BS EN 50377-7-2-2004 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LC-PC duplex terminated on IEC 60793-2 .pdf

1、BRITISH STANDARD BS EN 50377-7-2:2004 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 7-2: LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre The European Standard EN 50377-7-2:2004 has the status of a Britis

2、h Standard ICS 33.180.20 BS EN 50377-7-2:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 12 October 2004 BSI 12 October 2004 ISBN 0 580 44569 0 National foreword This British Standard is the official English language version of EN 50377-

3、7-2:2004. The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained

4、 on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of t

5、he BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid en

6、quirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This d

7、ocument comprises a front cover, an inside front cover, the EN title page, pages 2 to 32, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDAR

8、D EN 50377-7-2 NORME EUROPENNE EUROPISCHE NORM May 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All right

9、s of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50377-7-2:2004 E ICS 33.180.20 English version Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 7-2: LC-PC duplex terminated on I

10、EC 60793-2 category B1.1 singlemode fibre Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques Spcifications de produits Partie 7-2: Type duplex LC-PC cbl sur une fibre unimodale de catgorie B1.1 selon la CEI 60793-2 Steckverbinderstze und

11、Verbindungsbauelemente fr Lichtwellenleiter- Datenbertragungssysteme Produktnormen Teil 7-2: Bauart LC-PC-Duplex zum Anschluss an Einmodenfasern der Kategorie B1.1 nach IEC 60793-2 This European Standard was approved by CENELEC on 2003-12-02. CENELEC members are bound to comply with the CEN/CENELEC

12、Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENEL

13、EC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.

14、CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Swed

15、en, Switzerland and United Kingdom. EN 50377-7-2:2004 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components. The text of the draft was submitted to the Unique Acceptance Procedure and was approve

16、d by CENELEC as EN 50377-7-2 on 2003-12-02. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-12-01 - latest date by which the national standards conflicting with the EN

17、have to be withdrawn (dow) 2006-12-01 _ - 3 - EN 50377-7-2:2004 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 7-2: LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre Description Performance Coupling mechani

18、sm: latch push-pull Configuration: plug/adaptor/plug Fibre category: IEC 60793-2-50 type B1.1 Cable type see Clause 4 Application: Attenuation grade: (Random mate) Return loss grade: (Random mate) IEC 61753-2-1 category U and ES 200-671 environments (see 1.3) P: 97 % of measurements Q: 99 % of measu

19、rements 2: 45 dB 3: 35 dB 4: 26 dB Normative references EN 61300 series Fibre optic interconnection devices and passive components - Basic test and measurement procedures EN 61753-1-1 Performance standard - Part 1: General guidance EN 61754-20 Basic standard for interface dimensions - Part 20: Type

20、LC connector family EN 186000 Generic specification - Connector sets for optical fibres and cables IEC 60794-2 Optical fibre cables - Part 2: Product specifications (indoor cable) ES 200 671 Passive optical components; Optical fibre connectors for single Mode optical fibre communications system; Com

21、mon requirements and conformance testing ES 300 019 series Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment. Outline and maximum dimensions: 76 Ref. 57 Ref. R25 Min. R25 Min. 51 Max. 32 Max.EN 50377-7-2:2004 - 4 - Contents 1 Scope5 1.1 Pro

22、duct definition .5 1.2 Intermateability.5 1.3 Operating environment .5 1.4 Reliability5 1.5 Quality assurance5 2 Normative references6 3 Description .7 3.1 Plug.7 3.2 Adaptor.7 3.3 Materials .7 3.4 Dimensions.7 3.5 Colour and marking 7 4 Variants.8 4.1 Terminated plug8 4.2 Adaptor.8 4.3 Identificati

23、on of variants.8 5 Dimensional requirements10 5.1 Outline dimensions .10 5.1.1 Plug variants.10 5.1.2 Adaptor variants.11 5.2 Mating face and other limit dimensions .11 5.2.1 Plug11 5.2.2 Ferrule endface geometry after termination.14 5.2.3 Positioning of fibre core 15 5.2.4 Control of fibre axis.16

24、5.2.5 Adaptor17 5.2.6 Pin gauge for adaptor .19 6 Tests20 6.1 Sample size.20 6.2 Test and measurement methods20 6.3 Test sequence20 6.4 Pass/Fail criteria20 7 Test report.20 8 Testing requirements 20 8.1 Dimensional and marking requirements .20 8.2 Optical Performance requirements .21 8.3 Mechanical

25、 Performance requirements 23 8.4 Environmental Performance requirements .27 Annex A (informative) Reference connector details .31 Annex B (informative) Sample size and product requirements .31 Bibliography.32 - 5 - EN 50377-7-2:2004 1 Scope 1.1 Product definition This European Standard contains the

26、initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled singlemode resilient alignment sleeve LC-PC duplex connector set (plug / adaptor / plug) must meet in order for it to be categorised as an European Standard product. Si

27、nce different variants and grades of performance are permitted, product marking details are given in 3.5. 1.2 Intermateability Although all products conforming to the requirements of this European Standard will intermate, the resulting level of random attenuation performance will only be ensured in

28、accordance with Table 1. The intention is that this will be true irrespective of the manufacturing source(s) of the product. In all cases, the intermating of plug variants having different attenuation or return loss grades will result in an uncertain level of random attenuation performance. When int

29、ermating plug variants having different return loss grades, the resulting level of return loss can not be assured to be any better than the worst return loss grade. Similarly, the intermating of a grade P plug with a grade Q plug will result in an uncertain level of random attenuation performance. T

