1、BSI Standards PublicationBS EN 50700:2014Information technology Premises distribution accessnetwork (PDAN) cabling tosupport deployment of opticalbroadband networksBS EN 50700:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50700:2014.The UK participation i
2、n its preparation was entrusted to TechnicalCommittee TCT/7, Telecommunications - Installation requirements.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users a
3、re responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 80045 0ICS 35.110Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStand
4、ards Policy and Strategy Committee on 28 February 2014.Amendments issued since publicationDate Text affectedBS EN 50700:2014EUROPEAN STANDARD EN 50700 NORME EUROPENNE EUROPISCHE NORM January 2014 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrote
5、chnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50700:2014 E ICS 35.110 English version Information t
6、echnology - Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks Technologie de linformation - Cblage du rseau de distribution dans les locaux (PDAN) pour prendre en charge le dploiement de rseaux optiques large bande Informationstechnik - Standortv
7、erkabelung als Teil des optischen Zugangsnetzes von optischen Breitbandnetzen This European Standard was approved by CENELEC on 2013-11-25. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a n
8、ational standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German)
9、. A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, B
10、ulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swit
11、zerland, Turkey and the United Kingdom. BS EN 50700:2014EN 50700:2014 - 2 - Contents Page Foreword . 4 Introduction . 5 1 Scope . 9 2 Normative references. 9 3 Terms, definitions and abbreviations 10 3.1 Terms and definitions 10 3.2 Abbreviations . 12 4 Conformance 13 5 Structure of PDAN cabling wit
12、hin multi-subscriber premises 14 5.1 General 14 5.2 Functional elements. 14 5.3 General structure and hierarchy . 14 5.4 Cabling subsystems 15 5.5 Design objectives . 16 5.6 Accommodation of functional elements 16 5.7 Interfaces 17 5.8 Dimensioning and configuring . 18 6 PDAN cabling performance . 2
13、1 6.1 General 21 6.2 Environmental performance . 21 6.3 Transmission performance . 21 7 Implementation options . 22 8 Cable requirements 22 8.1 General 22 8.2 Cable 23 8.3 Microducts 23 8.4 Microduct optical fibre . 23 9 Connecting hardware requirements . 23 9.1 General requirements 23 9.2 Connectin
14、g hardware at the SI . 23 9.3 Connecting hardware at other places 24 10 Cords . 24 11 Accommodation of the Subscriber Interface (SI) and the Customer Premises Equipment (CPE)24 11.1 Security for data integrity 24 11.2 Placement of the housing . 25 Annex A (informative) Broadband infrastructure exter
15、nal to multi-subscriber premises . 26 BS EN 50700:2014- 3 - EN 50700:2014 A.1 General 26 A.2 Treatment of single-subscriber premises . 26 A.3 Treatment of multi-subscriber premises . 26 Bibliography 28 Figures Figure 1 Multi-subscriber PDAN cabling (LOC external to the premises) . 6 Figure 2 Example
16、 of multi-subscriber PDAN cabling (LOC internal to the premises) . 6 Figure 3 Schematic relationship between EN 50700 and other relevant TC 215 standards 7 Figure 4 PDAN cabling distribution schematic with ADP (and future LOC) internal to multi-subscriber building . 14 Figure 5 PDAN cabling distribu
17、tion schematic with ADP (and future LOC) internal to premises 15 Figure 6 PDAN cabling distribution schematic with future LOC external to premises 15 Figure 7 Example of accommodation of functional elements. 17 Figure 8 Test and equipment interfaces 18 Figure 9 SI connection to the customer network
18、. 19 Figure 10 Examples of arrangements of SI, OAP and ENTI 20 Figure 11 Examples of SI configuration of passive PDAN cabling 21 Figure A.1 Broadband optical fibre cabling to subscriber premises . 26 Tables Table 1 Contextual relationship between EN 50700 and other relevant TC 215 standards . 8 Tabl
19、e 2 PDAN cabling attenuation . 22 BS EN 50700:2014EN 50700:2014 - 4 - Foreword This document (EN 50700:2014) has been prepared by CLC/TC 215 “Electrotechnical aspects of telecommunication equipment“. The following dates are fixed: latest date by which this document has to be implemented at national
20、level by publication of an identical national standard or by endorsement (dop) 2014-11-25 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2016-11-25 This document has been developed to enable the application of system-independent pre-cabling of m
