1、BSI Standards PublicationSpecifications for particular types of winding wiresPart 59: Polyamide-imide enamelled round copper wire, class 240BS EN 60317-59:2016National forewordThis British Standard is the UK implementation of EN 60317-59:2016. It isidentical to IEC 60317-59:2015.The UK participation
2、 in its preparation was entrusted to TechnicalCommittee L/-/99, Miscellaneous Standards - Electrical.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are resp
3、onsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 82876 8ICS 29.060.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandard
4、s Policy and Strategy Committee on 29 February 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60317-59:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60317-59 February 2016 ICS 29.060.10 English Version Specifications for particular type of windi
5、ng wires - Part 59: Polyamideimide enameled round copper wire, class 240 (IEC 60317-59:2015) Spcifications pour types particuliers de fils de bobinage - Partie 59: Fil de section circulaire en cuivre maill avec polyamide-imide, classe 240 (IEC 60317-59:2015) Technische Lieferbedingungen fr bestimmte
6、 Typen von Wickeldrhten - Teil 59: Runddrhte aus Kupfer, lackisoliert mit Polyamidimid, Klasse 240 (IEC 60317-59:2015) This European Standard was approved by CENELEC on 2015-12-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
7、 this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three of
8、ficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrote
9、chnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania
10、, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2
11、016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60317-59:2016 E BS EN 60317-59:2016EN 60317-59:2016 2 European foreword The text of document 55/1502/CDV, future edition 1 of IEC 60317-59, prepared by IEC/TC 55 “Winding wires“ wa
12、s submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-59:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-09-09 latest date by which
13、the national standards conflicting with the document have to be withdrawn (dow) 2018-12-09 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rig
14、hts. Endorsement notice The text of the International Standard IEC 60317-59:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60264 (series) NOTE Harmonized in
15、 EN 60264 (series). IEC 60317 (series) NOTE Harmonized in EN 60317 (series). IEC 60851 (series) NOTE Harmonized in EN 60851 (series). BS EN 60317-59:2016EN 60317-59:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The follo
16、wing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an I
17、nternational Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60317-0-1 2
18、013 Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire EN 60317-0-1 2014 BS EN 60317-59:2016 2 IEC 60317-59:2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 62 Normative references . 6 3 Terms, definitions, general notes an
19、d appearence 6 3.1 Terms and definitions 6 3.2 General notes . 6 3.2.1 Methods of test 6 3.2.2 Winding wire 6 3.3 Appearance . 6 4 Dimensions 7 5 Electrical resistance . 7 6 Elongation . 7 7 Springiness 7 8 Flexibility and adherence 7 9 Heat shock 7 10 Cut-through . 7 11 Resistance to abrasion . 7 1
20、2 Resistance to solvents . 8 13 Breakdown voltage. 8 14 Continuity of insulation . 8 15 Temperature index . 8 16 Resistance to refrigerants 8 17 Solderability . 9 18 Heat or solvent bonding . 9 19 Dielectric dissipation factor 9 20 Resistance to transformer oil . 9 21 Loss of mass . 9 23 Pin hole te
21、st . 9 30 Packaging 9 Bibliography 10 Table 1 Resistance to abrasion 8BS EN 60317-59:2016IEC 60317-59:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 59: Polyamide-imide enamelled round copper wire, class 240 FOREWORD 1) The Inter
22、national Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and elect
23、ronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committee
24、s; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Sta
25、ndardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has
26、representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate
27、, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional p
28、ublications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some
29、areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents inc
30、luding individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or rel
31、iance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the
32、elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60317-59 has been prepared by IEC technical committee 55: Winding wires. The text of this standard is based on the followi
