BS EN 50525-2-42-2011 Electric cables Low voltage energy cables of rated voltages up to and including 450 750 V (U0 U) Cables for general applications Single core non-sheathed cabl.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50525-2-42:2011Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 2-42: Cables for general applications Single core non-s

2、heathed cables with crosslinked EVA insulationBS EN 50525-2-42:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN50525-2-42:2011. It partially supersedes BS6007:2006.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/20/17, Electri

3、c Cables - Low voltage.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 64368 2ICS 29.060.2

4、0Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2011.Amendments issued since publicationDate Text affectedBS EN 50525-2-42:2011 BRITISH STANDARDNatio

5、nal forewordThis British Standard is the UK implementation of EN50525-2-42:2011. It partially supersedes BS6007:2006.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/20/17, Electric Cables - Low voltage.A list of organizations represented on this committee can beobtain

6、ed on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 64368 2ICS 29.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This Bri

7、tish Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2011.Amendments issued since publicationDate Text affectedThis British Standard is the UK implementation of EN 50525-2-42:2011. In the UK, the BS EN 50525 series of standards nullontain null

8、omplenullsnullpersession details. The tanullle nullelonull nullest snullmmarinulles the relationship nulletnulleen these standards:Part 1 together with Supersedes2-null1 BS nullnullnull-4:1nullnullnull2-41, 2-42 BS null00null: 200null2-11 nullin partnull, 2-12, 2-21 nullin partnull, 2-null1 BS null5

9、00:20002-11 nullin partnull, 2-21 nullin partnull, 2-51 nullin partnull, 2-nullnull, null-21 BS nullnull1null:20012-null1, 2-51 nullin partnull BS 6004:2000null-41 BS 7211:19982-22, 2-null2, 2-null2, null-11, null-null1 NoneNOTE All British Standards will remain current until they are withdrawn on 3

10、1 December 2012. British Standards in bold are only partially supersedednull and new editions onull BS null00null and BS null211 will be introduced on 1 nullanuary 2013.National nullnnenull Nnull nullinformatinullenull nullinulles information on the orinullins and identinullnullation of partinullnul

11、llar nullanullle tnullpes.BS EN 50525-2-42:2011EUROPEAN STANDARD EN 50525-2-42 NORME EUROPENNE EUROPISCHE NORM May 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre:

12、Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50525-2-42:2011 E ICS 29.060.20 Supersedes HD 22.7 S2:1995 + A1:1999 + A2:2004English version Electric cables - Low voltage energy cables of

13、rated voltages up to and including 450/750 V (U0/U) - Part 2-42: Cables for general applications - Single core non-sheathed cables with crosslinked EVA insulation Cbles lectriques - Cbles dnergie basse tension de tension assigne au plus gale 450/750 V (U0/U) - Partie 2-42: Cbles pour applications gn

14、rales - Conducteurs isols en matriau EVA rticul Kabel und Leitungen - Starkstromleitungen mit Nennspannungen bis 450/750 V (U0/U) - Teil 2-42: Starkstromleitungen fr allgemeine Anwendungen - Ader- und Verdrahtungsleitungen mit vernetzter EVA-Isolierung This European Standard was approved by CENELEC

15、on 2011-01-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards m

16、ay be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified t

17、o the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu

18、ania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50525-2-42:2011EN 50525-2-42:2011 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 20, Electric cables. Th

19、e text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50525-2-42 on 2011-01-17. This document, which is one of a multipart series, supersedes HD 22.7 S2:1995 + A1:1999 + A2:2004. Attention is drawn to the possibility that some of the elements of this document may be

20、the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012

21、-01-17 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-01-17 _ BS EN 50525-2-42:2011- 3 - EN 50525-2-42:2011 Contents Page 1 Scope 42 Normative references . 43 Terms and definitions . 44 Heat resistant cables (110 C) . 54.1 Cables for fixed wiring

22、H07G-U, H07G-R and H07G-K . 54.2 Cables for internal wiring H05G-U and H05G-K 5Annex A (normative) Tests for cables to EN 50525-2-42 7Annex B (normative) General data . 8Bibliography . 10Tables Table A.1 7Table B.1 General data for Types H07G-U, H07G-R and H07G-K 8Table B.2 General data for Types H0

23、5G-U and H05G-K . 9BS EN 50525-2-42:2011EN 50525-2-42:2011 - 4 - 1 Scope EN 50525-2-42 applies to crosslinked elastomeric insulated single core non-sheathed cables. The cables are of rated voltages U0/U up to and including 450/750 V. NOTE 1 Cables rated 450/750 V may be used at 600/1 000 V when this

