BS EN 60110-1-1998 Power capacitors for induction heating installations - General《感应加热装置电源电容器 总则》.pdf

1、BRITISH STANDARD BS EN 60110-1:1998 IEC60110-1: 1998 Power capacitors for induction heating installations Part 1: General The European Standard EN60110-1:1998 has the status of a British Standard ICS 31.060.70BSISO60110-1:1998 This British Standard, having been prepared under the directionof the Ele

2、ctrotechnical Sector Committee, was publishedunder the authority ofthe Standards Committee andcomes into effect on 15 December1998 BSI 05-1999 ISBN 0 580 30740 9 National foreword This British Standard is the English language version of EN 60110-1:1998. Itis identical with IEC 60110-1:1998. The UK p

3、articipation in its preparation was entrusted to Technical Committee PEL/33, Power capacitors, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the

4、 UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From1 January1997, all IEC publications have the number60000 added to the old number. For

5、instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex

6、which lists normative references to international publications with their corresponding European publications. The BritishStandards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Corresponde

7、nce Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of i

8、tself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN title page, pages2 to18, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporate

9、d. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSISO60110-1:1998 BSI 05-1999 i Contents Page National foreword Inside front cover Foreword 2 Text of EN60110-1 5ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE

10、NORM EN 60110-1 August 1998 ICS 29.120.99 Supersedes HD207 S1:1977 Descriptors: Induction heating, capacitors, power capacitors, capacitor banks, definitions, generalities, quality, capacity measurements, dielectric strength tests, leak test, thermal stability, safety, installation, marking English

11、version Power capacitors for induction heating installations Part1:General (IEC60110-1:1998) Condensateurs de puissance pour les installations de gnration de chaleur par induction Partie1: Gnralits (CEI60110-1:1998) Leistungskondensatoren fr induktive Erwrmungsanlagen Teil1: Allgemeines (IEC60110-1:

12、1998) This European Standard was approved by CENELEC on1998-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograph

13、ical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

14、 CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,

15、 Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 199

16、8 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN60110-1:1998 EEN60110-1:1998 BSI 05-1999 2 Foreword The text of document33/289/FDIS, future edition1 of IEC60110-1, prepared by IEC TC33, Power capacitors, was submitted to the IEC-CE

17、NELEC parallel vote and was approved by CENELEC as EN60110-1 on1998-08-01. This European Standard supersedes HD207S1:1977. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. Annexes designated “informative” are given for information only. In this sta

18、ndard, Annex A andAnnex ZA are normative andAnnex B andAnnex C are informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC60110-1:1998 was approved by CENELEC as a European Standard without any modification. In the official version, forAnnex C,

19、Bibliography, the following notes have to be added for the standards indicated: Contents Page Foreword 2 1 General 5 1.1 Scope and object 5 1.2 Normative references 5 1.3 Definitions 5 1.4 Service conditions 7 2 Quality requirements and tests 8 2.1 Test requirements 8 2.2 Classification of tests 8 2

20、.3 Capacitance measurement 8 2.4 Measurement of the tangent of the loss angle (tan ) of a capacitor 9 2.5 Voltage test between terminals (routine test) 9 2.6 Voltage test between terminals and container 9 2.7 Test on internal discharge device 10 2.8 Sealing test 10 2.9 Thermal stability test 10 2.10

21、 Capacitor losses test 11 2.11 Capacitance as a function of temperature 11 2.12 Sealing test of cooling ducts, if any 11 2.13 Self-healing test (for self-healing metallized dielectric capacitors) 12 2.14 Short-circuit discharge test 12 2.15 Ageing test (see IEC60110-2) 12 2.16 Destruction test (see

22、IEC60110-2) 12 2.17 Disconnecting tests on internal fuses, if any (see IEC60110-2) 12 3 Overloads 12 3.1 Maximum permissible voltage 12 3.2 Switching voltages 12 3.3 Maximum permissible current 12 4 Safety requirements 13 4.1 Creepage distances 13 4.2 Discharge device 13 4.3 Container connections 13

