BS EN 50290-2-26-2002 Communication ncables — nPart 2-26 Common design rules and nconstruction — Halogen free flame nretardant insulation compounds《通信电缆 第2-26部分 通用设计规则和制造 无卤素的阻燃绝缘化.pdf

1、BRITISH STANDARDBS EN 50290-2-26: 2002Incorporating amendment no. 1Communication cables Part 2-26: Common design rules and construction Halogen free flame retardant insulation compoundsThe European Standard EN 50290-2-26:2002, incorporating amendment A1:2007, has the status of a British StandardICS

2、29.035.20; 33.120g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 50290-2-26:2002This British Standard, having been prepared under the directio

3、n of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 15 April 2002 BSI 2007ISBN 978 0 580 59500 4National forewordThis British Standard is the UK implementation of EN 50290-2-26:2002, incorporating amendme

4、nt A1:2007. It supersedes BS 7878-6:1997 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee EPL/46, Cables, wires and waveguides, RF connectors and accessories for communication and signalling, to Subcommittee EPL/46/1, Communication cables. A list of or

5、ganizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obl

6、igations.Amendments issued since publicationAmd. No. Date Comments17270 31 August 2007 Table 1 replacedEUROPEAN STANDARD EN 50290-2-26NORME EUROPENNEEUROPISCHE NORMJanuary 2002CENELECEuropean Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Kom

7、itee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 50290-2-26:2002 EICS 29.035.20; 33.120.10 Supersedes HD 624.6 S1:1995English versionCo

8、mmunication cablesPart 2-26: Common design rules and construction Halogen free flame retardant insulation compoundsCbles de communicationPartie 2-26: Rgles de conceptioncommunes et construction Mlanges pour enveloppesisolantes sans halogne et avecpropagation retarde de flammeKommunikationskabelTeil

9、2-26: Gemeinsame Regelnfr Entwicklung und Konstruktion -Halogenfreie flammwidrigeIsoliermischungenThis European Standard was approved by CENELEC on 2001-11-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving thisEuropean Standard

10、 the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, Ge

11、rman). A version in anyother language made by translation under the responsibility of a CENELEC member into its ownlanguage and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Rep

12、ublic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.+A1June 2007EN 50290-2-26:2002 - 2 -ForewordThis European Standard was prepared by a joint working group of the Technical Committee

13、s CENELECTC 46X, Communication cables, and CENELEC TC 86A, Optical fibres and optical fibre cables.The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC asEN 50290-2-26 on 2001-11-01.This European Standard supersedes HD 624.6 S1:1995.The following dates w

14、ere fixed: latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement (dop) 2002-08-01 latest date by which the national standards conflictingwith the EN have to be withdrawn (dow) 2004-08-01Annexes designated “normative“ are

15、part of the body of the standard.In this standard, annexe A is normative.This European Standard has been prepared under the European Mandate M/212 given to CENELEC by theEuropean Commission and the European Free Trade Association._Foreword to amendment A1 This amendment to the European Standard EN 5

16、0290-2-26:2002 was prepared by a joint working group of the Technical Committee CENELEC TC 46X, Communication cables, and the Technical Committee CENELEC TC 86A, Optical fibres and optical fibre cables. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELE

17、C as amendment A1 to EN 50290-2-26:2002 on 2007-03-01. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-03-01 latest date by which the national standards conflictin

18、g with the amendment have to be withdrawn (dow) 2010-03-01 This amendment introduces a new halogen free insulation compound grade for high temperature. _- 3 - EN 50290-2-26:20021 ScopeThis Part 2-26 of EN 50290 gives specific requirements for halogen free flame retardant insulation compoundsused in

19、communication cables.It is to be read in conjunction with Part 2-20 of EN 50290.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications

20、are listed hereafter.For dated references, subsequent amendments to or revisions of any of these publications apply to thisEuropean Standard only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies (including amendments).E

21、N 60811-1-1:1995 Insulating and sheathing materials of electric and optical cables - Commontest methods - Part 1-1: General application - Measurement of thickness andoverall dimensions - Tests for determining the mechanical properties(IEC 60811-1-1:1993)EN 60811-1-2:1995 Insulating and sheathing mat

22、erials of electric cables - Common test methodsPart 1-2: General application - Thermal ageing methods(IEC 60811-1-2:1985 + corr. May 1986 + A1:1989)EN 60811-1-3:1995 Insulating and sheathing materials of electric and optical cables - Commontest methods - Part 1-3: General application - Methods for d

23、etermining thedensity - Water absorption tests - Shrinkage test (IEC 60811-1-3:1993)EN 60811-1-4:1995 Insulating and sheathing materials of electric and optical cables - Commontest methods - Part 1-4: General application - Tests at low temperature(IEC 60811-1-4:1985 + corr. May 1986 + A1:1993)EN 608

24、11-2-1:1998 Insulating and sheathing materials of electric and optical cables - Commontest methods - Part 2-1: Methods specific to elastomeric compounds - Ozoneresistance, hot set and mineral oil immersion tests (IEC 60811-2-1:1998)EN 60811-3-1:1995 Insulating and sheathing materials of electric and

