BS EN 50291-2-2010 Electrical apparatus for the detection of carbon monoxide in domestic premises Electrical apparatus for continuous operation in a fixed installation in recreatioe.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50291-2:2010Electrical apparatus for the detection of carbon monoxide in domestic premisesPart 2: Electrical apparatus for continuous operation in a fixed installations in

2、recreational vehicles and similar premises including recreational craft Additional test methods and performance requirementsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2011 03:52, Uncontrolled Copy, (c) BSIBS EN 50291-2:2010 BRITISH STANDARDNational forewordThis British Standard is

3、the UK implementation of EN 50291-2:2010.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/31/19, Gas detectors.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessa

4、ry provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 63301 0 ICS 13.040.40; 13.120; 13.320; 97.030 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standa

5、rds Policy and Strategy Committee on 30 April 2011.Amendments issued since publicationDate T e x t a f f e c t e dLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2011 03:52, Uncontrolled Copy, (c) BSIBS EN 50291-2:2010EUROPEAN STANDARD EN 50291-2 NORME EUROPENNE EUROPISCHE NORM April 20

6、10 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved w

7、orldwide for CENELEC members. Ref. No. EN 50291-2:2010 E ICS 13.320 English version Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including r

8、ecreational craft - Additional test methods and performance requirements Appareils lectriques pour la dtection du monoxyde de carbone dans les locaux usage domestiques - Partie 2: Appareils lectriques en fonctionnement continu et en installation fixe dans les vhicules de loisir et locaux similaires

9、incluant les embarcations de loisir - Mthodes dessai supplmentaires et exigences daptitude la fonction Elektrische Gerte fr die Detektion von Kohlenmonoxid in Wohnhusern - Teil 2: Ortsfeste elektrische Gerte zum kontinuierlichen Betrieb in Freizeitfahrzeugen und hnlichen Umgebungen einschlielich Spo

10、rtbooten -Ergnzende Prfverfahren und Anforderungen an das Betriebsverhalten This European Standard was approved by CENELEC on 2010-04-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nat

11、ional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version

12、in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cypr

13、us, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/

14、EXCHANGE CHINA STANDARDS, 19/07/2011 03:52, Uncontrolled Copy, (c) BSIBS EN 50291-2:2010EN 50291-2:2010 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 216, Gas detectors. The text of the draft was submitted to the formal vote and was approved by CENELEC as E

15、N 50291-2 on 2010-04-15. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has

16、to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-04-15 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2013-04-15 This Part 2 is to be used in conjunction with EN 50291-1:2010. This Part 2

17、 supplements or modifies the corresponding clauses of EN 50291-1:2010. Where this Part 2 states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. _ Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2011 03:52, Uncontrolled Copy, (c) BSI

18、BS EN 50291-2:2010 3 EN 50291-2:2010 Contents 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4 General requirements .6 4.1 General6 4.2 Construction 6 4.3 Indicators and alarms 6 4.4 Fault signals 7 4.5 Output signal .7 4.6 Software-controlled apparatus 7 4.7 Labelling and instruction

19、s 7 5 Test and performance requirements .9 5.1 General requirements for tests .9 5.2 Normal conditions for tests9 5.3 Test methods and performance requirements 9 6 Self-contained battery powered apparatus .13 Annexes .13 Bibliography 14 Figure Figure 1 Examples for marking .8 Tables Table 1 Electrom

20、agnetic emission Test conditions and performance requirements 11 Table 2 Electromagnetic immunity Test conditions and performance requirements 12 Table 3 Immunity for DC powered apparatus 13 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2011 03:52, Uncontrolled Copy, (c) BSIBS EN 5029

21、1-2:2010EN 50291-2:2010 - 4 - 1 Scope This European Standard specifies general requirements for the construction, testing and performance of electrically operated carbon monoxide gas detection apparatus, designed for continuous operation in a fixed installation in recreational vehicles and similar p

22、remises including recreational craft. NOTE For caravan holiday homes EN 50291-1 applies. This European Standard specifies apparatus designed to operate in the event of an escape of carbon monoxide and to provide a visual and audible alarms only (Type B of EN 50291-1), or to provide visual and audibl

23、e alarms and an executive action in the form of an output signal that can actuate directly or indirectly a shut-off device and/or other ancillary device (Type A of EN 50291-1). This European Standard excludes apparatus for the detection of combustible gases, other than carbon monoxide itself (see EN

24、 50194-1), for the detection of CO in industrial installations (see EN 45544-1, EN 45544-2 and EN 45544-3) or commercial premises, for CO measurement for smoke and fire detection. 2 Normative references The following referenced documents are indispensable for the application of this document. For da

25、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50270:2006 Electromagnetic compatibility Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen EN

26、50291-1 Electrical apparatus for the detection of carbon monoxide in domestic premises Part 1: Test methods and performance requirements EN 60068-2-6 Environmental testing Part 2-6: Tests Test Fc: Vibration (sinusoidal) (IEC 60068-2-6) EN 60068-2-7 Environmental testing Part 2-7: Tests Test Ga: Acce

27、leration, steady state (IEC 60068-2-7) EN 60068-2-27 Environmental testing Part 2-27: Tests Test Ea and guidance: Shock (IEC 60068-2-27) EN 60529:1991 Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN 60721-3-6:1993 Classification of environmental conditions Part 3-6: Classi

28、fication of groups of environmental parameters and their severities Ship environment (IEC 60721-3-6:1987 + A1:1991) EN 60945:2002 Maritime navigation and radiocommunication equipment and systems General requirements Methods of testing and required test results (IEC 60945:2002) ISO 7637-1:2002 Road v