23、 4.4 Protection of the environment 13 4.5 Additional safety requirements 13 5 Markings 13 5.1 Marking of the capacitor unit 13 5.2 Marking of the bank 14 6 Guide for installation and operation 14 6.1 General 14 latest date by which the ENhas to be implemented at national level by publication of an i

24、dentical national standard or by endorsement (dop)1999-05-01 latest date by which the national standards conflicting with the EN haveto be withdrawn (dow)2001-05-01 IEC 60252 NOTEHarmonized as EN60252:1994 (modified). IEC 60358 NOTEHarmonized as HD597S1:1992 (notmodified). IEC 61048 NOTEHarmonized a

25、s EN61048:1993 (modified). IEC 61049 NOTEHarmonized as EN61049:1993 (modified). IEC 61071-1 NOTEHarmonized as EN61071-1:1996 (modified). IEC 61270-1 NOTEHarmonized as EN61270-1:1996 (not modified).EN60110-1:1998 BSI 05-1999 3 Page 6.2 Measures to obtain adequate cooling 14 6.3 Choice of rated voltag

26、e, current and output 15 6.4 Capacitors for frequent switching on load 15 6.5 Choice of switchgear and switching methods for switching on load 15 6.6 Switching of capacitors with fuses 15 6.7 Operation with varying frequency 15 6.8 Choice of the highest voltage for equipment of a capacitor bank 15 6

27、.9 Shunt capacitors connected in series 15 6.10 Series capacitors 16 6.11 Connecting leads 16 6.12 Live parts along water supply 16 6.13 Post insulators 16 6.14 Danger of freezing for water cooled capacitors 16 Annex A (normative) Methods of measuring the losses on air-cooled self-and forced-ventila

28、ted capacitors 17 Annex B (informative) Formulae for capacitors and installations 17 Annex C (informative) Bibliography 18 Annex ZA (normative) Normative referencestointernational publicationswiththeir correspondingEuropean publications Inside back cover Table 1 Upper limits of the temperatureofthec

29、ooling medium 7 Table 2 Cooling and energization duration for thermal stability test 114 blankEN60110-1:1998 BSI 05-1999 5 1 General 1.1 Scope and object This part of IEC60110 is applicable both to indoor capacitor units and indoor capacitor banks intended to be used, particularly, for power factor

30、correction in induction heating, melting, stirring or casting installations, and similar applications with controlled or adjustable a.c. voltage systems in a frequency range up to50kHz, and with a rated voltage not exceeding3,6kV. Additional requirements for capacitors protected by internal element

31、fuses are given in IEC60110-2. The following capacitors are excluded from this standard: series capacitors for power systems (seeIEC60143); capacitors for motor applications and the like (seeIEC60252); coupling capacitors and capacitor dividers (seeIEC60358); shunt power capacitors of the self-heali

32、ng type for a.c. systems having a rated voltage up to and including1000V (see IEC60831); shunt capacitors for a.c. power systems having a rated voltage above1000V (seeIEC60871); shunt capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including1000V (see IEC609

33、31); small a.c. capacitors to be used for fluorescent and discharge lamps (seeIEC61048 and IEC61049); capacitors to be used in power electronic circuits (see IEC61071); capacitors for microwave ovens (seeIEC61270); capacitors for suppression of radio interference (under consideration); capacitors in

34、tended for use with d.c. voltage superimposed on the a.c. voltage. Accessories such as insulators, switches, instrument transformers, fuses, etc., shall be in accordance with the relevant IEC standards. The object of this standard is: a) to formulate uniform rules regarding performance, testing and

35、rating; b) to formulate specific safety rules; c) to provide a guide for installation and operation. 1.2 Normative references The following normative documents contain provisions which, through reference in the text, constitute provisions of this part of IEC60110. At the time of publication, the edi

36、tions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC60110 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registe

37、rs of currently valid International Standards. IEC60050(436):1990, International Electrotechnical Vocabulary (IEV) Chapter436:Power capacitors. IEC60110-2, Power capacitors for induction heating installations Part2: Ageing test, destruction test and requirements for disconnecting internal fuses 1) .

