BS EN 50370-1-2005 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Emission《电磁兼容性(EMC) 机床用产品系列标准 排放》.pdf

1、BRITISH STANDARD BS EN 50370-1:2005 Electromagnetic compatibility (EMC) Product family standard for machine tools Part 1: Emission The European Standard EN 50370-1:2005 has the status of a British Standard ICS 25.080.01; 33.100.10 BS EN 50370-1:2005 This British Standard was published under the auth

2、ority of the Standards Policy and Strategy Committee on 9 August 2005 BSI 9 August 2005 ISBN 0 580 46136 X National foreword This British Standard is the official English language version of EN 50370-1:2005. The UK participation in its preparation was entrusted by Technical Committee GEL/210, EMC Po

3、licy, to Subcommittee GEL/210/11, EMC Product standards, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in

4、 this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a

5、 contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or propos

6、als for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 17 and a back cover. The BSI copyright notice displa

7、yed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 50370-1 NORME EUROPENNE EUROPISCHE NORM April 2005 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrote

8、chnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50370-1:2005 E ICS 25.080.01; 33.100.10 English version Elect

9、romagnetic compatibility (EMC) Product family standard for machine tools Part 1: Emission Compatibilit lectromagntique (CEM) Norme de famille de produits pour les machines-outils Partie 1: Emission Elektromagnetische Vertrglichkeit (EMV) Produktfamiliennorm fr Werkzeugmaschinen Teil 1: Straussendung

10、 This European Standard was approved by CENELEC on 2005-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical

11、 references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN

12、ELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irel

13、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 50370-1:2005 2 Foreword This European Standard was prepared by the Technical Committee CENELEC TC 210, Electromagnetic compatibility (EMC). T

14、he text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50370-1 on 2005-02-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-02-01 lates

15、t date by which the national standards conflicting with the EN have to be withdrawn (dow) 2008-02-01 This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directive 89/336/E

16、EC. See Annex ZZ. The purpose of this product family standard is to establish uniform requirements for the electromagnetic emission of the machine tools contained in the scope, to fix test specifications of emission, to refer to Basic Standards for methods of testing, to standardise conditions durin

17、g the tests and test report format for the assessment of conformity. _ 3 EN 50370-1:2005 Contents 1 Scope.4 2 Normative references.4 3 Definitions 4 4 System configuration.5 4.1 Test approach .6 5 Emission measurements.7 5.1 Classification and testing procedures .7 5.1.1 Machine tool containing no e

18、lectromagnetically relevant components7 5.1.2 Machine tool containing electromagnetically relevant components.7 5.2 Configuration of equipment under test8 5.2.1 Configuration of equipment - Procedure A.9 5.2.2 Configuration of equipment - Procedure B.9 5.2.3 Configuration of equipment - Procedure C

19、9 5.3 Type test of machine tools with various configurations 9 5.4 Test plan and test report .10 5.4.1 Test plan.10 5.4.2 Test report 10 6 Product documentation.11 Annex A (normative) Type test requirements12 Annex B (normative) Entire electrical set.13 Annex C (normative) Modules used for machine t

20、ools 14 Annex D (informative) Test plan 15 Annex E (informative) Testing procedure flow chart 16 Annex ZZ (informative) Coverage of Essential Requirements of EC Directives 17 EN 50370-1:2005 4 1 Scope This standard deals with the electromagnetic emission (radio frequency protection) of machine tools

21、, excluding electro discharge machines (EDM), designed exclusively for industrial and similar purposes that use electricity, the rated voltage of the machine tool not exceeding 1 000 V AC or 1 500 V DC between lines. Machine tools may incorporate motors, heating elements or their combination, may co

22、ntain electric or electronic circuitry, and may be powered by the mains, or any other electrical power source. This standard does not cover fixed installations as defined in the Guide to the Application of Directive 89/336/EEC, published by the European Commission. Emission requirements in the frequ

23、ency range 9 kHz to 400 GHz are covered. No measurements need to be performed at frequencies where no requirements are specified. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the

24、appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the p

25、ublication referred to applies (including amendments). EN 55011 Industrial, scientific and medical (ISM) radio-frequency equipment Radio disturbance characteristics Limits and methods of measurement (CISPR 11, mod.) EN 55022 Information technology equipment Radio disturbance characteristics Limits a

26、nd methods of measurement (CISPR 22, mod.) EN 61800-3 Adjustable speed electrical power drive systems Part 3: EMC product standard including specific test methods (IEC 61800-3) CISPR 16-1 Specification for radio disturbance and immunity measuring apparatus and methods Part 1: Radio disturbance and i

27、mmunity measuring apparatus 3 Definitions For the purposes of this document, the following terms and definitions apply. 3.1 machine tool (MT) machine, not portable as a whole during its operation, driven by an external electrical energy source and intended to work typically metal products in the sol

28、id state, with material removal (cutting processes as turning, milling, grinding, drilling, machining.) or without material removal (forming processes as bending, forging, etc.) The machine tool is normally equipped with a power supply, an electrical and electronic assembly for power and control and

29、 one or more power drive systems for the movement of mobile elements or parts 5 EN 50370-1:2005 3.2 module unit consisting of mechanical, pneumatic, hydraulic, electrical and/or electronic parts (examples: machine bed, tool holder, sensor, spindle unit, cabinet including NC-controller and human-mach

