BS EN 50483-1-2009 Test requirements for low nvoltage aerial bundled ncable accessories — nPart 1 Generalities《低压架空捆绑电缆附件用试验要求 一般性》.pdf

1、Test requirements for lowvoltage aerial bundledcable accessories Part 1: GeneralitiesBS EN 50483-1:2009raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsNational forewordThis British Standard is the UK implementation of EN 50483-1:2

2、009.The UK participation in its preparation was entrusted by Technical CommitteeGEL/20, Electric cables, to Subcommittee GEL/20/11, Cable accessories.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the

3、necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 56177 1ICS 29.240.20BRITISH STANDARDBS EN 50483-1:2009Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority o

4、f the StandardsPolicy and Strategy Committee on 31 March 2009 Amendments issued since publicationAmd. No. Date Text affectedEUROPEAN STANDARD EN 50483-1 NORME EUROPENNE EUROPISCHE NORM January 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electro

5、technique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50483-1:2009 E ICS 29.240.20 English version Test requirement

6、s for low voltage aerial bundled cable accessories - Part 1: Generalities Prescriptions relatives aux essais des accessoires pour rseaux ariens basse tension torsads - Partie 1: Gnralits Prfanforderungen fr Bauteile fr isolierte Niederspannungsfreileitungen - Teil 1: Allgemeines This European Standa

7、rd was approved by CENELEC on 2008-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concernin

8、g such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its

9、own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, It

10、aly, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50483-1:2009EN 50483-1:2009 2 Foreword This European Standard was prepared by a sub-group of WG 11 of the Technical Committee CE

11、NELEC TC 20, Electric cables. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50483-1 on 2008-12-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by end

12、orsement (dop) 2009-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-12-01 This is Part 1 of CENELEC standard EN 50483 “Test requirements for low voltage aerial bundled cable accessories”, which has six parts: Part 1: Generalities; Part 2: Ten

13、sion and suspension clamps for self supporting system; Part 3: Tension and suspension clamps for neutral messenger system; Part 4: Connectors; Part 5: Electrical ageing test; Part 6: Environmental testing. _ BS EN 50483-1:2009 3 EN 50483-1:2009 Contents 1 Scope 4 2 Normative references 4 3 Terms and

14、 definitions .5 4 Symbols 8 5 Products concerned 8 6 Marking .8 7 Quality procedure 8 8 Routine and sample tests .8 8.1 Checking compliance of the supplied products . 9 8.2 Final inspection and testing . 9 8.3 Inspection and test records . 9 9 Type tests 10 9.1 General test conditions 10 9.2 Test fo

15、r permanent marking 11 9.3 Tests and sample selection . 11 9.4 Test reports . 11 Annex A (normative) List of tests for compliance . 13 Annex B (normative) Test selection Samples needed for type tests . 15 Annex C (informative) Highest rated temperatures of insulating compounds . 23 Bibliography . 24

16、 Tables Table A.1 Selective table for type tests, sample tests and routine tests . 13 Table B.1 Tension clamps for self supporting system EN 50483-2 15 Table B.2 Suspension clamps for self supporting system EN 50483-2 16 Table B.3 Tension clamps for neutral messenger EN 50483-3 17 Table B.4 Suspensi

17、on clamps for neutral messenger EN 50483-3 18 Table B.5 Insulation piercing connectors (IPC) EN 50483-4 19 Table B.6 Preinsulated sleeves EN 50483-4 21 Table B.7 Preinsulated lugs EN 50483-4 . 22 BS EN 50483-1:2009EN 50483-1:2009 4 1 Scope EN 50483 series applies to overhead line fittings for tensio

18、ning, supporting and connecting aerial bundled cables (ABC) of rated voltage U0/U (Um): 0,6/1 (1,2) kV. The objective is to provide a method of testing the suitability of accessories when used under normal operating conditions with low voltage aerial bundled cables (ABC) complying with HD 626. There

