BS EN 50229-2015 Electric clothes washer-dryers for household use Methods of measuring the performance《家用电动洗衣-烘干机 性能测量方法》.pdf

1、BSI Standards PublicationElectric clothes washer-dryers for household use Methods of measuring the performanceBS EN 50229:2015Incorporating corrigendum February 2016National forewordThis British Standard is the UK implementation of EN 50229:2015, The UK participation in its preparation was entrusted

2、 by TechnicalCommittee CPL/59, Performance of household electrical appliances, toSubcommittee CPL/59/1, Dishwashers and washing machines.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary

3、 provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 93846 7ICS 97.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was publish

4、ed under the authority of theStandards Policy and Strategy Committee on 31 October 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 50229:201531 May 2016 Implementation of CENELEC corrigendum February 2016:Formula 11 correctedBS EN 50229:2007 which is withdr

5、awn.incorporating corrigendum February 2016. It supersedesEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50229 October 2015 ICS 97.060 Incorporating corrigendum February 2016English Version Electric clothes washer-dryers for household use - Methods of measuring the performance Lavantes-schante

6、s lectriques usage domestique - Mthodes de mesure de laptitude la fonction Elektrische Wasch-Trockner fr den Hausgebrauch - Prfverfahren zur Bestimmung der Gebrauchseigenschaften This European Standard was approved by CENELEC on 2015-06-30. CENELEC members are bound to comply with the CEN/CENELEC In

7、ternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to a

8、ny CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the o

9、fficial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour

10、g, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CE

11、NELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50229:2015 E EN 50229:2015 (E) - 2 - Contents Page European foreword - 3 - 1 Scope - 4 - 2 Normative references - 4 - 3

12、Terms, definitions and symbols .- 5 - 4 Requirements - 7 - 5 Test conditions, materials and instrumentation .- 8 - 6 Preparation for testing .- 9 - 7 Performance measurement General requirements . - 10 - 8 Tests for performance - 11 - 9 Assessment of performance . - 18 - 10 Tolerances and control pr

13、ocedures to be used for verification purposes - 29 - 11 Data to be reported - 30 - Annex A (normative) - 31 - Splitting the base load - 31 - Annex B (normative) Test report data to be reported - 34 - Bibliography . - 40 - BS EN 50229:2015- 3 - EN 50229:2015 (E) European foreword This document (EN 50

14、229:2015) has been prepared by CLC/TC 59X “Performance of household and similar electrical appliances“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-06-30 latest

15、 date by which the national standards conflicting with this document have to be withdrawn (dow) 2018-06-30 This document supersedes EN 50229:2007. The major technical modifications compared to EN 50229:2007 are: a) The structure has been revised to assure a better readability. b) All references conc

16、erning EN 60456:2011 and EN 61121:2013 have been updated. c) Precise instruction to determine the load capacity for drying. d) Precise instruction of composition of partial loads Splitting the base load. e) Revision of Test report data to be reported tables. Introduction of method for additional dry

17、ing.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European C

18、ommission and the European Free Trade Association. BS EN 50229:2015EN 50229:2015 (E) - 4 - 1 Scope This European Standard specifies the test methods that has to be applied in accordance with the Commission Directive 96/60/EC of 19 September 1996 implementing Council Directive 92/75/EEC with regard t

19、o energy labelling of household combined washer-driers. It deals with performance criteria for the complete operation cycle of a 60 C cotton wash programme as specified in EN 60456:2011 and a drying cycle based on the “Dry cotton programme“ as specified in EN 61121:2013, tolerances for the verificat

20、ion procedure. This European Standard is concerned neither with safety nor with performance requirements. NOTE Washer-dryers for communal use in blocks of flats or in launderettes are within the scope of this standard, but machines for commercial laundries are not included. 2 Normative references Th

21、e following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 60335-

22、2-7 Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines (IEC 60335-2-7) EN 60335-2-11 2010 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers (IEC 60335-2-11:2008) EN 60456 2011 Clothes

23、 washing machines for household use Methods for measuring the performance (IEC 60456:2010) EN 60704-3 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 3: Procedure for determining and verifying declared noise emission values (IEC 60704-3)

24、EN 60734 Household electrical appliances - Performance - Water for testing (IEC 60734) EN 61121 2013 Tumble dryers for household use Methods for measuring the performance (IEC 61121:2012, modified) EN ISO 80000-1 2013 Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) BS EN 50229

25、:2015- 5 - EN 50229:2015 (E) 3 Terms, definitions and symbols 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in 3.1 of EN 60456:2011, except for 3.1.15, 3.1.22, 3.1.25, 3.1.Z1 3.1.Z12, together with the following apply. 3.1.1 washer-dryer washing machine

26、 which includes both a spin extraction function and also a means for drying the textiles, usually by heating and tumbling 3.1.2 rated washing capacity maximum mass in kg of dry textiles which the manufacturer declares can be washed in the washer-dryer 3.1.3 rated drying capacity maximum mass in kg o

27、f dry textiles which the manufacturer declares can be dried in the washer-dryer 3.1.4 complete operation cycle complete washing and drying process, as defined by the required programmes, consisting of a washing cycle and a drying cycle set 3.1.5 washing cycle complete washing process, as defined by

28、the required programme, consisting of a series of different operations (wash, rinse, spin) 3.1.6 drying cycle complete drying process, as defined by the required programme, consisting of a series of different operations (heat, spin, cool down) 3.1.7 drying cycle set set of drying cycles in which a r