29、ehicles Electrical disturbances from conduction and coupling Part 1: Definitions and general considerations ISO 7637-2:2004 Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA S

30、TANDARDS, 19/07/2011 03:52, Uncontrolled Copy, (c) BSIBS EN 50291-2:2010 5 EN 50291-2:2010 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 50291-1 and the following apply. 3.1 recreational vehicle recreational vehicles considered by this European Stan

31、dard include recreational craft, caravans and motor caravans NOTE Other motorised vehicles like trucks are known to have residential accommodation. They are not recreational vehicles but are considered as similar premises in respect of this European Standard. 3.2 recreational craft boat of a minimum

32、 length of 2,5 m and a maximum length of 24 m as specified in Directive 94/25/EC, which is intended for sports or leisure purposes NOTE For the purposes of this European Standard the word boat should be taken with the meaning recreational craft. 3.3 remote sensor sensor assembly that is mounted in a

33、 separate location from the control unit NOTE This definition should be read in conjunction with EN 50291-1, Definition 3.7. 3.4 control unit unit that may contain the power supply, signal processing, alarm circuits and indicators 3.5 vehicle supply powered apparatus apparatus designed to be powered

34、 by the vehicles electrical supply 3.6 caravan trailer leisure accommodation vehicle that meets requirements for construction and use of road vehicles EN 13878:2003 3.7 motor caravan self-propelled leisure accommodation vehicle that meets requirements for construction and use of road vehicles. It co

35、ntains at least seats and table, sleeping accommodation which may be converted from the seats, cooking facilities, and storage facilities EN 13878:2003 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2011 03:52, Uncontrolled Copy, (c) BSIBS EN 50291-2:2010EN 50291-2:2010 - 6 - 3.8 carav

36、an holiday home transportable leisure accommodation vehicle that does not meet requirements for construction and use of road vehicles, that retains means for mobility and that is for temporary or seasonal occupation EN 13878:2003 4 General requirements 4.1 General This subclause of EN 50291-1 is app

37、licable, with the following addition: In this European Standard there are requirements that cover all apparatus. Additional application specific requirements apply to certain groups of recreational vehicles, such as boats. An apparatus which complies with the requirements for recreational craft will

38、 automatically comply with the requirements for motor caravans and caravans. An apparatus which complies with the requirements for motor caravans will automatically comply with the requirements for caravans. The apparatus are designed for continuous operation. NOTE 1 When the vehicle is not in use t

39、he apparatus may be switched off in order to save the vehicles power supply or the internal batteries. The apparatus may consist of one or more sensor(s) and a control unit. Sensors (integrated into the apparatus or remote) shall be designed to detect carbon monoxide. NOTE 2 Sensors or apparatus des

40、igned according EN 50291-1 may be used as apparatus or as component of it, if the additional requirements of this European Standard are complied with. The apparatus shall reliably detect the presence of carbon monoxide in recreational vehicles under the stated application conditions, shall produce a

41、n alarm and Type A apparatus shall be able to initiate executive actions whenever the level exceeds the alarm set point. The apparatus, electrical assemblies and components shall comply with EN 50291-1, where applicable, with the construction requirements of 4.2 to 4.7 and the test and performance r

42、equirements of Clause 5. 4.2 Construction This subclause of EN 50291-1 is applicable, with the following addition: Each sensor shall be constructed of materials that will not corrode in the environment where it is designed for, e.g. in the presence of a salt-laden atmosphere as exists in a marine en

43、vironment, or be affected by the gases and vapours that may be expected to be present in a recreational craft. Adequate means shall be provided to mount the remote sensor(s), pointing vertically downwards, securely to the vehicles substructure. The control unit shall be constructed of materials that

44、 are suitable for use in the intended application e.g. in the cabin or below deck area of a recreational craft. 4.3 Indicators and alarms This subclause of EN 50291-1 is applicable, with the following addition: 4.3.3 Addition: If more than one sensor is connected to a control unit, the control unit

45、shall indicate the alarm condition of the different sensors individually. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2011 03:52, Uncontrolled Copy, (c) BSIBS EN 50291-2:2010 7 EN 50291-2:2010 4.4 Fault signals This subclause of EN 50291-1 is replaced by: The apparatus shall provide

46、 a visual and audible fault signal in the event of interruption of communication between control unit and the remote sensor(s). The audible fault signal shall be clearly identified and different from a gas alarm. 4.5 Output signal This subclause of EN 50291-1 is applicable, with the following additi

47、on: The output signal of the apparatus shall operate under the same conditions as the visual and audible alarm. For triggering an output signal, there shall be no built-in delay. 4.6 Software-controlled apparatus This subclause of EN 50291-1 is applicable. 4.7 Labelling and instructions 4.7.1 Genera

48、l This subclause of EN 50291-1 is applicable, with the following additions: The manufacturer shall declare for which of the following application(s) the device is approved: domestic premises; caravans; motor caravans; boats. This shall be noted on a label on the device or fixed to the device with a

49、more detailed explanation in the manual (see Figure 1). If one instruction manual is used for different types of devices it shall be explicitly noted which type is related to which of the above mentioned applications. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 19/07/2011 03:52, Uncontrolled Copy, (c) BSIBS EN 50291-2:2010EN 50291-2:2010 - 8 - a) Appropriate for domestic premises (caravan holiday homes), caravans, motor caravans and boats b) Appropr