BS EN 50600-2-4-2015 Information technology Data centre facilities and infrastructures Telecommunications cabling infrastructure《信息技术 数据中心设施和基础设施 电信布线基础设施》.pdf

1、BSI Standards PublicationBS EN 50600-2-4:2015Information technology Data centre facilities andinfrastructures -Part 2-4: Telecommunications cablinginfrastructureBS EN 50600-2-4:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50600-2-4:2015.The UK participat

2、ion in its preparation was entrusted to TechnicalCommittee TCT/7/3, Telecommunications; Installation requirements:Facilities and infrastructures.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the neces

3、saryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 85319 7ICS 35.020; 35.110; 35.160Compliance with a British Standard cannot confer immunity fromlegal obligations.This British

4、Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 50600-2-4:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50600-2-4 March 2015 ICS 35.020; 35.110; 35.160

5、 English Version Information technology - Data centre facilities and infrastructures - Part 2-4: Telecommunications cabling infrastructure Technologie de linformation - Installation et infrastructures de centres de traitement de donnes - Partie 2-4: Infrastructure du cblage ddi tlcommunications Info

6、rmationstechnik - Einrichtungen und Infrastrukturen von Rechenzentren - Teil 2-4: Infrastruktur der Telekommunikationsverkabelung This European Standard was approved by CENELEC on 2015-02-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions

7、 for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists

8、in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the nationa

9、l electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portug

10、al, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000

11、 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50600-2-4:2015 E BS EN 50600-2-4:2015EN 50600-2-4:2015 2 Content Foreword 5 Introduction 6 1 Scope 8 2 Normative references 8 3 Terms, definitions and abbreviations . 9

12、3.1 Terms and definitions 9 3.2 Abbreviations . 10 4 Conformance . 11 5 Telecommunications cabling within the data centre . 11 5.1 General 11 5.2 Information technology and network telecommunications cabling in the computer room space 14 5.3 Structured cabling for other data centre spaces and applic

13、ation specific structured cabling . 16 6 Availability design principles for telecommunications cabling infrastructure 17 7 Availability classification for telecommunications cabling infrastructure . 17 7.1 General 17 7.2 Telecommunications cabling for the computer room 18 7.3 Telecommunications cabl

14、ing for offices 22 7.4 Telecommunications cabling for monitoring and control . 22 8 Pathways and pathway systems for telecommunications cabling 22 8.1 General 22 8.2 Pathways . 23 8.3 Pathway systems 24 9 Cabinets and racks for the computer room space 25 9.1 General requirements 25 9.2 Requirements

15、for dimensions . 25 9.3 Recommendations 25 10 Documentation and quality plan 25 10.1 Requirements for documentation 25 10.2 Recommendations for documentation 25 10.3 Requirements for the quality plan . 26 11 Management and operation of the telecommunications cabling infrastructure 26 11.1 General 26

16、 11.2 Automated infrastructure management systems 26 11.3 Fibre optic cabling . 26 Annex A (normative) Cabling design concepts 27 A.1 General . 27 BS EN 50600-2-4:2015 3 EN 50600-2-4:2015 A.2 Class 1 cabling concept . 27 A.3 Class 2 cabling concepts . 28 A.4 Class 3 cabling concepts . 30 A.5 Class 4

17、 cabling concepts . 32 Annex B (informative) Energy efficiency considerations for the telecommunications cabling infrastructure . 35 Bibliography . 36 Figures Figure 1 - Schematic relationship between the EN 50600 standards . 7 Figure 2 Impact of growth in an unstructured point-to-point cabling infr

18、astructure 13 Figure 3 Example of point-to-point cabling . 13 Figure 4 Structured cabling infrastructure: setup and growth 14 Figure 5 Data centre cabling subsystems according to EN 50173-5 . 15 Figure 6 Office cabling subsystems according to EN 50173-2 15 Figure 7 Building service cabling subsystem

19、 according to EN 50173-6 16 Figure 8 Telecommunication cabling Class 1 using direct attached cords 18 Figure 9 Transmission channels (interconnect and cross-connect) . 19 Figure 10 ENI redundancy for Class 1 and 2 . 19 Figure 11 Managing moves, adds and changes 20 Figure 12 - Redundant multipath tel

20、ecommunication cabling Class 3 20 Figure 13 - Redundant multipath telecommunication cabling Class 4 21 Figure A.1 Symbols of network elements . 27 Figure A.2 Example of a Class 1 cabling implementation 27 Figure A.3 Example for Class 2 EoR cabling implementation 28 Figure A.4 Example for Class 2 MoR

21、 cabling implementation . 29 Figure A.5 Example for Class 2 ToR cabling implementation 30 Figure A.6 Example for Class 3 EoR cabling implementation 31 Figure A.7 Example for Class 3 ToR cabling implementation 32 Figure A.8 Example for Class 4 EoR cabling implementation 33 BS EN 50600-2-4:2015EN 5060

22、0-2-4:2015 4 Figure A.9 Example for Class 4 ToR cabling implementation 34 Tables Table 1 Telecommunication cabling Availability Classes per space architecture and overall data centre Availability Class for facilities and infrastructures 18 BS EN 50600-2-4:2015 5 EN 50600-2-4:2015 Foreword This docum

23、ent (EN 50600-2-4:2015) has been prepared by CLC/TC 215 “Electrotechnical aspects of telecommunication equipment“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-0

24、2-16 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2018-02-16 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying

25、 any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. BS EN 50600-2-4:2015EN 50600-2-4:2015 6 Introduction The unrestricted access to internet-based information demanded by the information

