft was submitted to the Unique Acceptance Procedure an

15、d was approved by CENELEC as EN 50106 on 2008-06-01. This European Standard supersedes EN 50106:1997 + A1:1998 + A2:2001. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-

16、06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-06-01 _ BS EN 50106:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSI 3 EN 50106:2008 Introduction The tests detailed in this standard are c

17、arried out by the manufacturer and apply to products within the scope of EN 60335-1. These tests are intended to reveal a variation during the manufacture of appliances which could impair safety. They do not impair the properties and the reliability of the appliance and are to be carried out on each

18、 appliance. They are normally carried out on the complete appliance after assembly but the manufacturer may perform the tests at an appropriate stage during production, provided later manufacturing operations would not affect the results. NOTE Components are not subjected to these routine tests if t

19、hey have been previously checked by suitable routine tests. The manufacturer may use a test procedure which is better suited to his production arrangements provided that appliances which withstand those tests have at least the same degree of safety as appliances that withstand the tests specified in

20、 this standard. The routine tests listed in this standard are the minimum considered necessary to cover essential safety aspects. It is the responsibility of the manufacturer to decide if additional routine tests are necessary. It may be determined from engineering considerations that some of the te

21、sts required in this standard are impracticable or inappropriate and therefore unnecessary. If a product fails any of the tests, it is subjected to all of the tests after repair and/or adjustment. There are no additional requirements for particular appliances unless stated in the relevant standard s

22、heet of Section 2. BS EN 50106:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSIEN 50106:2008 4 SECTION 1 - GENERAL TESTS 1.1 Earth continuity test A current of at least 10 A, derived from a source having a no-load voltage not exceeding 12 V (a.c

23、. or d.c.), is passed between each of the accessible earthed metal parts and for class I appliances intended to be permanently connected to fixed wiring, the earthing terminal; for other class I appliances, the earthing pin or earthing contact of the plug; the earthing pin of the appliance inlet. Th

24、e voltage drop is measured and the resistance is calculated and shall not exceed for appliances having a supply cord, 0,2 , or 0,1 plus the resistance of the supply cord, for other appliances, 0,1 . NOTE 1 The test is only carried out for the duration necessary to enable the voltage drop to be measu

25、red. NOTE 2 Care is to be taken to ensure that the contact resistance between the tip of the measuring probe and the metal part under test does not influence the test results. 1.2 Electric strength test The insulation of the appliance is subjected to a voltage of substantially sinusoidal waveform ha

26、ving a frequency of approximately 50 Hz or 60 Hz for 1 s. The value of the test voltage and the points of application are shown in Table 1. Table 1 Test voltages Points of application Test voltage V Class I appliances and class II appliances Class III appliances Rated voltage 150 V 150 V Between liv

27、e parts and accessible metal parts separated from live parts by basic insulation only 800 1 000 400 double or reinforced insulation a2 000 2 500 a For class I appliances, this test does not need to be carried out on parts of class II construction if the test is considered to be inappropriate. NOTE 1

28、 It may be necessary for the appliance to be in operation during the test to ensure that the test voltage is applied to all relevant insulation, for example, heating elements controlled by a relay. BS EN 50106:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled

29、Copy, (c) BSI 5 EN 50106:2008 No breakdown shall occur. Breakdown is assumed to occur when the current in the test circuit exceeds 5 mA. However, this limit may be increased up to 30 mA for appliances with a high leakage current. NOTE 2 The circuit used for the test incorporates a current sensing de

30、vice that trips when the current exceeds the limit. NOTE 3 The high voltage transformer is to be capable of maintaining the specified voltage at the limiting current. NOTE 4 Instead of being subjected to an a.c. voltage, the insulation may be subjected to a d.c. voltage of 1,5 times the value shown

31、in Table 1. An a.c. voltage having a frequency up to 5 Hz is considered to be a d.c. voltage. 1.3 Functional test The correct functioning of an appliance is checked by inspection or by an appropriate test if the incorrect connection or adjustment of components has safety implications. NOTE Examples

32、are verification of the correct direction of motor rotation and the appropriate operation of interlock switches. This does not require testing of thermal controls or protective devices. BS EN 50106:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BS

33、IEN 50106:2008 6 Blank page BS EN 50106:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSI 7 EN 50106:2008 SECTION 2 - STANDARD SHEETS These standard sheets state additional routine tests for the following appliances: Sheet Appliance EN 50106-2-6