24、 cable is used in fixed installations with mechanical protection, within switchgear and control gear. See HD 516. The cables are intended for use in fixed installations within high temperature zones. The maximum conductor operating temperature for each of the cables in this standard is 110 C. NOTE 2

25、 HD 516 contains extensive guidance on the safe use of cables in this standard. This EN 50525-2-42 should be read in conjunction with EN 50525-1, which specifies general requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. Fo

26、r dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE One or more references to the standards below are in respect of a specific sub-division of that standard, for instance a clause, a table,

27、 a class or a type. Cross-references to these standards are undated and, at all times, the latest version applies. EN 50363-1 Insulating, sheathing and covering materials for low voltage energy cables Part 1: Cross-linked elastomeric insulating compounds EN 50395 Electrical test methods for low volt

28、age energy cables EN 50396 Non electrical test methods for low voltage energy cables EN 50525-1 Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 1: General requirements EN 60228 Conductors of insulated cables (IEC 60228) EN 60811-1-4 Insulating an

29、d sheathing materials of electric and optical cables Common test methods Part 1-4: General application Tests at low temperature (IEC 60811-1-4:1985 + A1:1993 + corr. May 1986) 3 Terms and definitions For the purposes of this document, the terms and definitions given in Clause 3 of EN 50525-1 apply.

30、BS EN 50525-2-42:2011- 5 - EN 50525-2-42:2011 4 Heat resistant cables (110 C) 4.1 Cables for fixed wiring H07G-U, H07G-R and H07G-K 4.1.1 Construction 4.1.1.1 Conductor The conductor shall be class 1, class 2 or class 5 according to EN 60228. A separator of suitable material shall be applied around

31、each conductor if the conductors are plain. NOTE If the conductors are tinned the use of a separator is optional. 4.1.1.2 Sizes of cable The sizes of cable shall be: class 1 1,5 mm2to 10 mm2; class 2 1,5 mm2to 240 mm2; class 5 1,5 mm2to 240 mm2. 4.1.1.3 Insulation The insulation shall be a polyolefi

32、n cross-linked material of Type EI 3 to EN 50363-1 applied around the conductor. 4.1.1.4 Marking The cable shall be marked with the CENELEC code H07G-U for cables with class 1 conductor, H07G-R for cables with class 2 conductor or H07G-K for cables with class 5 conductor. The marking shall comply wi

33、th Clause 6 of EN 50525-1. 4.1.2 Requirements Each cable shall comply with the appropriate requirements given in EN 50525-1, and the particular requirements of this part. Testing shall be in accordance with Annex A, and the relevant tests indicated in column 6. The dimensions of the cables shall con

34、form to Table B.1 for the relevant size. 4.2 Cables for internal wiring H05G-U and H05G-K 4.2.1 Construction 4.2.1.1 Conductor The conductor shall be class 1 or class 5, according to EN 60228. 4.2.1.2 Sizes of cable The sizes of cable shall be: class 1 0,5 mm2 to 1 mm2; BS EN 50525-2-42:2011EN 50525

35、-2-42:2011 - 6 - class 5 0,5 mm2to 1 mm2. 4.2.1.3 Insulation The insulation shall be a polyolefin cross-linked material of Type EI 3 to EN 50363-1 applied around the conductor. 4.2.1.4 Marking The cable shall be marked with the CENELEC code H05G-U for cables with class 1 conductor, or H05G-K for cab

36、les with class 5 conductor. The marking shall comply with Clause 6 of EN 50525-1. 4.2.2 Requirements Each cable shall comply with the appropriate requirements given in EN 50525-1, and the particular requirements of this part. Testing shall be in accordance with Annex A, and the relevant tests indica

37、ted in column 7. The dimensions of the cables shall conform to Table B.2 for the relevant size. BS EN 50525-2-42:2011- 7 - EN 50525-2-42:2011 Annex A (normative) Tests for cables to EN 50525-2-42 Table A.1 1 2 3 4 5 6 7 Ref No. Tests a Cate-gory of test Test method described in Applicability of test

38、 Subclause EN Clause 4.1 4.2 H07GH05G1 Electrical tests b 1.1 Resistance of conductors T, S 50395 5 X X 1.2.1 Voltage test at 2 500 V T, S 50395 6 X - 1.2.2 Voltage test at 2 000 V T, S 50395 6 - X 1.3 Insulation resistance at (110 2) C c T 50395 8.2 X X 1.4 Absence of faults in insulation R 5039510

39、 X X 2 Constructional and dimensional tests 2.1 Checking of compliance with constructional provisions T, S 50525-1 Inspection and manual tests X X 2.2 Measurement of thickness of insulation T, S 50396 4.1 X X 2.3 Measurement of overall diameter T, S 50396 4.4 X X 3 Insulation material tests T 50363-

