BS EN 50491-2-2010 General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) - Environmental conditions《家用及建筑电子系统(HBES.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationGeneral requirements for Homeand Building Electronic Systems(HBES)and Building Automationand Control Systems (BACS)Part 2: Environmental conditionsBS EN 50491-2:2010Licensed Copy

2、: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2010 04:17, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 50491-2:2010.The UK participation in its preparation was entrusted to Technical CommitteeIST/6, Data communications.A list of organizations repr

3、esented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 64028 5ICS 97.120Compliance with a British Standard cannot confer imm

4、unity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 30 June 2010.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 50491-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/

5、08/2010 04:17, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 50491-2 NORME EUROPENNE EUROPISCHE NORM March 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenu

6、e Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50491-2:2010 E ICS 97.120 English version General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control

7、 Systems (BACS) - Part 2: Environmental conditions Exigences gnrales pour systmes lectroniques pour les foyers domestiques et les btiments (HBES) et pour systmes de gestion technique du btiment (SGTB) - Partie 2: Exigences denvironnement Allgemeine Anforderungen an die Elektrische Systemtechnik fr H

8、eim und Gebude (ESHG) und an Systeme der Gebudeautomation (GA) - Teil 2: Umgebungsbedingungen This European Standard was approved by CENELEC on 2010-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard t

9、he status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, G

10、erman). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulga

11、ria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50491

12、-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2010 04:17, Uncontrolled Copy, (c) BSIEN 50491-2:2010 2 Foreword This European Standard was prepared by a joint working group of CLC/TC 205, Home and Building Electronic Systems (HBES) and CEN/TC 247, Building Automation, Controls a

13、nd Building Management (BACS). The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50491-2 on 2010-03-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall n

14、ot be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-03-01 latest date by which the national standards co

15、nflicting with the EN have to be withdrawn (dow) 2013-03-01 As a result of the discussions at the CLC/TC 205 meeting on 2004-10-5/6 concerning the structuring of their standards in general parts and open system parts (see CLC/TC 205/Sec0413/INF) the following new parts of EN 50491 under the generic

16、title “General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)“ under the task of the JWG CEN/TC 247-CLC/TC 205 are proposed: Part 2 Environmental conditions; Part 3 Electrical safety requirements; Part 4-1 1)Functional safety requireme

17、nts (for non safety related systems); Part 4-2 1)Functional safety requirements (for safety related systems); Part 5-1 2)EMC requirements, conditions and test set-up; Part 5-2 2)EMC requirements for HBES/BACS used in residential, commercial and light industry environment; Part 5-3 2)EMC requirements

18、 for HBES/BACS used in industry environment. 1)Under consideration. 2)To be ratified. BS EN 50491-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2010 04:17, Uncontrolled Copy, (c) BSI 3 EN 50491-2:2010 Contents Introduction . 4 1 Scope . 4 2 Normative references. 4 3 Terms and de

19、finitions 5 4 General explanation for all tests . 6 5 Environmental conditions . 6 5.1 General test conditions 6 5.2 General performance criteria . 6 6 Environmental requirements 8 6.1 Climatic 8 6.2 Chemical 9 6.3 Mechanical .10 6.4 Biological 11 Annex A (informative) Sets of environmental class co

20、mbinations .12 A.1 Description of the classes 12 Bibliography 15 Tables Table 1 - Details of climatic tests 8 Table 2 - Details of chemical tests . 9 Table 3 - Details of mechanical tests .10 Table 4 - Details of biological tests .11 Table A.1 - Summary of classes 12 BS EN 50491-2:2010Licensed Copy:

21、 Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2010 04:17, Uncontrolled Copy, (c) BSIEN 50491-2:2010 4 Introduction The EN 50491 series deals with developing and testing Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS). The expression HBES/BACS covers an

22、y combination of HBES and/or BACS devices including their separate connected/detachable devices linked together via one or more networks. Part 2 of this series applies to HBES/BACS devices and defines the environmental conditions for these devices. 1 Scope This European Standard provides the environ

23、mental conditions for all devices connected to HBES/BACS. This European Standard is applicable (but not limited) to - operator stations and other human system interface devices, - devices for management functions, - control devices, automation stations and application specific controllers, - field d

24、evices and their interfaces, - cabling and interconnection of devices, - dedicated devices for engineering and commissioning tools for HBES/BACS. The standard defines the general requirements for devices operating in weather protected and non-weather protected locations, ship environments, portable

25、use and also for storage and transport. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendme

26、nts) applies. EN 60068-2-1 Environmental testing - Part 2-1: Tests - Test A: Cold (IEC 60068-2-1) EN 60068-2-6 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:1995 + corrigendum March 1995) EN 60068-2-10 Environmental testing - Part 2-10: Tests - Test J and g

27、uidance: Mould growth (IEC 60068-2-10) EN 60068-2-11 Environmental testing - Part 2: Tests - Test Ka: Salt mist (IEC 60068-2-11) EN 60068-2-14:1999 Environmental testing - Part 2: Tests - Test N: Change of temperature (IEC 60068-2-14:1984 + A1:1986) EN 60068-2-27 Environmental testing - Part 2-27: T