34、Stationary cooking ranges, hobs, ovens and similar appliances EN 50106-2-9 Grills, toasters and similar portable cooking appliances EN 50106-2-17 Blankets, pads, clothing and similar flexible heating appliances EN 50106-2-21 Storage water heaters EN 50106-2-25 Microwave ovens EN 50106-2-29 Battery c

35、hargers EN 50106-2-35 Instantaneous water heaters EN 50106-2-40 Electrical heat pumps, air-conditioners and dehumidifiers EN 50106-2-45 Portable heating tools and similar appliances BS EN 50106:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSIEN

36、50106:2008 8 Blank page BS EN 50106:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSIEN 50106-2-6:2008 Routine tests for stationary cooking ranges, hobs, ovens and similar appliances within the scope of EN 60335-2-6 Standard sheet 50106-2-6 This

37、sheet modifies or supplements Section 1 of EN 50106. 1.2 Electric strength test Add to the paragraph after Note 1: “and up to 100 mA if AC is used for the test.” BS EN 50106:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSIBS EN 50106:2008License

38、d Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSIEN 50106-2-9:2008 Routine tests for grills, toasters and similar portable cooking appliances within the scope of EN 60335-2-9 Standard sheet 50106-2-9 This sheet modifies or supplements Section 1 of EN 50106.

39、 1.2 Electric strength test Add to the paragraph after Note 1: “and up to 100 mA if AC is used for the test of combined microwave ovens or induction appliances.” BS EN 50106:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSIBS EN 50106:2008License

40、d Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSIEN 50106-2-17:2008 Routine tests for blankets, pads, clothing and similar flexible heating appliances within the scope of EN 60335-2-17 Standard sheet 50106-2-17 This sheet modifies or supplements Section 1 o

41、f EN 50106. 1.2 Electric strength test Addition: An additional electric strength test is carried out between live parts and accessible parts of the flexible part, other than parts operating at safety extra-low voltage. The test voltage is determined from Table 101. Table 101 Test voltages Type of te

42、st voltage Test voltage V Rated voltage 150 150 and 250 a.c. 2 000 + X 2 500 + X d.c. 3 000 + X 3 750 + X The value of X is determined as follows. The flexible part is opened and the insulation of the heating element is removed over a length of 5 mm to expose the conductor. The heating element is th

43、en reinserted into the enclosure of the flexible part. A test voltage of 1 000 V (1 500 V d.c.) is applied between the conductor and the external surface of the flexible part. The voltage is increased in steps of 500 V (750 V d.c.) until breakdown occurs. The value of X is the test voltage before br

44、eakdown occurs. NOTE 101 If the flexible part incorporates a permanent outer enclosure made of electrical insulating material such as PVC, the value of X is determined with this enclosure removed. NOTE 102 Acceptable methods of applying the test voltage are passing the flexible part between rollers;

45、 passing the flexible part on a conveyor by a metal plate; placing the flexible part between metal plates; sweeping a chain wire brush over the flexible part. 1.3 Functional test Addition: The functional test includes a check that the resistance of the heating element is within the tolerance; a chec

46、k that no current flows when the control is in the off position. NOTE 101 The tolerance selected is to ensure that the power input deviation of Clause 10 is not exceeded. BS EN 50106:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSIBS EN 50106:20

47、08Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2009 02:19, Uncontrolled Copy, (c) BSIEN 50106-2-21:2008 Routine tests for storage water heaters within the scope of EN 60335-2-21 Standard sheet 50106-2-21 This sheet modifies or supplements Section 1 of EN 50106. Addition: 2.1 Construc

48、tion The water container is subjected to a pressure test using a fluid. When a liquid is used, the pressure is for closed water heaters, 0,7 MPa for those having a rated pressure not greater than 0,6 MPa, and 1,1 times rated pressure for others; for cistern-fed water heaters and low-pressure water h

49、eaters, 1,1 times rated pressure; for open-outlet water heaters, 0,05 MPa; for cistern-type water heaters, 0,03 MPa. When gas is used, these pressures may be reduced but are to be sufficient to reveal leakage. NOTE Care should be taken when testing closed water heaters with gas. Leakage of the fluid is not to occur during the test. _ A-deviation: National deviation due to regulations, the alteration of which is for the time being outside the co