BS EN 50533-2011 Railway applications Three-phase train line voltage characteristics《轨道交通 三相同步控制线电压特性》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50533:2011Railway applications Three-phase train line voltage characteristicsCopyright European Committee for Electrotechnical Standardization Provided by IHS under license

2、 with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50533:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50533:2011. The UK participation in its preparation was entrusted to T e c h n i c a l Committee GEL/

3、9/2, Railway Electrotechnical Applications - Rolling stock.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI

4、 2011 ISBN 978 0 580 70057 6 ICS 29.280; 45.060.01 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2011.Amendments issued since publicationDate T e x

5、 t a f f e c t e dCopyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50533:2011EUROPEAN STANDARD EN 50533 NORME EUROPENNE EUROPISCHE NORM November 2011 CE

6、NELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldw

7、ide for CENELEC members. Ref. No. EN 50533:2011 E ICS 29.280; 45.060.01 English version Railway applications - Three-phase train line voltage characteristics Applications ferroviaires - Caractristiques de la tension de la ligne de train triphase Bahnanwendungen - Eigenschaften der dreiphasigen (Dreh

8、strom-) Bordnetz-Spannung This European Standard was approved by CENELEC on 2011-10-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date

9、lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translatio

10、n under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmar

11、k, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Electrotechnical Standardi

12、zation Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50533:2011EN 50533:2011 2 Contents Foreword . 4 Introduction . 51 Scope . 72 Normative references . 73 Terms, definitions and abbreviations . 83.1 Terms and defin

13、itions . 83.2 Abbreviations 104 Characteristics of the three-phase train line voltage 114.1 General .114.2 Frequency .114.3 Voltage amplitude .124.4 Voltage harmonics 134.5 Voltage unbalance 134.6 Train line voltage amplitude and rate of rise 144.7 Transient overvoltage .164.8 Dynamic characteristic

14、s Voltage dips Supply interruption .164.9 Train line additional data (informative) .205 Shore supply .205.1 General .205.2 Shore supply voltage characteristics 215.3 Shore supply general features .21Annex A (informative) Train line supply architectures .22A.1 General-Train line supply classes 22A.2

15、Class 1 - Galvanic isolation at auxiliary converter output side and sine filter 22A.3 Class 1 - Galvanic isolation at auxiliary converter input side and sine filter .23A.4 Class 2 and Class 3 - Train line supply without galvanic isolation .24Bibliography 26Figures Figure 1 The different voltages of

16、the three-phase train line system . 11Figure 2 Static voltage tolerances along the train line 13Figure 3 Voltage rise time- dU/dt definition. 16Figure 4 Train line voltage start-up . 17Figure 5 Voltage fluctuation tolerances 18Figure 6 Current limitation 20Figure A.1 Train line supply architecture w

17、ith galvanic isolation at auxiliary converter output side . 23Figure A.2 Train line supply architecture with galvanic isolation at auxiliary converter input side . 24Figure A.3 Train line supply architecture without galvanic isolation 25Copyright European Committee for Electrotechnical Standardizati

18、on Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50533:2011 3 EN 50533:2011 Tables Table 1 Frequency 12Table 2 Voltage amplitude 12Table 3 Voltage harmonics . 13Table 4 Current and voltage unbalances 14Table 5 Train

19、 line voltage amplitude and rate of rise- dU/dt . 15Table 6 Transient overvoltage 16Table 7 - 3-AC voltage start-up 16Table 8 Voltage fluctuations . 17Table 9 Overload and interruptions 19Table 10 Informative data about 3-AC voltages . 20Table 11 Train line supply classes 22Copyright European Commit

20、tee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50533:2011EN 50533:2011 4 Foreword This document (EN 50533:2011) has been prepared by Working Group 18 of SC 9XB, “Electromechan

21、ical material on board rolling stock“, of Technical Committee CENELEC TC 9X, “Electrical and electronic applications for railways“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorse

22、ment (dop) 2012-10-10 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2014-10-10 This standardization project was derived from the EU-funded Research project MODTRAIN (MODPOWER). It is part of a series of standards, referring to each other. The h

23、ierarchy of the standards is intended to be as follows: Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Copyright European Committee f

24、or Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50533:2011 5 EN 50533:2011 Introduction This European Standard defines the characteristics of the on board three-phase train line whi

25、ch delivers the electrical energy to the auxiliary power system. The following European Standards and Technical Specifications refer to the defined target energy supply system in this European Standard: CLC/TS 50534 Railway applications Generic system architectures for onboard electric auxiliary pow

26、er systems CLC/TS 50535 Railway applications Onboard auxiliary power converter systems Auxiliary converter interfaces applicable for the different options defined in the target system architectures. CLC/TS 50537 (series) Railway applications Mounted parts of the traction transformer and cooling syst