21、ulti-subscriber premises to enable the delivery of broadband telecommunication services. BS EN 50700:2014- 5 - EN 50700:2014 Introduction Fibre to the home (FTTH) is the subject of standardisation in the form of: Technical Reports such as CLC/TR 50510 which cover general concepts and system planning
22、; component standards that support its implementation; installation standards such as the EN 50174 series. FTTH is a general term applied to the provision of broadband optical networks to residential premises. Some premises accommodate multiple subscribers and these may be residential or commercial
23、enterprises such as offices, data centres, industrial, retail or a mix of these subscriber types. These multi-subscriber premises may consist of one or more buildings. The cabling specified in this standard: constitutes the part of the broadband access network within multi-subscriber premises termed
24、 the premises distribution access network (PDAN); the access network serving single subscriber premises is not normatively addressed in this standard; is intended to be pre-installed, in readiness for subsequent connection of the multi-subscriber premises, to an access providers infrastructure to an
25、 access demarcation point (ADP) - enabling broadband content to be delivered by the service provider(s). Within premises, the importance of the information technology cabling infrastructure is similar to that of other fundamental building utilities such as heating, lighting and mains power. As with
26、other utilities, interruptions to service can have a serious impact. Poor quality of service due to lack of design foresight, use of inappropriate components, incorrect installation, poor administration or inadequate support can disrupt service delivery. This standard: allows access providers to be
27、aware of the minimum implementation delivered to them when they reach such multi-subscriber premises; maximises the opportunity for network evolution by either the access provider or the service providers using that access infrastructure. This standard specifies the cabling between the access demarc
28、ation point (ADP) and the subscriber interface (SI).The transmission performance of the premises cabling between the last operator connection point (LOC) and the ADP is not addressed although the requirements for its accommodation are provided by external reference to the EN 50174 series. The locati
29、on of the LOC may be either outside the premises boundary (see the schematic in Figure 1) or inside the premises, internal or external to a building (see the schematic in Figure 2). BS EN 50700:2014EN 50700:2014 - 6 - . SIDistribution access networkTransport accessnetworkPremises boundaryMulti-subsc
30、riberbuildingMulti-buildingsubscriberADPCabling within scope of thisstandardADPSISISISIPremises entrancePremises entranceOne or moreoperatorssitesLOCFigure 1 Multi-subscriber PDAN cabling (LOC external to the premises) LOCDistributionaccess networkTransport access networkPremises boundaryMulti-subsc
31、riberbuildingMulti-buildingsubscriberADPLOCCabling withinscope of thisstandardSISISISISIADPOne or moreoperatorssitesOne or moreoperatorssitesFigure 2 Example of multi-subscriber PDAN cabling (LOC internal to the premises) Where the subscribers premises are homes, the design of generic cabling beyond
32、 the SI is specified in EN 50173-4. CLC/TR 50173-99-2 and CLC/TR 50173-99-3 provide additional information in relation to cabling design within homes. For other types of subscribers, the design of generic cabling beyond the SI is specified in other standards in the EN 50173 series. This European Sta
33、ndard provides: a) access providers with an application independent optical fibre cabling subsystem; b) an open market for cabling components; BS EN 50700:2014- 7 - EN 50700:2014 c) building professionals (for example, architects) with guidance for the accommodation of cabling and interfaces before
34、specific requirements are known; i.e. in the initial planning either for construction or refurbishment. This European Standard specifies multi-vendor cabling, and is related to: - standards for cabling components developed by Technical Committees of CENELEC and/or IEC; - standards for the quality as
35、surance and installation of information technology cabling (EN 50174 series) and testing of installed cabling (EN 50346 and, by external reference, EN 61280-4-2 and ISO/IEC 14763-3); - applications developed by ETSI and Study Groups of ITU-T. Figure 3 and Table 1 show the schematic and contextual re
