1、BRITISH STANDARD BS EN 60268-12:1995 BS 6840-12: 1995 IEC 268-12: 1987 (incorporating Amendment 1:1991 and Amendment2:1994 toIEC 268-12) Sound system equipment Part 12: Application of connectors for broadcast and similar use The European Standard EN 60268-12:1995 has the status of a British Standard
2、 UDC 621.396.7:621.395.6:621.316.541BSEN60268-12:1995 This British Standard, having been prepared under the directionof the Electrotechnical Sector Board, was published underthe authority of the Standards Board and comes intoeffect on 15September 1995 BSI 07-1999 The following BSI references relate
3、to the work on this standard: Committee reference EPL/84 Draftfor comment 93/205919 DC ISBN 0 580 24616 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee EPL/84, Equipment and systems in the field of audio, video and audi
4、ovisual engineering, upon which the following bodies were represented: Association of British Theatre Technicians Audio Engineering Society British Broadcasting Corporation British Educational Supplies Association British Fire Protection Systems Association Limited British Kinematograph, Sound and T
5、elevision Society British Radio and Electronic Equipment Manufacturers Association British Telecommunications plc Consumers Association Federation of British Audio Federation of the Electronics Industry Independent Television Association Institution of Electrical Engineers International Association
6、of Broadcasting Manufacturers National Council for Educational Technology (NCET) Professional Lighting and Sound Association Radio Electrical and Television Retailers Association Royal Institute of British Architects Royal National Institute for Deaf People Society of Cable Television Engineers Amen
7、dments issued since publication Amd. No. Date CommentsBSEN60268-12:1995 BSI 07-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN 60268-12 3 List of references Inside back coverBSEN60268-12:1995 ii BSI 07-1999 National foreword This British Stan
8、dard has been prepared by Technical Committee EPL/84 and is the English language version of EN 60268-12:1995 Sound system equipment Part 12: Application of connectors for broadcast and similar use (incorporating amendment A2:1995), published by the European Committee for Electrotechnical Standardiza
9、tion (CENELEC), and supersedes Harmonziation Document HD 483.12 S2:1992. It was derived by CENELEC from IEC 268-12:1987 and its amendment 1:1991 and amendment 2:1994, published by the International Electrotechnical Commission (IEC). As a consequence of implementing the European Standard this British
10、 Standard is renumbered as BSEN 60268-12 and any reference to BS 6480-12 should be read as a reference to BS EN 60268-12. However, agreement has been given to retain the cross-reference of this standard as Part 12 of the BS 6840 series for ease of reference in relation to other Parts of the series.
11、This Part of BS 6480 supersedes BS 6840-12:1993 which is withdrawn. BS 6840 consists of the following Parts: Part 1: Methods for specifying and measuring general characteristics used for equipment performance; Part 2: Glossary of general terms and calculation methods; Part 3: Methods for specifying
12、and measuring the characteristics of sound system amplifiers; Part 4: Methods for specifying and measuring the characteristics of microphones; Part 5: Methods for specifying and measuring the characteristics of loudspeakers; Part 6: Methods for specifying and measuring the characteristics of auxilia
13、ry passive elements; Part 7: Methods for specifying and measuring the characteristics of headphones and earphones 1) ; Part 8: Methods for specifying and measuring the characteristics of automatic gain control devices; Part 9: Methods for specifying and measuring the characteristics of artificial re
14、verberation, time delay and frequency shift equipment; Part 10: Methods for specifying and measuring the characteristics of peak programme level meters; Part 11: Specification for application of connectors for the interconnection of sound system components; Part 12: Specification for application of
15、connectors for broadcast and similar use; Part 13: Guide for listening tests on loudspeakers; Part 14: Guide for circular and elliptical loudspeakers; outer frame diameters and mounting dimensions; Part 15: Specification for matching values for the interconnection of sound system components; Part 16
16、: Guide to the “RASTI” method for the objective rating of speech intelligibility in auditoria; Part 17: Methods for specifying and measuring the characteristics of standard volume indicators. 1) In preparation.BSEN60268-12:1995 BSI 07-1999 iii A British Standard does not purport to include all the n
17、ecessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred to Corresponding British Standard EN 60065:1993 (IEC 65:198
18、5) BS EN 60065:1994 Safety requirements for mains operated electronic and related apparatus for household and similar general use BS 6840 Sound system equipment HD 483.2 S2:1993 (IEC268-2:1987) Part 2:1993 Glossary of general terms and calculation methods HD 483.11 S3:1993 (IEC 268-11:1987) Part 11:
19、1994 Specification for application of connectors for the interconnection of sound system components HD 483.15 S4:1992 (IEC 268-15:1987) Part 15:1992 Specification for matching values for the interconnection of sound system components IEC 268-4:1972 Part 4:1987 Methods for specifying and measuring th
20、e characteristics of microphones Summary of pages This document comprises a front cover, an inside front cover, pages i to iv, theENtitle page, pages2to 8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will b
21、e indicated in the amendment table on the inside front cover.iv blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60268-12 February 1995 + A2 February 1995 UDC 621.396.7:621.395.6:621.316.541 ICS 31.220.10 Supersedes HD 483.12 S2:1993 Descriptors: Sound system equipment, broadcasting, electr
22、ical connection, electrical connector, designation, classification, application English version Sound system equipment Part 12: Application of connectors for broadcast and similaruse (includes amendment A2:1995) (IEC 268-12:1987 + A1:1991 + A2:1994) Equipements pour systmes lectroacoustiques Partie
23、12: Application des connecteurs pour radiodiffusion et usage analogue (inclutlamendement A2:1995) (CEI 268-12:1987 + A1:1991 + A2:1994) Elektroakustische Gerte Teil 12: Anwendung von Stekverbindern fr Rundfunk-Studiobetrieb und hnliche Zwecke (enthlt nderung A2:1995) (IEC 268-12:1987 + A1:1991 + A2:
24、1994) This European Standard was approved by CENELEC on 1994-12-06. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograp
25、hical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of
26、a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands,
27、Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1995 Copyright re
28、served to CENELEC members Ref. No. EN 60268-12/A2:1995 EEN60268-12:1995 BSI 07-1999 2 Foreword to EN 60268-12:1995 The text of the International Standard IEC 268-12:1987 and its amendment 1:1991, prepared by IEC TC 84, Equipment and systems in the field of audio, video and audiovisual engineering, w
29、as approved by CENELEC as HD483.12 S2 on 1992-12-09. This Harmonization Document was submitted to the formal vote for conversion into a European Standard and was approved by CENELEC as EN60268-12 on 1994-12-06. The following date was fixed: Annexes designated “normative” are part of the body of the
30、standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Foreword to amendment 2:1995 The text of document 84(CO)163, future amendment 2 to IEC 268-12:1987, prepared by IECTC 84, Equipment and systems in the field of audio, video and audiovisual engineering, was submitt
31、ed to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 60268-12:1995 on 1994-12-06. The following dates were fixed: Contents Page Foreword 2 1 Scope 3 2 Object 3 3 General 3 4 Application and contact designation 3 Section 1. Circular connectors 5 Types of connectors an
32、d their application 3 6 Connection data 4 Section 2. Concentric connectors 7 Type of connectors and their application 5 8 Connection data 5 9 Polarity 5 Section 3. High-level connections 10 Type of connectors and their applications 6 11 Connection data 7 Annex ZA (normative) Other international publ
33、ications quoted in this standard with the references of the relevant European publications 8 Table I Circular connectors for low-level signalcircuits 3 Table II 4 Table III Concentric connectors for low-level signal circuits 5 Table IV 5 Table V Connectors for high-level circuits between amplifiers
34、and loudspeakers 6 Table VI Connection data 7 latest date by which the EN has to be implementedat national level by publication of an identical national standardor by endorsement (dop) 1995-12-01 latest date by which the amendment has to be implemented at national level by publication of an identica
35、l national standardor by endorsement (dop) 1995-12-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow)1995-12-01EN60268-12:1995 BSI 07-1999 3 1 Scope This standard applies to circular and concentric connectors to be used for the interconnection of
36、 sound system components for broadcast and similar use and gives the applications and also the contact arrangement and contact designation for these connectors. 2 Object In sound systems for broadcast and similar use it is often necessary to connect pieces of equipment from different manufacturers a
37、nd even from various countries in order to achieve desired objectives. 3 General For safety considerations, reference is required to IEC Publication 65: Safety Requirements for Mains Operated Electronic and Related Apparatus for Household and Similar General Use. NOTE 1The preferred electrical match
38、ing values for the interconnection of sound system components are given in IECPublication268-15: Sound System Equipment Part15:Preferred Matching Values for the Interconnection of Sound System Components. NOTE 2Connectors for the interconnection of sound system components for other applications are
39、dealt with in IECPublication268-11: Part 11: Application of Circular Connectors for the Interconnection of Sound System Components. NOTE 3For applications other than those given in this standard, reference is required to IEC Publications 130-8 andIECPublication130-9. At present not all connectors re
40、ferred to in this standard are included in these publications. 4 Application and contact designation For low-level circular connectors, the contact arrangement and application shall be as given in Table I and the contact designation shall be as given in Table II. For low-level concentric connectors,
41、 the contact arrangement and application shall be as given in Table III and the contact designation shall be as given in Table IV. For high-level connectors the contact arrangement and application shall be as given in Table V and the contact designation shall be as given in Table VI. Section 1. Circ
42、ular connectors 5 Types of connectors and their application Table I Circular connectors for low-level signal circuits Contact numbers as seen on the mating face of the pin connector IEC type designation Application Pin connector Free Under consideration Microphone; cordset Fixed Under consideration
43、Microphone/Output on equipment Socket connector Free Under consideration Cordset Fixed Under consideration Input on equipment Pin connector Free Under consideration Microphone; cordset Fixed Under consideration Microphone Socket connector Free Under consideration Cordset Fixed Under consideration In
44、put on equipmentEN 60268-12:1995 4 BSI 07-1999 6 Connection data Table II Application Type designation Contact No. Pin connector Socket connector 1 a 2 b 3 4 b 5 Microphone: low power audio line (cordset) Single channel (balanced) Under consideration Under consideration Screening Modulation Modulati
45、on Single channel (unbalanced) Screening and return Modulation c Single channel (balanced) phantom supplied Screening and negative pole of supply voltage Modulation and positive pole of supply voltage Modulation and positive pole of supply voltage Single channel (balanced) A-B supplied Screening Mod
46、ulation and positive pole of supply voltage Modulation and negative pole of supply voltage Two-channel (balanced) Under consideration Under consideration Screening Modulation left-hand channel Modulation left-hand channel Modulation right-hand channel Modulation right-hand channel Two-channel (unbal
47、anced) Screening and return Modulation left-hand channel c Modulation right-hand channel c Two-channel (balanced) phantom supplied Screening and negative pole of supply voltage Modulation left-hand channel and positive pole of supply voltage Modulation left-hand channel and positive pole of supply v
48、oltage Modulation right-hand channel and positive pole of supply voltage Modulation right-hand channel and positive pole of supply voltage Two-channel (balanced) A-B supplied Screening Modulation left-hand channel and positive pole of supply voltage Modulation left-hand channel and negative pole of
49、supply voltage Modulation right-hand channel and positive pole of supply voltage Modulation right-hand channel and negative pole of supply voltage a Contact No. 1 of the socket-connector makes contact first. b This contact is to be connected to the microphone terminal marked with a coloured dot. according to IEC Publication 268-4: Sound System Equipment Part 4: Microphones. c If an unbalanced amplifier input should also accept a balanced microphone, Contact No. 3 (or 3 and 5) of the ampli
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1