27、em Standardized products used in conjunction with traction transformers and traction cooling systems. EN 50546 1)Railway applications Shore (external) supply system for rail vehicles Interface description of the shore supply including protection functions. EN 50547 1)Railway applications Batteries f

28、or rail vehicles Standardized batteries for rail vehicles and charging characteristics. The three-phase voltage characteristics depend on the performances of the auxiliary converters which supply the train line but also on the AC load characteristics connected to this train line. In railway applicat

29、ions the available auxiliary power of the train line is generally slightly higher than the power needed by the consumer loads, consequently tight interactions between the auxiliary power converter system and the loads are common and have to be taken into consideration for a proper operation at train

30、 system level. The main objective followed by this European Standard is to define as much as possible the static characteristics and the dynamic behaviour of the on-board three-phase supply network to assure the best electrical compatibility with the AC loads connected to. This European Standard is

31、a guideline for specifying and designing the different parts of the auxiliary power supply system namely the different auxiliary converters and the AC loads (i.e. 3 AC motors, converters, filters, transformers, etc.) connected to the grid. Some specific characteristics of the train line voltage may

32、impact the reliability and the life time of the AC loads if they are not taken into consideration during the design phase of the AC loads. The three-phase train line voltages are never perfectly balanced and pure sinusoidal waveform voltages, as examples: 1) Under development. Copyright European Com

33、mittee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50533:2011EN 50533:2011 6 o the switching of the semi-conductors within the static auxiliary converters may generate voltage

34、harmonics and dU/dt steps on the train line; o the line-to-earth voltage level can vary with the auxiliary supply architecture and the type of faults in the train line; o a common mode voltage can appear to the star point of the 3 AC loads; o the non linear AC loads can be a source of current harmon

35、ics, those currents combined with the train line impedance create voltage harmonics too (mainly the input rectifiers of certain AC loads). In summary: o voltage harmonics can generate noise, additional Joule or iron losses in auxiliary motors and transformers; o high dU/dt and the common mode voltag

36、e are at the origin of motor bearing currents which may lead to a reduced bearing lifetime; o voltage spikes and overvoltages may cause an early ageing of the winding insulation materials. Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot

37、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50533:2011 7 EN 50533:2011 1 Scope This European Standard describes the electrical characteristics of the three-phase train line which delivers the electrical energy from the auxiliary power converter system to the

38、 auxiliary loads. It applies to: o locomotive hauled passenger trains, o electric multiple units, o diesel electric multiple units. This European Standard may apply to other rolling stock types (e.g. light rail vehicles, tramways, metros, etc.) if they are not in the scope of another specific standa

39、rd. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50160:2007 Voltage

40、characteristics of electricity supplied by public distribution networks EN 50546 2)EN 60034-26:2006 EN 60077-1:2002 Railway applications Shore (external) supply system for rail vehicles Rotating electrical machines Part 26: Effects of unbalanced voltages on the performance of three-phase cage induct

41、ion motors (IEC 60034-26:2006) Railway applications Electric equipment for rolling stock Part 1: General service conditions and general rules (IEC 60077-1:1999, mod.) EN 60146-2:2000 Semiconductor converters Part 2: Self-commutated semiconductor converters including direct d.c. converters (IEC 60146

42、-2:1999) EN 61000-2-2:2002 Electromagnetic compatibility (EMC) Part 2-2: Environment Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (IEC 61000-2-2:2002) IEC/TS 60034-17:2006 Rotating electrical machines Part 17: Cage induction

43、motors when fed from converters Application guide IEC 60038:2009 IEC standard voltages UIC 554-1:1979 Power supply to electrical equipment on stationary railway vehicles from a local mains system or another source of energy at 220 V or 380 V, 50 Hz 2) Under development. Copyright European Committee

44、for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 50533:2011EN 50533:2011 8 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the fo

45、llowing terms and definitions apply. 3.1.1 three-phase train line typically a 3-wire or 3-wire and neutral wire line which distributes all along the train the three-phase electrical energy to the auxiliary loads, namely the loads dedicated to the traction systems and the loads for passenger comfort

46、3.1.2 fundamental frequency frequency in the spectrum obtained from a Fourier transform of a time function, to which all the frequencies of the spectrum are referred For the purpose of this European Standard, the fundamental frequency is the one delivered by the auxiliary converters installed on boa

47、rd. 3.1.3 harmonic frequency frequency which is an integer multiple of the fundamental frequency 3.1.4 harmonic component component having a harmonic frequency. Its value is normally expressed as an r.m.s. value 3.1.5 interharmonic frequency frequency which is not an integer multiple of the fundamen

48、tal frequency, e.g. the switching frequency of the auxiliary converters and all the associated harmonics which are not multiple of the fundamental frequency 3.1.6 interharmonic component component having an interharmonic frequency. Its value is normally expressed as an r.m.s. value 3.1.7 harmonic order ratio of the harmonic to the fundamental frequency is the harmoni