38、 IEC60143, Series capacitors for power systems. IEC60831, Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including1000V. IEC60871, Shunt capacitors for a.c. power systems having a rated voltage above1000V. IEC60931, Shunt power capacitors of the non

39、-self-healing type for a.c. systems having a rated voltage up to and including1000V. IEC60996:1989, Method for verifying accuracy of tan delta measurements applicable to capacitors. 1.3 Definitions For the purpose of this part of IEC60110, thefollowing definitions apply: 1.3.1 (capacitor) element de

40、vice consisting essentially of two electrodes separated by a dielectric IEV436-01-03 1.3.2 (capacitor) unit assembly of one or more capacitor elements in the same container with terminals brought out IEV436-01-04 1.3.3 self-healing capacitor capacitor the electric properties of which, after local br

41、eakdown of the dielectric, are rapidly and essentially restored IEV436-03-12 1) To be publishedEN60110-1:1998 6 BSI 05-1999 1.3.4 (capacitor) bank number of capacitor units connected so as to act together IEV436-01-06 1.3.5 capacitor in this standard, the word capacitor is used when it is not necess

42、ary to lay particular stress upon the different meanings of the words capacitor unit or capacitor bank 1.3.6 capacitor installation one or more capacitor banks and their accessories IEV436-01-07 1.3.7 discharge device (of a capacitor) device which may be incorporated in a capacitor, capable of reduc

43、ing the voltage between the terminals practically to zero, within a given time, after the capacitor has been disconnected from a network IEV436-03-15 modified 1.3.8 internal fuse (of a capacitor) fuse connected inside a capacitor unit, in series with an element or a group of elements IEV436-03-16 1.

44、3.9 overpressure device (of a capacitor) device designed to give an alarm or to switch off the capacitor in the case of an abnormal increase of the internal pressure IEV436-03-17 modified 1.3.10 overtemperature device (of a capacitor) device designed to give an alarm or to switch off the capacitor i

45、n case of an abnormal increase of the internal temperature 1.3.11 line terminal terminal to be connected to the line IEV436-03-01 modified 1.3.12 rated capacitance (of a capacitor) (C N ) capacitance value for which the capacitor has been designed IEV436-01-12 modified 1.3.13 rated output (of a capa

46、citor) (Q N ) reactive power derived from the rated values of capacitance, frequency and voltage IEV436-01-16 modified 1.3.14 rated voltage (of a capacitor) (U N ) r.m.s. value of the alternating voltage, sinusoidal form, for which the capacitor has been designed IEV436-01-15 modified 1.3.15 rated f

47、requency (of a capacitor) (f N ) frequency for which the capacitor has been designed IEV436-01-14 NOTEIf the capacitor is intended to be used in a range of frequencies, then f Nis the highest frequency of the range. 1.3.16 rated current (of a capacitor) (I N ) r.m.s. value of the alternating current

48、, sinusoidal form, for which the capacitor has been designed IEV436-01-13 modified 1.3.17 capacitor losses active power dissipated in the capacitor IEV436-04-10 NOTEAll loss-producing components should be included, for example: for a unit, losses from dielectric, internal fuses, internal discharge r

49、esistors, connections, etc.; for a bank, losses from unit, external fuses, busbars, discharge resistors, etc. 1.3.18 tangent of the loss angle (of a capacitor) tan (abbreviation) ratio between the equivalent series resistance and the capacitive reactance of the capacitor at specified sinusoidal alternating voltage and frequency IEV436-04-11 1.3.19 maximum permissible a.c. voltage (of a capacitor) (U max ) maximum r.m.s. alternating voltage which a capacitor can withstand for a given tim