26、society has led to an exponential growth of both internet traffic and the volume of stored/retrieved data. Data centres are housing and supporting the information technology and network telecommunications equipment for data processing, data storage and data transport. They are required both by netwo

27、rk operators (delivering those services to customer premises) and by enterprises within those customer premises. Data centres need to provide modular, scalable and flexible facilities and infrastructures to easily accommodate the rapidly changing requirements of the market. In addition, energy consu

28、mption of data centres has become critical both from an environmental point of view (reduction of carbon footprint) and with respect to economical considerations (cost of energy) for the data centre operator. The implementation of data centres varies in terms of: a) purpose (enterprise, co-location,

29、 co-hosting or network operator facilities); b) security level; c) physical size; d) accommodation (mobile, temporary and permanent constructions). The needs of data centres also vary in terms of availability of service, the provision of security and the objectives for energy efficiency. These needs

30、 and objectives influence the design of data centres in terms of building construction, power distribution, environmental control and physical security. Effective management and operational information is required to monitor achievement of the defined needs and objectives. This series of European St

31、andards specifies requirements and recommendations to support the various parties involved in the design, planning, procurement, integration, installation, operation and maintenance of facilities and infrastructures within data centres. These parties include: 1) owners, facility managers, ICT manage

32、rs, project managers, main contractors; 2) architects, building designers and builders, system and installation designers; 3) facility and infrastructure integrators, suppliers of equipment; 4) installers, maintainers. At the time of publication of this European Standard, EN 50600 series will compri

33、se the following standards: EN 50600-1, Information technology - Data centre facilities and infrastructures - Part 1: General concepts EN 50600-2-1, Information technology - Data centre facilities and infrastructures - Part 2-1: Building construction EN 50600-2-2, Information technology - Data centr

34、e facilities and infrastructures - Part 2-2: Power distribution EN 50600-2-3, Information technology - Data centre facilities and infrastructures - Part 2-3: Environmental control EN 50600-2-4, Information technology - Data centre facilities and infrastructures - Part 2-4: Telecommunications cabling

35、 infrastructure EN 50600-2-5, Information technology - Data centre facilities and infrastructures - Part 2-5: Security systems EN 50600-3-1, Information technology - Data centre facilities and infrastructures - Part 3-1: Management and operational information The inter-relationship of the standards

36、within the EN 50600 series is shown in Figure 1. BS EN 50600-2-4:2015 7 EN 50600-2-4:2015 EN 50600-2-5Security systemsEN 50600-2-4Telecommunications cabling infrastructureEN 50600-2-3Environmental controlEN 50600-3-1Management and operational informationEN 50600-2-2Power distributionEN 50600-2-1Buil

37、ding constructionEN 50600-1General conceptsFigure 1 - Schematic relationship between the EN 50600 standards EN 50600-2-X standards specify requirements and recommendations for particular facilities and infrastructures to support the relevant classification for “availability”, “security” and “energy

38、efficiency enablement” selected from EN 50600-1. EN 50600-3-X documents specify requirements and recommendations for data centre operations, processes and management. This European Standard addresses the specific requirements for the telecommunications cabling infrastructure in data centres used for

39、 the purpose of IT networking and building services (in accordance with the requirements of EN 50600-1). This European Standard is intended for use by and collaboration between architects, building designers and builders, system and installation designers. This series of European Standards does not

40、address the selection of information technology and network telecommunications equipment, software and associated configuration issues. BS EN 50600-2-4:2015EN 50600-2-4:2015 8 1 Scope This European Standard addresses the wide range of telecommunications cabling infrastructures within data centres ba

41、sed upon the criteria and classifications for “availability” within EN 50600-1. This European Standard specifies requirements and recommendations for the following: a) information technology and network telecommunications cabling (e.g. SAN and LAN); b) general information technology cabling to suppo

42、rt the operation of the data centre; c) telecommunications cabling to monitor and control, as appropriate, power distribution, environmental control and physical security of the data centre; d) other building automation cabling; e) pathways, spaces and enclosures for the telecommunications cabling i

43、nfrastructures. Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this European Standard and are covered by other standards and regulations. However, information given in this European Standard may be of assistance in meeting these standards and regulations. 2 Norm

44、ative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)

45、 applies. EN 50173-1, Information technology - Generic cabling systems - Part 1: General requirements EN 50173-2, Information technology - Generic cabling systems - Part 2: Office premises EN 50173-5, Information technology - Generic cabling systems - Part 5: Data centres EN 50173-6, Information tec

46、hnology - Generic cabling systems Part 6: Distributed building services EN 50174-1, Information technology - Cabling installation - Part 1: Installation specification and quality assurance EN 50174-2, Information technology - Cabling installation - Part 2 Installation planning and practices inside b

47、uildings EN 50600-1:2012, Information technology - Data centre facilities and infrastructures - Part 1: General concepts EN 50600-2-1, Information technology - Data centre facilities and infrastructures Part 2-1: Building construction EN 50600-2-3, Information technology - Data centre facilities and

48、 infrastructures - Part 2-3: Environmental control EN 50600-3-11), Information technology - Data centre facilities and infrastructures - Part 3-1: Management and operational information 1)Submitted to formal vote. BS EN 50600-2-4:2015 9 EN 50600-2-4:2015 3 Terms, definitions and abbreviations 3.1 Te

49、rms and definitions For the purposes of this document, the terms and definitions given in EN 50600-1 and the following apply. 3.1.1 application-specific cabling structured cabling with a configuration and performance which is considered to provide a specific benefit for a single, or limited number of applications, as compared to generic cabling 3.1.2 central patching location passive cross-connect to connect different functional elements of a data centre Note 1 to entry: A central patching