28、ests - Test Ea and guidance: Shock (IEC 60068-2-27) EN 60068-2-30 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30) EN 60068-2-32 Basic environmental testing procedures - Part 2: Tests - Test Ed: Free fall (IEC 60068-2-32) BS EN 50491-2:2010Li

29、censed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2010 04:17, Uncontrolled Copy, (c) BSI 5 EN 50491-2:2010 EN 60068-2-43 Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections (IEC 60068-2-43) EN 60068-2-64 Environmental testing - Part 2-64:

30、Tests - Test Fh: Vibration, broadband random and guidance (IEC 60068-2-64) EN 60529:1991+ A1:2000 Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN 60721-3-1 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severi

31、ties - Section 1: Storage (IEC 60721-3-1) EN 60721-3-2 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation (IEC 60721-3-2) EN 60721-3-3 Classification of environmental conditions - Part 3: Classifi

32、cation of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations (IEC 60721-3-3) EN 60721-3-4 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Station

33、ary use at non-weatherprotected locations (IEC 60721-3-4) EN 60721-3-6 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 6: Ship environment (IEC 60721-3-6) EN 60721-3-7 Classification of environmental conditions

34、- Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use (IEC 60721-3-7) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 60721 series and EN 60068 series and the following apply.

35、3.1 product documentation set of documents that may contain any of the following: - the manufacturers installation and operations literature which accompanies the product; - the product information contained in the manufacturers catalogue and other product marketing material-information; - the descr

36、iption, definitions, product literature and usage as presented in electronic format on the manufacturers (or suppliers) website on the World Wide Web/Internet 3.2 weather protected locations: controlled conditions locations that are enclosed, and where direct weather influences are totally excluded.

37、 In addition, temperature is controlled by heating or cooling to maintain the required conditions, especially where these are very different from those of the open-air climate. Humidity is not controlled. Vibration and shock are insignificant. These locations may be in rural and some urban areas wit

38、h low industrial activities and moderate traffic. There is no particular risk of biological attack due to mould growth, animals, etc. EXAMPLES: - normal living or working areas, for example living rooms, and rooms for general use such as theatres, restaurants, offices, shops, workshops for electroni

39、c assembly and products; BS EN 50491-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/08/2010 04:17, Uncontrolled Copy, (c) BSIEN 50491-2:2010 6 - telecommunication centres; - storage rooms for valuable and sensitive products. 3.3 weather protected locations: uncontrolled conditions l

40、ocations that are enclosed, but whether direct weather influences are not completely excluded.In addition, neither temperature nor humidity is controlled, although heating may be used to raise low temperatures where there is a large difference between the conditions of this class and those of the op

41、en-air-climate. Vibration is of low significance. EXAMPLES: - entrances and staircases of buildings, garages, cellars, and certain workshops; - buildings in factories and industrial process plants; - unattended equipment stations, certain telecommunication buildings, ordinary storage; - rooms for fr

42、ost-resistant products, farm buildings, etc. 4 General explanation for all tests The variety and the diversity of the devices within the scope of this standard make it difficult to define precise criteria for the evaluation of the immunity test results. If, as a result of the application of the test

43、s defined in this standard, the device becomes dangerous or unsafe, the device shall be deemed to have failed the test. 5 Environmental conditions 5.1 General test conditions The HBES/BACS devices shall be designed for use in one or more of the environment classes according to the classification in

44、the EN 60721-3 series as indicated in Table 6.1 up to Table 6.4. All test procedures are described in the EN 60068 series. Environmental tests shall be applied in accordance with the test method in the relevant basic standard of the EN 60068 series. In addition the following shall apply: - the devic

45、e shall be in operation during all tests except those for storage and transportation; - the tests shall be made in the most susceptible operating mode; - it is not always possible to test every function of the devices, and in such cases the most critical mode of operation shall be selected; - the te

46、sts shall be carried out as single tests in sequence. The sequence of testing is optional; - the description of the test, the test method and the test set-up are given in basic standards (EN 60068-x-x) which are referred to in the following tables; - the content of these basic standards is not repea

47、ted here. However, details of modifications and other information needed for the practical application of the tests are given in this European Standard. 5.2 General performance criteria During (except for storage and transportation) and after all tests the device shall not block the transmission med

48、ia or send unintended telegrams. A functional description and a definition of performance criteria, during or as a consequence of environmental testing, shall be provided by the manufacturer and noted in the test report, based on the following criteria. BS EN 50491-2:2010Licensed Copy: Wang Bin, ISO

49、/EXCHANGE CHINA STANDARDS, 27/08/2010 04:17, Uncontrolled Copy, (c) BSI 7 EN 50491-2:2010 Changes in stored data, such as communication error logs, and which are not directly related to the intended function of the equipment may be ignored. In addition the device shall continue to operate according its product documentation as intended during and after the test. No unintended change of state, stored data, unintended or loss of function is allowed. BS EN 50491-2:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS,