BS EN 50377-9-1-2003 Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type MT-RJ terminated on IEC 60793-2 c.pdf

1、BRITISH STANDARD BS EN 50377-9-1:2003 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 9-1: Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre The European Standard EN 50377-9-1:2003 has the status of a Br

2、itish Standard ICS 33.180.20 BS EN 50377-9-1:2003 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 12 June 2003 BSI 12 June 2003 ISBN 0 580 42025 6 National foreword This British Standard is the official English language version of EN 50377-9

3、-1:2003. The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Interconnecting devices and passive components, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request t

4、o its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BS

5、I Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enq

6、uirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document compris

7、es a front cover, an inside front cover, the EN title page, pages 2 to 23 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 50377-9-1 NORME EUROPENNE EUROPISC

8、HE NORM May 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by an

9、y means reserved worldwide for CENELEC members. Ref. No. EN 50377-9-1:2003 E ICS 33.180.20 English version Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 9-1: Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimo

10、de fibre Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques - Spcifications de produit Partie 9-1: Type MT-RJ cbl sur fibres multimodales de catgorie A1a et A1b de la CEI 60793-2 Steckverbinderstze und Verbindungsbauelemente fr Lichtwelle

11、nleiter- Datenbertragungssysteme - Produktnormen Teil 9-1: Bauart MT-RJ zum Anschluss von Mehrmodenfasern nach IEC 60793-2, Kategorien A1a und A1b This European Standard was approved by CENELEC on 2002-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipula

12、te the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard

13、exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national e

14、lectrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EN 50377-9-1:2003 - 2 - Foreword This European Stand

15、ard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic connectors. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50377-9-1 on 2002-09-01. The following dates were fixed: - latest date by which the EN has to be implemented

16、at national level by publication of an identical national standard or by endorsement (dop) 2003-12-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-09-01 Annexes designated “normative“ are part of the body of the standard. In this standard, ann

17、ex A is normative. _ - 3 - EN 50377-9-1:2003 Connector sets and interconnected components to be used in optical fibre communication systems Product specifications Part 9-1: Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre Description Performance Coupling mechanism: latched p

18、ush-pull Configuration: plug/adapter/plug Fibre Category: IEC 60793-2 type A1a and A1b Cable Type: See Table 2 Application: Attenuation grades: (Random mated) Return loss grade: Customer premises IEC category C Max. 0,75 dB 95 % 0,5 dB Mean 0,35 dB R: 20 dB Related documents: EN 50173 Information te

19、chnology - Generic cabling systems EN 60794-2 Optical fibre cables - Part 2: Indoor cables - Sectional specification EN 61300 series Fibre optic interconnection devices and passive components - Basic test and measurement procedures EN 186000-1 Generic specification: Connector sets for optical fibres

20、 and cables - Part 1: Requirements, test methods and qualification approval procedures IEC 60793-2 Optical fibres - Part 2: Product specification IEC 61753-1 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance ISO/IEC 11801 Information techn

21、ology - Generic cabling for customer premises Outline and maximum dimensions: Min. Min. 67 Ref 67 Ref R 25 R 25EN 50377-9-1:2003 - 4 - Contents 1 Scope 5 1.1 Product definition. 5 1.2 Intermateability. 5 1.3 Operating environment . 5 1.4 Reliability . 5 1.5 Quality assurance 5 2 Normative references

22、 5 3 Description. 6 3.1 Plug. 6 3.2 Adapter. 6 3.3 Materials. 6 3.4 Dimensions. 6 3.5 Colour and marking 6 4 Variants 7 4.1 Terminated plug 7 4.2 Adapter . 7 4.3 Identification of variants. 7 5 Dimensional requirements 8 5.1 Outline dimensions. 8 5.1.1 Plug variants. 8 5.1.2 Adapter variants . 9 5.2

23、 Mating face and other limit dimensions 10 5.2.1 Plug 10 5.2.2 Ferrule endface geometry after termination 14 5.2.3 Adapter. 15 6 Tests 16 6.1 Sample size. 16 6.2 Test and measurement methods 16 6.3 Test sequence . 16 6.4 Pass/fail criteria 16 7 Test report. 16 8 Performance requirements. 16 8.1 Dime