30、able 1 - Ensured level of random attenuation Plug variant/attenuation grade P Q P P P Q P Q A simplex plug can be connected in a duplex adaptor without degrading the level of performance. 1.3 Operating environment The tests selected combined with the severities and durations are representative of an

31、 external weather protected environment defined by: ES 200 671 External weather protected environment defined by ES 300 019 classes 3.3, 3.4 and 3.5; EN 61753-2-1 Category U: uncontrolled environment 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is

32、 20 years, compliance with this European Standard does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this European Standard does not guarantee the manufacturing consistency of the prod

33、uct. This should be maintained using a recognised quality assurance programme. EN 50377-7-2:2004 - 6 - 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the t

34、ext and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to appl

35、ies (including amendments). EN 61300 Series Fibre optic interconnection devices and passive components - Basic test and measurement procedures EN 61300-2-1 Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-2 Part 2-2: Tests - Mating durability EN 61300-2-4 Part 2-4: Tests - Fibre/cable retention E

36、N 61300-2-5 Part 2-5: Tests - Torsion EN 61300-2-6 Part 2-6: Tests - Tensile strength of coupling mechanism EN 61300-2-7 Part 2-7: Tests - Bending moment EN 61300-2-12 Part 2-12: Tests - Impact EN 61300-2-17 Part 2-17: Tests - Cold EN 61300-2-18 Part 2-18: Tests - Dry heat - High temperature enduran

37、ce EN 61300-2-19 Part 2-19: Tests - Damp heat (steady state) EN 61300-2-21 Part 2-21: Tests Damp heat (cycling) EN 61300-2-22 Part 2-22: Tests - Change of temperature EN 61300-2-23 Part 2-23: Tests - Undercut EN 61300-2-26 Part 2-26: Tests Salt mist EN 61300-2-27 Part 2-27: Tests - Dust EN 61300-2-4

38、2 Part 2-42: Tests - Static side load for connectors EN 61300-3-4 Part 3-4: Examinations and measurements - Attenuation EN 61300-3-6 Part 3-6: Examinations and measurements - Return loss EN 61300-3-34 Part 3-34: Examinations and measurements - Attenuation of random mated connectors EN 61753-1-1 Fibr

39、e optic interconnecting devices and passive components performance standard - Part 1-1: General and guidance Interconnecting devices (connectors) IEC 60794-2 Optical fibre cables - Part 2: product specifications IEC 61754-20 Basic standard for interface dimensions - Part 20: Type LC connector family

40、 ES 200 671 Passive optical components; optical fibre connectors for singlemode optical fibre communications system; common requirements and conformance testing ES 300 019 Series Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment. - 7 - EN 5

41、0377-7-2:2004 3 Description The LC-PC duplex connector is a single position plug connector set of plug adaptor plug configuration characterised by cylindrical, spring loaded butting ferrules of 1,25 mm nominal diameter and a latched push-pull coupling mechanism. The optical alignment mechanism of th

42、e connectors is of a resilient sleeve style. 3.1 Plug The plug features a cylindrical zirconia ceramic ferrule and a latched push-pull mechanism. It has a single male key which is used to limit and may be used to orientate, the relative rotation between mated connectors. A cover (dust cap) to protec

43、t the ferrule endface when the connector is in the unmated condition shall be provided. Alternative materials may be used for the ferrule that have directly compatible material properties to zirconia but the endface and performance requirements must be met under all conditions 3.2 Adaptor The adapto

44、r has a zirconia ceramic resilient alignment sleeve. The mounting style is duplex rectangular flange equipped with snap-latches. Covers (dust caps) shall be provided to protect each port of the adaptor. Alternative materials may be used for the sleeve that have directly compatible material propertie

45、s to zirconia but the performance requirements must be met under all conditions 3.3 Materials Materials which are not specified or which are not specifically described are left to the discretion of the manufacturer. 3.4 Dimensions Outline dimensions and other dimensions necessary to ensure intermate

46、ability or which affect performance are specified. All other dimensions are left to the discretion of the manufacturer. Where the mating face limit dimensions are not in agreement with an IEC interface standard this is clearly stated. 3.5 Colour and marking Marking of the product shall be in accorda

47、nce with 2.6.2 of EN 186 000-1 in the following order of precedence: a) identification of manufacturer; b) manufacturing date code : year/week; c) manufacturers part number; d) variant identification number. EN 50377-7-2:2004 - 8 - The following colour scheme is preferred: Table 2 - Preferred colour

48、 scheme Delatch housing Adaptor Blue Blue NOTE The preferred Blue is RAL 5015. 4 Variants 4.1 Terminated plug The following variants are permitted: Table 3 - Plug fibre/cable variants with fibre category IEC 60793-2 Type B1.1 Variant number Fibre/Cable mm Structure P01 0,7 - 1,4 Buffered fibre P02 1

49、,6 0,2 Reinforced cable P03 2,0 0,2 Reinforced cable P04 2,5 0,2 Reinforced cable Q01 0,7 - 1,4 Buffered fibre Q02 1,6 0,2 Reinforced cable Q03 2,0 0,2 Reinforced cable Q04 2,5 0,2 Reinforced cable 4.2 Adaptor The following variants are permitted: Table 4 - Adaptor variants Variant number Format A01 Rectangular flange - duplex 4.3 Identification of variants The identification numbers for the fibre/cable variants and adaptor variants with fi