25、 optical cables - Commontest methods - Part 3-1: Methods specific to PVC compounds - Pressure testat high temperature - Tests for resistance to cracking(IEC 60811-3-1:1985 + corr. May 1986)HD 405.3 S1:1993 Tests on electric cables under fire conditions - Part 3: Tests on bunched wiresor cables ( IEC

26、 60332-3:1992)IEC 60250:1969 Recommended methods for the determination of the permittivity and dielectricdissipation factor of electrical insulating materials at power, audio and radiofrequencies including metre wavelengthsIEC 60754-2:1991+ A1:1997Test on gases evolved during combustion of materials

27、 from cables -Determination of degree of acidity of gases by measuring pH and conductivity3 RequirementsIn case of specific applications, additional performances could be needed. Relevant test methods andrequirements shall be included in the detail specification of the cables.EN 50290-2-26:2002 - 4

28、-Table 1 Halogen free insulation compounds for flame retardant cables Characteristics Test method Unit Grades Cross linked insulation Thermoplastic insulation Thermoplastic insulation 1 Maximum rated temperature at cable for which the compound can be used C 90 70 90 2 Mechanical characteristics 2.1

29、2.11 2.12 In state of delivery Tensile strength - median, min. Elongation at break - median, min. EN 60811-1-1 9.1 MPa % 10 125 9 125 9 125 2.2 2.21 After ageing Ageing conditions - temperature - duration Tensile strength - variation, max. EN 60811-1-2 8.1 C h % 135 2 7 x 24 30 100 2 7 x 24 30 110 2

30、 7 x 24 30 2.22 Elongation at break - median, min. - variation, max. % % 30 100 a40 100 40 3 Heat shock Test conditions - temperature - duration Result to be obtained EN 60811-3-1 9.1 C h Not applicable Not applicable Not applicable 4 Behaviour at low temperature Bending at low temperatureTest condi

31、tions - temperature Result to be obtained EN 60811-1-4 8.1 C - 15 2 No crack - 15 2 No crack - 15 2 No crack 5 Shrinkage EN 60811-1-3 Clause 10 Test conditions - sample length - temperature - duration Result to be obtained, max. mm C h % 200 100 1 4 200 100 1 4 200 100 1 4 - 5 - EN 50290-2-26:2002Ta

32、ble 1 Halogen free insulation compounds for flame retardant cables (continued) Characteristics Test method Unit Grades Cross linkedinsulation Thermoplastic insulation Thermoplastic insulation 6 Pressure at high temperature Test conditions - temperature - duration (for all values of cable diameter) R

33、esult to be obtained - depth of indentation median, max EN 60811-3-1 8.1 C h % Not applicable 80 2 4 50 90 2 4 50 7 Oxygen Index (seenote 1) HD 405.3 % 8 Corrosivity IEC 60754-2 To meet To meet To meet 9 Smoke opacity (see note 2) 10 Toxicity Under consideration 11 Volume resistivity, min. - at maxi

34、mum rated temperature at cable - at 20 C Test conditions - sample length, min. - immersion duration Appended .m m h 108(provisional value)1010(provisional value) 5 2 108(provisional value)1010(provisional value) 5 2 108(provisional value) 1010(provisional value) 5 2 12 Dielectric constant (see note

35、3) IEC 60250 Typical value (under consideration) Typical value (under consideration) 13 Dissipation factor (see note 3) IEC 60250 Typical value (under consideration) Typical value (under consideration) 14 14.1 14.2 Hot set test Test conditions - temperature - duration - load Result to be obtained -

36、elongation, max. - permanent set, max. EN 60811-2-1 Clause 9 C min N/cm2% % 200 3 15 20 175 25 Not applicable Not applicable aProvisional value. NOTE 1 Oxygen index measurement has been found to be a suitable indicator to guide selection and monitoring of materials used in cables which have to meet

37、the fire performance tests specified in the relevant cable specification. NOTE 2 For selection of materials used in cables, IEC 60695-6 may be considered. NOTE 3 When required the dielectric constant and dissipation factor, shall be measured at 1 MHz, and at other required values. Typical values are

38、 under consideration. EN 50290-2-26:2002 - 6 -Annex A(normative)Volume resistivityThis test shall be made on insulated conductor sample.The sample shall be immersed in water previously heated to the specified temperature, a length of about0,25 m at each end of the sample being kept above the water.A

39、 D.C. voltage of between 80 V and 500 V shall be then applied between the conductor and the water.The insulation resistance shall be measured 1 min after application of the voltage.- The volume resistivity shall be calculated from the measured insulation resistance by the following formula:g114g112g

40、612RlogDdeg108whereg114 = volume resistivity, in g87 metersR = measured insulation resistance, in g87g108 = length of the sample, in metersD = outer diameter of the insulation, in mmd = inner diameter of the insulation, in mm.blankBS EN 50290-2-26: 2002BSI389 Chiswick High RoadLondonW4 4ALBSI Britis

41、h Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of Britis

42、h Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the te

43、chnical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying s

44、tandardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international st

45、andards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help

46、to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards

47、developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British

48、 Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted

49、under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grad