24、nsional and marking requirements . 16 8.2 Optical performance requirements 17 8.3 Mechanical performance requirements. 18 8.4 Environmental performance requirements 21 Annex A Sample size and product sourcing requirements 23 - 5 - EN 50377-9-1:2003 1 Scope 1.1 Product definition This standard contai

25、ns the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled multimode MT-RJ connector set (plug adapter plug) must meet in order for it to be categorised as an EN standard product. Since different variants are permitted,

26、product marking details are given in 3.5. 1.2 Intermateability All products conforming to the requirements of this standard will intermate and give the specified level of random attenuation and random return loss performance provided the same core size is used. The intention is that this will be tru

27、e irrespective of the manufacturing source(s) of the product. 1.3 Operating environment The tests selected combined with the severity and duration are representative of a customer premise protected environment as defined in EN 50173 and ISO/IEC 11801 and as specified in category C per IEC 61753-1. 1

28、.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this standard does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Complianc

29、e with this standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. 2 Normative references EN 50173 Information Technology - Generic cabling systems EN 61300 series Fibre optic interconnection devices and pas

30、sive components - Basic test and measurement procedures EN 61300-2-1 Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-2 Part 2-2: Tests - Mating durability EN 61300-2-4 Part 2-4: Tests - Fibre/cable retention EN 61300-2-6 Part 2-6: Tests - Tensile strength of coupling mechanism EN 61300-2-12 Part

31、 2-12: Tests - Impact EN 61300-2-17 Part 2-17: Tests - Cold EN 61300-2-18 Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-19 Part 2-19: Tests - Damp heat (steady state) EN 61300-2-22 Part 2-22: Tests - Change of temperature EN 61300-2-42 Part 2-42: Tests - Static side load for co

32、nnectors EN 61300-3-6 Part 3-6: Examinations and measurements - Return loss EN 61300-3-27 Part 3-27: Examinations and measurements - Measurement method for the hole location of a multiway connector plug EN 61300-3-30 Part 3-30: Examinations and measurements - Polish angle and fibre position on singl

33、e ferrule multifibre connectors EN 61300-3-34 Part 3-34: Examinations and measurements - Attenuation of random mated connectors EN 186000-1 Generic Specification: Connector sets for optical fibres and cables - Part 1: Requirements, test methods and qualification approval procedures EN 50377-9-1:2003

34、 - 6 - IEC 60793-2 Optical fibres - Part 2: Product specifications IEC 61753-1 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance ISO/IEC 11801 Information Technology - Generic cabling for customer premises 3 Description The MT-RJ connector

35、 is a single position plug connector set of plug adapter plug configuration characterised by a spring loaded butting rectangular ferrule with two optical fibres and a latched push-pull coupling mechanism. The optical alignment mechanism of the connectors is of precision pin and hole type. 3.1 Plug T

36、he plug features a rectangular composite ferrule and a latch coupling mechanism. A cover (dust cap) to protect the ferrule endface when the connector is in the unmated condition shall be provided. 3.2 Adapter The adapter has no role in the final alignment mechanism. The mounting style is - rectangul

37、ar flange - 2 hole. Covers (dust caps) may be provided to protect each port of the adapter. 3.3 Materials Materials which are not specified or which are not specifically described are left to the discretion of the manufacturer. The material for the ferrule is filled composite silica and guide pins a

38、re of stainless steel. Alternative materials, which have compatible material properties, may be used as long as endface and performance requirements are met under all conditions as specified in this document. 3.4 Dimensions Outline dimensions and other dimensions necessary to ensure intermateability

39、 or which affect performances are specified. All other dimensions are left to the discretion of the manufacturer. Where the mating face limit dimensions are not in agreement with the IEC interface this is clearly stated. 3.5 Colour and marking Marking of the product shall be in accordance with 2.6.2

40、 of EN 186000-1 in the following order of precedence: a) identification of manufacturer; b) manufacturing date code: year/week; c) manufacturers part number; d) variant identification number. The following colour scheme is preferred: Table 1 - Preferred colour scheme Adapter Plug Black Black - 7 - E