40、1 d - X X 4 Impact test at - 5 C T 60811-1-4 8.5 X X aThe order given does not imply a sequence of testing. bParticular test conditions and requirements are given in Table 1 of EN 50525-1. cTest to be made in air; values based on a specified insulation resistance of 1010cm. dThis EN includes all the

41、 test methods and requirements for the material. Material to be tested is taken from the finished cable. BS EN 50525-2-42:2011EN 50525-2-42:2011 - 8 - Annex B (normative) General data NOTE 1 The overall dimensions of cables have been calculated in accordance with EN 60719. NOTE 2 Cables designated “

42、-U” have class 1 conductors, “-R” have class 2 conductors and “-K” have class 5 conductors. Table B.1 General data for Types H07G-U, H07G-R and H07G-K 1 2 3 4 5 6 Nominal cross-sectional areas of conductor Class of conductor (EN 60228) Insulation thickness Specified value Mean overall diameter Minim

43、um insulation resistance at 110 C Lower limit Upper limit mm mm mm mm M.km 1,5 2,5 4 6 10 1 1 1 1 1 0,8 0,9 1,0 1,0 1,2 2,8 3,4 4,0 4,5 5,7 3,5 4,3 5,0 5,6 7,1 0,012 0,011 0,010 0,009 0,008 1,5 2,5 4 6 10 16 25 35 50 70 95 120 150 185 240 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 0,8 0,9 1,0 1,0 1,2 1,2 1,4 1,4

44、 1,6 1,6 1,8 1,8 2,0 2,2 2,4 2,9 3,5 4,2 4,7 6,0 6,8 8,4 9,4 10,9 12,5 14,5 15,9 17,7 19,7 22,4 3,7 4,4 5,2 5,9 7,4 8,5 10,6 11,8 13,7 15,6 18,1 19,9 22,1 24,6 28,0 0,012 0,011 0,010 0,008 0,008 0,006 0,006 0,005 0,005 0,004 0,004 0,004 0,004 0,003 0,003 BS EN 50525-2-42:2011- 9 - EN 50525-2-42:2011

45、 Table B.1 General data for Types H07G-U, H07G-R and H07G-K (continued) 1 2 3 4 5 6 Nominal cross-sectional areas of conductor Class of conductor (EN 60228) Insulation thickness Specified value Mean overall diameter Minimum insulation resistance at 110 C Lower limit Upper limit mm mm mm mm M.km 1,5

46、2,5 4 6 10 16 25 35 50 70 95 120 150 185 240 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 0,8 0,9 1,0 1,0 1,2 1,2 1,4 1,4 1,6 1,6 1,8 1,8 2,0 2,2 2,4 3,0 3,6 4,3 4,8 6,0 7,1 8,8 10,1 11,9 13,6 15,5 17,1 19,0 21,0 23,9 3,7 4,5 5,4 6,0 7,6 8,9 11,0 12,6 14,9 17,0 19,3 21,4 23,8 26,3 29,9 0,012 0,011 0,010 0,008 0,00

47、8 0,006 0,005 0,005 0,004 0,004 0,004 0,003 0,003 0,003 0,003 Table B.2 General data for Types H05G-U and H05G-K 1 2 3 4 5 6 Nominal cross-sectional area of conductor Class of conductor (EN 60228) Insulation thickness Specified value Mean overall diameter Minimum insulation resistance at 110 C Lower

48、 limit Upper limit mm mm mm mm M.km 0,5 0,75 1 1 1 1 0,6 0,6 0,6 1,9 2,1 2,2 2,4 2,6 2,8 0,015 0,013 0,012 0,5 0,75 1 5 5 5 0,6 0,6 0,6 2,1 2,2 2,4 2,6 2,8 2,9 0,014 0,012 0,011 BS EN 50525-2-42:2011- 9 - EN 50525-2-42:2011 Table B.1 General data for Types H07G-U, H07G-R and H07G-K (continued) 1 2 3

49、 4 5 6 Nominal cross-sectional areas of conductor Class of conductor (EN 60228) Insulation thickness Specified value Mean overall diameter Minimum insulation resistance at 110 C Lower limit Upper limit mm mm mm mm M.km 1,5 2,5 4 6 10 16 25 35 50 70 95 120 150 185 240 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 0,8 0,9 1,0 1,0 1,2 1,2 1,4 1,4 1,6 1,6 1,8 1,8 2,0 2,2 2,4 3,0 3,6 4,3 4,8 6,0 7,1 8,8 10,1 11,9 13,6 15,5 17,1 19,0 21,0 23,9 3,7 4,5 5,4