30、ine-interface, programmable logic controller - PLC, power drive.), intended exclusively for an industrial assembly operation for incorporation in an apparatus or system. A component can be considered as a module 3.3 electromagnetically relevant component/module An electromagnetically relevant compon

31、ent or module for emission aspects is defined as one that, due to its electromagnetic characteristics, is liable to cause electromagnetic disturbances such that it will influence the emission characteristics of typical assemblies into which it may be incorporated 3.4 port particular boundary of the

32、specified machine tool or module with the electromagnetic environment of the process (IEV 131-02-21 modified) NOTE By boundary is meant the physical limits of the complete machine tool or module. 3.5 power interface connections needed for the distribution of electrical power within the machine tool

33、3.6 entire electrical set assembly of all electro-magnetic relevant modules separated from the mechanical structure of the machine tool allowing the assembly to be tested in a reference test site 3.7 type test test of one or more devices made to a certain design to show that the design meets certain

34、 specifications (IEV 151-04-15) 3.8 equipment generic term, referring to the entire machine tool, the entire electrical set or an electrical/ electromechanical module 4 System configuration A basic configuration may consist of (see Figure 1) an electrical feeding section, control and protection circ

35、uits and equipment, one or more basic power conditioning units (example: drive modules) performing control and/or conversion of electrical energy, one or more actuators and their associated transducers, control and sequencing systems such as NC-controllers, programmable controllers and their associa

36、ted peripherals, programming and debugging tools, test equipment and human-machine interfaces, peripherals (transducer(s), operator station, emergency stop devices, etc.), the structure and the moving parts driven by the actuator(s). EN 50370-1:2005 6 M 1 M X Se nsors Actuators Control Axis X Axis 1

37、 Si gnal /C ont rol P ort Cabinet Enclosure Port Mechanic s Power Po rt Earth Port Signal Contr ol Inter face Control Inter fac e Signal /Control Po rt Power Interface (E xternal P or t) Internal Po r t ( E xternal P o rt ) (Exter nal Port) M 1 M X Se nsors Actuators Control Axis X Axis 1 Si gnal /C

38、 ont rol P ort Cabinet Enclosure Port Mechanic s Power Po rt Earth Port Signal Contr ol Inter face Control Inter fac e Signal /Control Po rt Power Interface (E xternal P or t) Internal Po r t ( E xternal P o rt ) (Exter nal Port)Figure 1 System configuration and example of ports 4.1 Test approach Ty

39、pe testing of a finished product is the normal method for conformity assessment against the requirements of a standard, but complete testing of an entire machine tool at a conventional EMC test site is only technically possible and economically feasible for a limited number of machines. A distinctio

40、n shall be drawn between type-testable machines and machines which, because of the weight, dimensions, operation or unreasonable testing costs and testing delay, cannot be type-tested as a whole at a conventional EMC test site. Furthermore, it is necessary to take into account single-piece productio

41、n and the multitude of types as well as expansions and modifications. Distinctions shall be drawn between the following cases and shall be taken into account: type-testable machines; machines which are not type-testable; multitude of types; modifications, additions and expansions. Each testing proce

42、dure for conformity assessment is based on one or a combination of various tests: type test at the EMC test site; visual inspection of entire machine tool; additional tests on entire machine tool 1) . 1)Such tests are usually performed in the manufacturers premises. 7 EN 50370-1:2005 5 Emission meas

43、urements Emission measurements shall be performed in accordance with EN 55011 and CISPR 16. The content of these standards are not repeated here however modifications or additional information needed for the practical application of the testing procedures are given in the present product standard. (

44、These conditions may include in situ measurements as long as they are in accordance with the test methods specified in EN 55011 and CISPR 16). 5.1 Classification and testing procedures The emission testing procedures are described in the following paragraphs. A flow chart providing an overview of th

45、e test procedures is included in the informative Annex E. 5.1.1 Machine tool containing no electromagnetically relevant components If the machine tool contains no electromagnetically relevant components, no tests have to be carried out. EXAMPLES Machine tools containing only components such as squir

46、rel cage motors and electromechanical switches. 5.1.2 Machine tool containing electromagnetically relevant components If the machine tool contains electromagnetically relevant components such as electronic control and power parts (sub-assemblies, sub-systems, etc.), one of the procedures laid down i

47、n Table 1 shall be carried out. The test procedure is chosen by the manufacturer based on the characteristics of the machine tool. Table 1 Testing procedures Test procedure Procedure A (Applicable for the entire MT) Procedure B (Applicable for the entire electrical set) Procedure C (Applicable for e

48、lectrical or electromechanical modules) Type test Required Required Required Visual inspection of entire MT Not required Required Required Additional tests on entire MT aNot required Not required Required aSuch tests are usually performed in the manufacturers premises. 5.1.2.1 Test procedure A The m

49、achine tool shall be tested according to the emission requirements laid down in this standard (see 5.2 to 5.4 and Annex A). During measurement, the machine tool shall operate as specified by the manufacturer. 5.1.2.2 Test procedure B The entire electrical set of the machine tool shall be tested according to the specific emission requirements laid down in this standard (see 5