BS EN 60127-7-2016 Miniature fuses Miniature fuse-links for special applications《小型熔断器 特殊应用的小型熔断器》.pdf

1、BSI Standards PublicationMiniature fusesPart 7: Miniature fuse-links for special applicationsBS EN 60127-7:2016National forewordThis British Standard is the UK implementation of EN 60127-7:2016. It is identical to IEC 60127-7:2015. It supersedes BS EN 60127-7:2013 which will be withdrawn on 27 Octob

2、er 2018.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/32, Fuses.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are respons

3、ible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 86603 6ICS 29.120.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards P

4、olicy and Strategy Committee on 29 February 2016. Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60127-7:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60127-7 January 2016 ICS 29.120.50 Supersedes EN 60127-7:2013 English Version Miniature fuses - Par

5、t 7: Miniature fuse-links for special applications (IEC 60127-7:2015) Coupe-circuit miniatures - Partie 7: Elments de remplacement miniatures pour applications spciales (IEC 60127-7:2015) Gerteschutzsicherungen - Teil 7: G-Sicherungseinstze fr besondere Anwendungen (IEC 60127-7:2015) This European S

6、tandard was approved by CENELEC on 2015-10-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references conc

7、erning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC m

8、ember into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repu

9、blic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardizati

10、on Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60127-7:2016 E

11、 BS EN 60127-7:2016EN 60127-7:2016 2 European foreword The text of document 32C/507/CDV, future edition 2 of IEC 60127-7, prepared by SC 32C “Miniature fuses“ of IEC/TC 32 “Fuses“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60127-7:2016. The following dates are fixed

12、: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-07-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-10-27 This document supersedes EN

13、60127-7:2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for

14、 Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 60127-7:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes

15、have to be added for the standards indicated: IEC 6269-1:2006 NOTE Harmonized as EN 6269-1:2006. IEC 6269-1:2006/AMD1:2009 NOTE Harmonized as EN 6269-1:2006/AMD1:2009. IEC 6269-1:2006/AMD2:2014 NOTE Harmonized as EN 6269-1:2006/AMD1:2014. BS EN 60127-7:2016EN 60127-7:2016 3 Annex ZA (normative) Norm

16、ative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated referen

17、ces, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards li

18、sted in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-2-21 2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices EN 60068-2-21 2006 IEC 60127-1 2006 Miniature fuses - Part 1: Definitions for miniat

19、ure fuses and general requirements for miniature fuse-links EN 60127-1 2006 + A1 2011 + A1 2011 + A2 2015 + A2 2015 IEC 60127-4 2005 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types EN 60127-4 2005 + A1 2008 + A1 2009 + A2 2012 + A2 2013 IEC 60127-6

20、 2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links EN 60127-6 2014 IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 2007 IEC 60695-2-12 2010 Fire hazard testing - Part 2-12: Glowing/hot-wire b

21、ased test methods - Glow-wire flammability index (GWFI) test method for materials EN 60695-2-12 2010 + A1 2014 + A1 2014 IEC 60695-2-13 2010 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials EN 60695-2-13 2010 + A1

22、2014 + A1 2014 IEC 60695-4 2012 Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products EN 60695-4 2012 IEC 61249-2-7 2002 Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials, clad and unclad - Epoxide woven E-

23、glass laminated sheet of defined flammability (vertical burning test), copper-clad EN 61249-2-7 2002 - - + corrigendum Sep. 2005 ISO 3 1973 Preferred numbers; Series of preferred numbers - - BS EN 60127-7:2016 2 IEC 60127-7:2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative r

24、eferences 6 3 Terms and definitions 7 4 General requirements 8 5 Standard ratings 8 6 Marking . 8 7 General notes on tests 9 8 Dimensions and construction . 14 9 Electrical requirements 15 10 Standard sheets 25 Annex A (informative) Guidance on ratings to be specified by the manufacturer or to be ag

25、reed upon with the testing house 28 Bibliography 29 Figure 1 Standard test board for fuse-links with wire terminations 11 Figure 2 Test board for surface mount fuse-links . 12 Figure 3 Test fuse base . 13 Figure 4 Test circuits for breaking capacity tests 16 Table 1 Power factor and time constant .

26、17 Table 2 Testing schedule for individual ampere ratings for a.c. or d.c. breaking capacity fuse-links 20 Table 3 Testing schedule for individual ampere ratings for a.c. and d.c. breaking capacity fuse-links 21 Table 4 Testing schedule for maximum ampere rating of a homogeneous series (a.c. or d.c.

27、 breaking capacity fuse-links) 22 Table 5 Testing schedule for maximum ampere rating of a homogeneous series (a.c. and d.c. breaking capacity fuse-links) . 23 Table 6 Testing schedule for minimum ampere rating of a homogeneous series 24 Table 7 Testing schedule for all intermediate ampere ratings of

28、 a homogeneous series 24 Table A.1 Guidance on ratings to be specified by the manufacturer or to be agreed upon with the testing house 28 BS EN 60127-7:2016IEC 60127-7:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MINIATURE FUSES Part 7: Miniature fuse-links for special applications FO

29、REWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the e

30、lectrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to

31、technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International O

32、rganization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each techn

33、ical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publi

34、cations is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their nati

35、onal and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment ser

36、vices and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, ser

37、vants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publicat

38、ion, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibilit

39、y that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60127-7 has been prepared by subcommittee 32C: Miniature fuses, of IEC technical committee 32: Fuses. T

40、his second edition cancels and replaces the first edition published in 2013. This edition includes the following significant technical changes with respect to the previous edition: a) defining a test board for surface mount fuse-links, Figure 2; b) defining test schedules for homogenous series. BS E

41、N 60127-7:2016 4 IEC 60127-7:2015 IEC 2015 The text of this standard is based on the following documents: CDV Report on voting 32C/507/CDV 32C/513/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication

42、has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60127 series, published under the general title Miniature fuses, can be found on the IEC website. This International Standard is to be used in conjunction with IEC 60127-1:2006, Miniature fuses Part 1:

43、 Definitions for miniature fuses and general requirements for miniature fuse-links and its Amendment 1 (2011). The clauses of this standard supplement, modify or replace the corresponding clauses in IEC 60127-1. Where there is no corresponding clause or subclause in this standard, the clause or subc

44、lause of IEC 60127-1 applies without modification as far as is reasonable. When this standard states “addition” or “replacement”, the relevant text in IEC 60127-1 is to be adapted accordingly. Subclauses which are additional to those in Part 1 are numbered starting from 101. Additional annexes are n

45、umbered AA, BB, etc. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn

46、, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. BS EN 60127-7:2016IEC 60127-7:2015 IEC 2015 5 INTRODUCTION According to the wish expressed by the users of miniature fuses, all standards, recommendations and other documents relating

47、to miniature fuses should have the same publication number in order to facilitate reference to fuses in other specifications, for example, equipment specifications. Furthermore, a single publication number and subdivision into parts would facilitate the establishment of new standards, because clause

48、s containing general requirements need not be repeated. The IEC 60127 series, under the general heading Miniature fuses, is thus subdivided as follows: IEC 60127-1, Miniature fuses Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links IEC 60127-2, Miniature fuses

49、Part 2: Cartridge fuse-links IEC 60127-3, Miniature fuses Part 3: Sub-miniature fuse-links IEC 60127-4, Miniature fuses Part 4: Universal modular fuse-links (UMF) Through-hole and surface mount types IEC 60127-5, Miniature fuses Part 5: Guidelines for quality assessment of miniature fuse-links IEC 60127-6, Miniature fuses Part 6: Fuse-holders for miniature fuse-links IEC 60127-7, Miniature fuses Part 7: Miniature fuse-links for special applications IEC 60127-8,