33、ng documents: CDV Report on voting 55/1502/CDV 55/1529/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This International Stand
34、ard is to be read in conjunction with IEC 60317-0-1:2013. BS EN 60317-59:2016 4 IEC 60317-59:2015 IEC 2015 A list of all the parts in the IEC 60317 series, published under the general title Specifications for particular types of winding wires, can be found on the IEC website. The numbering of clause
35、s in this standard is not continuous between Clauses 20 and 30 in order to reserve space for possible future wire requirements prior to those for wire packaging. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC websit
36、e under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 60317-59:2016IEC 60317-59:2015 IEC 2015 5 INTRODUCTION This part of IEC 60317 is one of a series which deals
37、 with insulated wires used for windings in electrical equipment. The series has three groups describing: 1) Winding wires Test methods (IEC 60851 series); 2) Specifications for particular types of winding wires (IEC 60317 series); 3) Packaging of winding wires (IEC 60264 series). BS EN 60317-59:2016
38、 6 IEC 60317-59:2015 IEC 2015 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 59: Polyamide-imide enamelled round copper wire, class 240 1 Scope This part of IEC 60317 specifies the requirements of enamelled round copper winding wire of class 240 with a single coating of polyamide-imide re
39、sin. The range of nominal conductor diameters covered by this part of IEC 60317 is: grade 1: 0,180 mm up to and including 1,600 mm; grade 2: 0,180 mm up to and including 1,600 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013. 2 Normative references The following do
40、cuments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60317-0-1:2013, Spe
41、cifications for particular types of winding wires Part 0-1: General requirements Enamelled round copper wire 3 Terms, definitions, general notes and appearence3.1 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60317-0-1:2013 apply. 3.2 General notes 3
42、.2.1 Methods of test Subclause 3.2.1 of IEC 60317-0-1:2013 applies. In case of inconsistencies between IEC 60317-0-1 and this part of IEC 60317, the latter shall prevail. 3.2.2 Winding wire Class 240 is a thermal class that requires a minimum temperature index of 240 and a heat shock temperature of
43、at least 260 C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be used. This will depend on many factors, including the type of equipment involved. 3.3 Appearance Subclause 3.3 of IEC 60317-0-1:2013 applies.
44、BS EN 60317-59:2016IEC 60317-59:2015 IEC 2015 7 4 Dimensions Clause 4 of IEC 60317-0-1:2013 applies. 5 Electrical resistance Clause 5 of IEC 60317-0-1:2013 applies. 6 Elongation Clause 6 of IEC 60317-0-1:2013 applies. 7 Springiness Clause 7 of IEC 60317-0-1:2013 applies. 8 Flexibility and adherence
45、Clause 8 of IEC 60317-0-1:2013 applies. For 8.4, Peel test, the constant K used for the calculation of the number of revolutions shall be 75 mm. 9 Heat shock Clause 9 of IEC 60317-0-1:2013 applies. The minimum heat shock temperature shall be 260 C. 10 Cut-through No failure shall occur within 2 min
46、at 450 C. 11 Resistance to abrasion For nominal conductor diameters from 0,250 mm up to and including 1,600 mm, the wire shall meet the requirements given in Table 1. For intermediate nominal conductor diameters, the value of the next larger nominal conductor diameter applies. BS EN 60317-59:2016 8
47、IEC 60317-59:2015 IEC 2015 Table 1 Resistance to abrasion Grade 1 Grade 2 Nominal conductor diameter Minimum average force to failure Minimum force to failure of each measurement Minimum average force to failure Minimum force to failure of each measurement mm N N N N 0,250 3,00 2,55 4,90 4,15 0,280
48、3,25 2,75 5,25 4,45 0,315 3,50 2,95 5,65 4,80 0,355 3,75 3,20 6,05 5,15 0,400 4,05 3,45 6,50 5,50 0,450 4,35 3,70 7,00 5,90 0,500 4,65 3,95 7,50 6,350,560 5,00 4,25 8,00 6,80 0,630 5,35 4,55 8,60 7,30 0,710 5,70 4,85 9,20 7,80 0,800 6,10 5,15 9,90 8,40 0,900 6,55 5,55 10,60 9,00 1,000 7,05 5,95 11,3
49、0 9,60 1,120 7,60 6,45 12,10 10,20 1,250 8,20 6,95 12,90 11,001,400 8,80 7,45 13,90 11,80 1,600 9,45 8,00 14,90 12,60 12 Resistance to solvents Clause 12 of IEC 60317-0-1:2013 applies. 13 Breakdown voltage Clause 13 of IEC 60317-0-1:2013 applies. The elevated temperature shall be 240 C. 14 Continuity of insulationClause 14 of IEC 60317-0-1:2013 applies. 15 Temperature index Clause 15 of IEC 60317-0-1:2013 applies. The minimum temperature index shall be 240. 16 Resistance to refriger
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1