19、 is variation between the different ABC specifications provided by HD 626, and tests carried out on one of the ABC types may not be completely applicable to ABC of a different specification. Therefore, the purchasers of accessories tested to this European Standard, must ensure that all their require

20、ments are met. NOTE This European Standard does not invalidate existing approvals of products achieved on the basis of national standards and specifications and/or the demonstration of satisfactory service performance. However, products approved according to such national standards or specifications

21、 cannot directly claim approval to this European Standard. It may be possible, subject to agreement between supplier and purchaser, and/or the relevant conformity assessment body, to demonstrate that conformity to the earlier standard can be used to claim conformity to this standard, provided an ass

22、essment is made of any additional type testing that may need to be carried out. Any such additional testing that is part of a sequence of testing cannot be done separately. Climate differs across Europe and in order to meet the differing geographic climatic conditions it is necessary to provide a ra

23、nge of tests to meet these variations. A range of optional, additional tests is provided to meet the varying climatic needs and these should be agreed between the customer and the supplier (see Annex C in EN 50483-6). The purpose of this Part 1 is to define the common aspects of the products include

24、d in the above scope. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 5

25、0182:2001, Conductors for overhead lines Round wire concentric lay stranded conductors EN 50483 series, Test requirements for low voltage aerial bundled cable accessories EN 60068-1:1994, Environmental testing Part 1: General and guidance (IEC 60068-1:1988 + corrigendum Oct. 1988 + A1:1992) EN 61238

26、-1:2003, Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um= 42 kV) Part 1: Test methods and requirements (IEC 61238-1:2003, mod.) EN ISO 9001:2008, Quality management systems Requirements (ISO 9001:2008) HD 626, Overhead distribution cables of rated voltage Uo

27、/U(Um): 0,6/1 (1,2) kV IEC 60050-461, International Electrotechnical Vocabulary (IEV) Part 461: Electric cables BS EN 50483-1:2009 5 EN 50483-1:2009 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60050-461 and the following apply. 3.1 adiabatic occu

28、rring with no addition or loss of heat from the system under consideration 3.2 aerial bundled cable (ABC) aerial cable consisting of a group of insulated conductors which are twisted together including, or not, a non insulated conductor IEV 461-08-02, modified NOTE The terms bundled conductors, bund

29、led cables, bundled cores, conductor bundles and bundle could be used as equivalent to the term aerial bundled cable (ABC). 3.3 aerial-insulated-cable insulated cable designed to be suspended overhead and outdoors IEV 461-08-01 3.4 angle of deviation complementary angle to the angle defined by the t

30、wo parts of the cable on both sides of the suspension clamp 3.5 branch connector metallic device for connecting a branch conductor to a main conductor at an intermediate point on the latter IEV 461-17-05 3.6 branch conductor conductor connected to the main conductor by a connector 3.7 clamp bolt bol

31、t which tightens two parts of a clamp together 3.8 conductor insulation insulation applied on a conductor IEV 461-02-02, modified 3.9 conductor (of a cable) part of a cable which has the specific function of carrying current IEV 461-01-01 3.10 connector metallic device to connect cable conductors to

32、gether IEV 461-17-03 BS EN 50483-1:2009EN 50483-1:2009 6 3.11 core assembly comprising conductor and its own insulation IEV 461-04-04, modified 3.12 equalizer arrangement used in the test loop to ensure a point of equipotential in a stranded conductor EN 61238-1:2003, 3.8 3.13 fixture (or fitting) d

33、evice for attaching ABC tension or/and suspension clamps to a pole or to a wall 3.14 insulation (of a cable) insulating materials incorporated in a cable with the specific function of withstanding voltage IEV 461-02-01 3.15 insulation piercing connector (IPC) connector in which electrical contact wi

34、th the conductor is made by metallic protrusions which pierce the insulation of the ABC core IEV 461-11-08, modified 3.16 median connector connector which during the first heat cycle records the third highest temperature of the six connectors in the test loop EN 61238-1:2003, 3.11 3.17 messenger wir