29、ated drying load and a residual drying load are dried Note 1 to entry: Usually a drying cycle set consists of two or more drying cycles involving the rated drying load and the residual drying load but when a washer-dryer has a rated drying capacity equal to its rated washing capacity the term drying

30、 cycle set applies to the cycle in which the rated drying load is dried. 3.1.8 automatic drying drying process which automatically switches off when a certain moisture content of the load is reached 3.1.9 partial load part of the test load used during a single drying cycle Note 1 to entry: Usually t

31、he rated drying capacity of a washer-dryer is smaller than its rated washing capacity. In this case, for a complete operating cycle the test load for washing has to be divided into partial loads to perform the drying tests. Note 2 to entry: Partial load is a general term that means either rated dryi

32、ng load or residual drying load. BS EN 50229:2015EN 50229:2015 (E) - 6 - Note 3 to entry: If, for a particular washer-dryer the rated drying capacity is equal to the rated washing capacity, the term partial load means the entire base load. 3.1.10 rated drying load part of the base load having a mass

33、 after conditioning equal to the rated drying capacity of the washer-dryer except for the case where the rated drying capacity is equal to the rated washing capacity in which case the rated drying load shall have the same mass as the base load Note 1 to entry: Under circumstances where the rated dry

34、ing capacity is less than half the rated washing capacity, more than one rated drying load will need to be prepared from the base load. 3.1.11 residual drying load remaining part of the base load after the rated drying load(s) has been removed Note 1 to entry: If, for a particular washer-dryer the r

35、ated drying capacity is equal to the rated washing capacity, there will be no residual drying load. 3.1.12 final moisture content moisture content of a test load at the end of a drying cycle 3.1.13 additional drying supplementary drying of the test load applied when the selected drying programme fai

36、ls to achieve a final moisture content of 3,0 % or less 3.2 Symbols The symbols used in this standard are listed in Table 1. NOTE The symbols in 3.2 of EN 60456:2011 and 3.2 of EN 61121:2013 do not apply to this European Standard. Table 1 List of symbols Symbol Unit Definition L l Water consumption

37、E kWh Energy consumption t min Programme duration T C Temperature W g Mass of load % Moisture content S rpm Maximum spin speed K kg Rated capacity X % Reflectance value n - Number of test strips in a test run s - Standard deviation C - Sum of average reflectance for each soil for a single test run M

38、 - Number of soil types per stain test strip - Sum of average reflectance for all soils for all test runs B - Number of test runs in a test series Q - Ratio of sum of reflectance for the test washing machine against the sum of the reflectance for the reference machine. P - Confidence interval BS EN

39、50229:2015- 7 - EN 50229:2015 (E) F - Student T factor tw-1, 0,05W - Number of degrees of freedom in the Student T factor Index Definition w Washing cycle d Drying cycle wd Complete operation cycle i Initial value f Final value 0 Conditioned N Nominal value for partial load amounts and target final

40、moisture p partial load m Measured value Add result of additional drying program runs required to reach final moisture target s specific value calculated by division with the rated washing capacity a Soil type j Test strip k Test run t Machine on test r Reference machine c Cold water h Hot water M M

41、ain wash Superscripts Definition (Bar) Average value for a test series (mean value). 4 Requirements 4.1 General This document describes test methods for the measurement of the following performance parameters: Washing performance; Water extraction performance; Water consumption for washing; Water co

42、nsumption for drying; Energy consumption for washing; Energy consumption for drying; Programme time for washing; Programme time for drying; Maximum spin speed. NOTE While this document describes the general procedure for the measurement of these parameters, much of the necessary and specific detail

43、is contained in EN 60456:2011 and EN 61121:2013. Any claims of performance referring to this document for these parameters shall be measured in accordance with the requirements of this document (refer to Clause 7 for details). BS EN 50229:2015EN 50229:2015 (E) - 8 - 4.2 Rated capacity The rated wash

44、ing capacity shall be declared by the manufacturer or supplier as the maximum mass of cotton textiles, to be washed in the cotton programme, at 0,5 kg intervals given in any user information. The rated washing capacity for any textile type shall not exceed the maximum mass of dry laundry, in kilogra

45、ms, to be used in the washer-dryer in accordance with EN 60335-2-7. If the rated washing capacity is not declared, it shall be deduced from the volume of the drum according to EN 60456:2011, N.2. The rated drying capacity shall be declared by the manufacturer or supplier as the maximum mass of cotto

46、n textiles, to be dried in either a drying only cycle or a combined washing and drying cycle without interruption, whichever is higher, at 0,5 kg intervals given in any user information. The rated drying capacity for any textile type shall not exceed the maximum mass of dry laundry, in kilograms, to

47、 be used in the washer-dryer in accordance with 3.1.9 of EN 60335-2-11:2010. If the rated drying capacity is not declared, it shall be deduced from the volume of the drum according to EN 61121:2013, Annex E. 4.3 Dimensions See 4.3 of EN 60456:2011. 5 Test conditions, materials and instrumentation 5.

48、1 General The tolerances specified for parameters within this document (using the symbol “”) indicate the allowable limits of variation from the specified parameter outside which the test or results shall be invalid. The statement of tolerance does not permit the deliberate variation of these specif

49、ied parameters. Unless otherwise specified, the reference machine shall be considered a test washing machine with respect to conditions, materials and equipment specified. 5.2 Ambient conditions 5.2.1 Electricity supply Supply voltage and frequency shall be in accordance with EN 60456:2011, 5.2.1. 5.2.2 Water supply 5.2.2.1 General The measured total water hardness, water temperature and water pressure of water supplied to washer-dryers shall comply with the following requirements and shall be reporte