36、lationships between the standards produced by TC 215 for information technology cabling, namely: 1) the EN 50173 series where this standard interfaces to the subscriber; 2) installation (EN 50174 series); 3) testing of installed cabling (EN 50346). EN 50173-1: Information technology -Generic cabling
37、 systems - General requirementsEN 50174-2: Information technology -Cabling installation - Installation planning and practices inside buildingsEN 50174-3: Information technology -Cabling installation - Installation planning and practices outside buildingsEN 50174-1: Information technology -Cabling in
38、stallation - Installation specification and quality assuranceEN 50700: Information technology -Premises distribution access network (PDAN) cabling to support deployment of optical broadband networksEN 50346: Information technology -Cabling installation -Testing of installed cablingEN 50173-2: Inform
39、ation technology -Generic cabling systems - Office premisesEN 50173-3: Information technology -Generic cabling systems - Industrial premisesEN 50173-4: Information technology -Generic cabling systems - HomesEN 50173-5: Information technology -Generic cabling systems - Data centresEN 50173-6: Informa
40、tion technology -Generic cabling systems - Distributed building servicesFigure 3 Schematic relationship between EN 50700 and other relevant TC 215 standards BS EN 50700:2014EN 50700:2014 - 8 - Table 1 Contextual relationship between EN 50700 and other relevant TC 215 standards PDAN cabling design ph
41、ase Specification phase Installation phase Operation phase EN 50700 EN 50174-1 EN 50174-1 5: Structure of PDAN cabling within multi-subscriber premises 6: PDAN cabling performance 7: Implementation options 8: Cable requirements 9: Connecting hardware requirements 4 Requirements for specifying instal
42、lations of information technology cabling 5: Requirements for installers of information technology cabling 4: Requirements for specifying installations of information technology cabling Planning phase EN 50174-2 EN 50174-2 4: Requirements for planning installations of information technology cabling
43、6: Segregation of metallic information technology cabling and power supply cabling 7: Electricity distribution systems and lightning protection 8: Office (commercial) premises 9: Industrial premises 10: Homes 11: Data centres 12: Multi-tenant pathways and spaces 5: Requirements for the installation
44、of information technology cabling 6: Segregation of metallic information technology cabling and power supply cabling 8: Office (commercial) premises 9: Industrial premises 10: Homes 11: Data centres 12: Multi-tenant pathways and spaces and EN 50174-3 4. Requirements for planning installations of inf
45、ormation technology cabling 5. Requirements for the installation of information technology cabling 6. Segregation 7. Additional installation practices for specific sites and services and EN 50174-3 4. Requirements for planning installations of information technology cabling 5. Requirements for the i
46、nstallation of information technology cabling 6. Segregation 7. Additional installation practices for specific sites and services and EN 50346 4: General requirements 6: Test parameters for optical fibre cabling BS EN 50700:2014- 9 - EN 50700:2014 1 Scope This European Standard specifies the optical
47、 fibre optical fibre access network cabling within multi-subscriber premises termed the premises distribution access network (PDAN). The premises may comprise single or multiple buildings. The cabling specified is intended to be pre-installed, in readiness for subsequent connection of the multi-subs
48、criber premises to an access providers infrastructure to support deployment of optical broadband networks. This European Standard does not specify either the access network cabling external to the premises or the cabling within the subscriber space for onward distribution of services beyond the cust
49、omer premises equipment. This European Standard specifies: a) the structure and configuration of the optical fibre cabling; b) cabling performance requirements; c) implementation options. Safety practices in relation to optical power hazard are specified in EN 60825-2. Optical powers higher than the hazard levels specified in EN 60825-2 are not considered in this standard. Safety (electrical safety, fire, etc.) and electromagnetic compatibility (EMC) requirements are outside the scope of this European Standard and are co
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1