35、e or rope, the primary function of which is to support the cable in aerial installations, which may be separate from or integral with the cable it supports IEV 461-08-03 3.18 minimum breaking load (MBL) minimum breaking load of the conductor given by HD 626 or the cable manufacturer if not defined i

36、n the standard, or minimum breaking load of the clamp given by the clamp manufacturer 3.19 mobile link device linking the suspension clamp to the fixture 3.20 neutral messenger system aerial insulated system where only the neutral messenger supports the ABC 3.21 pre-insulated (terminal) lug insulate

37、d metallic device for connecting an insulated cable conductor to other electrical equipment 3.22 pre-insulated through connector (sleeve) insulated metallic device for connecting two consecutive lengths of insulated conductors 3.23 rated tensile strength (RTS) estimate of the conductor breaking load

38、 calculated using the specified tensile properties of the component wires EN 50182:2001, 3.7 BS EN 50483-1:2009 7 EN 50483-1:2009 3.24 recycling code mark(s), on a product, which identifies(y) the constituent material(s) of the product 3.25 reference conductor length of conductor(s) without any join

39、ts, which is included in the test loop and which enables the reference temperature and reference resistance(s) to be determined EN 61238-1:2003, 3.7, modified 3.26 reusable connector connector for connecting ABC to stripped cable or bare conductor where only the branch connection can be reused 3.27

40、routine test test made on all accessories to demonstrate their integrity 3.28 sample test test made on samples of a product or components taken from a product adequate to verify that the finished product meets the design specifications 3.29 self supporting system aerial insulated system where all th

41、e cores of the ABC contribute to its support 3.30 sheath uniform and continuous tubular covering of metallic or non metallic material, generally extruded IEV 461-05-03 3.31 shear head head of a bolt, or a device fitted over the head of a bolt or a nut, which is designed to break at a specified torqu

42、e 3.32 suspension clamp device which attaches an aerial insulated cable to a fixture in order to carry its weight and any specified loading IEV 461-18-02, modified 3.33 suspension or tension assembly clamp with mobile link, or not, and associated fixture 3.34 tension clamp device which firmly attach

43、es an aerial insulated cable to a fixture and is designed to transmit the specified mechanical tension in the cable or messenger to the supporting structure IEV 461-18-01, modified 3.35 traceability code mark(s), on a product, which gives information about its manufacture and year of production 3.36

44、 type test test required to be made before supplying a type of material covered by this standard on a general commercial basis, in order to demonstrate satisfactory performance characteristics to meet the intended application BS EN 50483-1:2009EN 50483-1:2009 8 NOTE These tests are of such a nature

45、that, after they have been made, they need not be repeated unless changes are made to the accessory materials, design or type of manufacturing process which might change the performance characteristics. 4 Symbols A list of symbols is available with each part of the standard where applicable. 5 Produ

46、cts concerned This European Standard applies to the following products: tension and suspension clamps for low voltage ABC self supporting system. The type tests are defined in EN 50483-2; tension and suspension clamps for low voltage ABC supporting system with neutral messenger. The type tests are d

47、efined in the EN 50483-3; connectors including insulation piercing connectors (IPC), pre-insulated lugs and through connectors (sleeves) for low voltage ABC systems. The type tests are defined in EN 50483-4. NOTE Diagrams show a representation of fittings only and do not indicate any preference of d

48、esign. Some type tests are common to several products and have been published under specific standards: heat cycling test under EN 50483-5; environmental tests under EN 50483-6. 6 Marking All products mentioned above shall permanently bear: manufacturers trade mark or logo; product code or reference

49、; traceability code / batch number; the minimum and maximum cross section for which the unit is suitable; tightening torque or die reference, if applicable; recycling code, if any. NOTE Other specific markings should be agreed between customer and manufacturer. A test for marking is provided in 9.2. 7 Quality procedure In order to claim compliance with this European Standard, products covered within the se