41、N 50377-9-1:2003 4 Variants 4.1 Terminated plug The following variants are permitted: Table 2 - Plug variants Variant No. Fibre/Cable mm Structure Note C01 F 3,7 x 1,8 Reinforced cable Without pins C01 M 3,7 x 1,8 Reinforced cable With pins C02 F 2,8 Reinforced cable Without pins C02 M 2,8 Reinforce

42、d cable With pins C03 F 3,7 x 1,8 Reinforced cable Without pins C03 M 3,7 x 1,8 Reinforced Cable With pins C04 F 2,8 Reinforced Cable Without pins C04 M 2,8 Reinforced Cable With pins 4.2 Adapter The following variants are permitted: C01 and C02 variants are for A1a fibre (50 ) and variants C03 and

43、C04 are for A1b fibre (62,5 ). Table 3 - Adapter variants Variant No. Format D01 Rectangular flange 2 hole 4.3 Identification of variants Table 4 - Identification of plug variants Variant number Performance grade (Attenuation/return loss) Identification number C01 F MR EN 50377-9-1-C01F-MR C01M MR E

44、N 50377-9-1-C01M-MR C02M MR EN 50377-9-1-C02F-MR C02 F MR EN 50377-9-1-C02M-MR C03 F MR EN 50377-9-1-C03F-MR C03M MR EN 50377-9-1-C03M-MR C04 F MR EN 50377-9-1-C04F-MR C04M MR EN 50377-9-1-C04M-MR Table 5 - Identification of adapter variants Variant number Performance grade (Attenuation/return loss)

45、 Identification number D01 - EN 50377-9-1-D01 NOTE The adapter plays no role in the final alignment of this connector style. EN 50377-9-1:2003 - 8 - 5 Dimensional requirements 5.1 Outline dimensions 5.1.1 Plug variants Variant No. C01F A ERef. Dimensions Note Min. mm Max. A - 56,5 B 9,1 9,3 C - 35,5

46、 D - 10,05 E 7,11 7,19 Figure 2 - 0utline dimensions - Plug C01F / C02F / C03F / C04F Variant No. C01M ERef. Dimensions Note Min. mm Max. A - 58,75 B 9,1 9,3 C - 38,3 D - 10,05 E 7,11 7,19 Figure 3 - Outline dimensions - Plug C01M / C02M / C03M / C04M - 9 - EN 50377-9-1:2003 5.1.2 Adapter variants V

47、ariant No. D01 Panel cut out F M2 D E A B C G H I Ref. Dimensions Note Min. mm Max. A - 10,0 B - 22,0 C - 28,0 D - 18,0 E - 2,3 F - 9,4 G 10,1 10,7 H 18 18,4 I 9,4 10 Figure 4 - Outline dimensions - Adapter EN 50377-9-1:2003 - 10 - 5.2 Mating face and other limit dimensions 5.2.1 Plug A A See Figure

48、 6 Mechanical reference planeFigure 5 - Dimensions - Plug - 11 - EN 50377-9-1:2003 Ref. Dimensions Note Min. mm Max. A 4,61 4,69 B 7,11 7,19 C 2,4 2,5 D 4,35 4,45 E 3,8 4 F 2,597 2,603 G 1,45 1,55 H 5,3 J 0,25 Radius K 5,1 L 9,35 9,75 1 M 7,9 9 N 82 88 Degrees P 3,8 4 Q 0,35 2,8 S 0,8 Radius T 0,9 1

49、,1 U 0,15 0,5 V 0,4 Diameter W 0,697 0 0,699 0 Diameter, 6 AA 0,83 1,2 BB 1,37 1,44 CC 0,6 0,87 NOTE 1 When reference L = 9,1 mm the force exerted by the ferrule must be less than or equal to 11,8 N and when reference L = 9,3 mm the force exerted by the ferrule must be greater than or equal to 7,8 N. NOTE 2 Each pinhole shall accept a gauge as shown in Figure 7 to a depth of 5,5 mm with a maximum force of 1,7 N. In addition, both pinholes of a plug