BS EN 60335-2-17-2013 Household and similar electrical appliances Safety Particular requirements for blankets pads clothing and similar flexible heating appliances《家用和类似用途电器 安全性 电热.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHousehold and similar electrical appliances Safety Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliancesBS EN 60335-2-17:2013Nat

2、ional forewordThis British Standard is the UK implementation of EN 60335-2-17:2013. It isidentical to IEC 60335-2-17:2012. It supersedes BS EN 60335-2-17:2002+A2:2009 which will be withdrawn on 30 April 2015.The UK participation in its preparation was entrusted by Technical CommitteeCPL/61, Safety o

3、f household and similar electrical appliances, toSubcommittee CPL/61/7, Safety of electrical appliances - Heated appliancegroup.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions o

4、f acontract. Users are responsible for its correct application. The British Standards Institution 2013 Published by BSI Standards Limited 2013 ISBN 978 0 580 73824 1 ICS 13.120; 97.040.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publis

5、hed under the authority of the Standards Policy and Strategy Committee on 30 April 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60335-2-17:2013EUROPEAN STANDARD EN 60335-2-17 NORME EUROPENNE EUROPISCHE NORM February 2013 CENELEC European Committee for Elec

6、trotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No.

7、 EN 60335-2-17:2013 E ICS 13.120; 97.040.50 Supersedes EN 60335-2-17:2002 + A1:2006 + A2:2009 English version Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances (IEC 60335-2-17:2012) Appareils

8、 lectrodomestiques et analogues - Scurit - Partie 2-17: Exigences particulires pour les couvertures, coussins, vtements et appareils chauffants souples analogues (CEI 60335-2-17:2012) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke - Teil 2-17: Besondere Anforderungen an Wrmezud

9、ecken, Wrmeunterbetten, Heizkissen, Kleidung und hnliche schmiegsame Wrmegerte (IEC 60335-2-17:2012) This European Standard was approved by CENELEC on 2012-04-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Sta

10、ndard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (E

11、nglish, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees

12、 of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloven

13、ia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 60335-2-17:2013EN 60335-2-17:2013 - 2 - Foreword The text of document 61/4336/FDIS, future edition 3 of IEC 60335-2-17, prepared by IEC/TC 61 “Safety of household and similar electrical appliances“ was submitted to the IEC-CENELEC

14、parallel vote and approved by CENELEC as EN 60335-2-17:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-08-22 latest date by which the national standards confli

15、cting with the document have to be withdrawn (dow) 2015-04-30 This document supersedes EN 60335-2-17:2002 + A1:2006 + A2:2009. EN 60335-2-17:2013 includes the following significant technical changes with respect to EN 60335-2-17:2002: The definition of PTC heating element has been deleted and the de

16、finition in Part 1 now applies. A definition of a heating element with PTC characteristics has been introduced instead (3.117). This has resulted in editorial changes to 5.7, 5.8.2, 7.1, 10.101, 11.2, 21.105, 21.111.1 and 21.112. The allowance for class I appliances has been deleted and requirements

17、 for appliances incorporating a functional earth have been incorporated (6.1, 7.1, 22.115). The working voltage of parts of class III construction is limited to 24 V (22.26). Some notes have been deleted or converted to normative text (3.107, 3.111, 3.113, 5.2, 5.3, 5.8.2, 11.8, 11.101, 11.102, 15.1

18、, 15.101, 19.1, 19.13, 19.102, 19.103, 19.105, 19.106, 19.108, 19.109, 19.110, 19.111, 19.112, 21.1, 21.102, 21.103, 21.109, 21.110.3, 21.111.1, 21.111.2, 21.111.3, 21.112, 22.103, 22.114, 25.23, Annex AA, Annex CC 3.1.9, 19.201, 19.203). Modification of the marking requirements (7.1, 7.14, 7.15). M

19、odification of the instructions (7.12). Clarification of the heat stroke test (11.101). The figure numbers have been updated to take into account deletion of Figure 103 in EN 60335-2-17:2002. This part 2 is to be used in conjunction with EN 60335-1:2012. NOTE 1 When “Part 1” is mentioned in this sta

20、ndard, it refers to EN 60335-1. This part 2 supplements or modifies the corresponding clauses in EN 60335-1, so as to convert that publication into the European Standard: Safety requirements for blankets, pads, clothing and similar flexible heating appliances. When a particular subclause of Part 1 i

21、s not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numb

22、ered starting from 101 are additional to those in Part 1; BS EN 60335-2-17:2013- 3 - EN 60335-2-17:2013 unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc.

23、 NOTE 3 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. Attention is d

24、rawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Design

25、ed for Use within Certain Voltage Limits (LVD - 2006/95/EC) Endorsement notice The text of the International Standard IEC 60335-2-17:2012 was approved by CENELEC as a European Standard without any modification. Add to the bibliography of EN 60335-1:2012: In the official version, for Bibliography, th

26、e following notes have to be added for the standards indicated: IEC 60335-2-66 NOTE Harmonized as EN 60335-2-66. IEC 60335-2-71 NOTE Harmonized as EN 60335-2-71. IEC 60335-2-81 NOTE Harmonized as EN 60335-2-81. IEC 60601-2-35 NOTE Harmonized as EN 60601-2-35. BS EN 60335-2-17:2013EN 60335-2-17:2013

27、- 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cit

28、ed applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Addition to Annex ZA of EN 60335-1:2012:Publication

29、Year Title EN/HD Year IEC 60320-1 + A1 2001 2007 Appliance couplers for household and similar general purposes - Part 1: General requirements EN 60320-1 + A1 2001 2007 ISO 2439 - Flexible cellular polymeric materials - Determination of hardness (indentation technique) EN ISO 2439 - ISO 3758 2005 Tex

30、tiles - Care labelling code using symbols EN ISO 3758 20051)ISO/IEC Guide 37 - Instructions for use of products of consumer interest - - 1)EN ISO 3758:2005 is superseded by EN ISO 3758:2012. BS EN 60335-2-17:2013 2 60335-2-17 IEC:2012 CONTENTS INTRODUCTION . 7 1 Scope . 8 2 Normative references . 9

31、3 Terms and definitions . 9 4 General requirement . 11 5 General conditions for the tests 11 6 Classification 13 7 Marking and instructions . 13 8 Protection against access to live parts 16 9 Starting of motor-operated appliances 16 10 Power input and current . 16 11 Heating 16 12 Void 18 13 Leakage

32、 current and electric strength at operating temperature 18 14 Transient overvoltages . 19 15 Moisture resistance 19 16 Leakage current and electric strength . 20 17 Overload protection of transformers and associated circuits . 21 18 Endurance 21 19 Abnormal operation 21 20 Stability and mechanical h

33、azards . 25 21 Mechanical strength . 25 22 Construction . 32 23 Internal wiring . 34 24 Components . 34 25 Supply connection and external flexible cords 35 26 Terminals for external conductors . 36 27 Provision for earthing . 36 28 Screws and connections . 36 29 Clearances, creepage distances and so

34、lid insulation 36 30 Resistance to heat and fire . 36 31 Resistance to rusting 39 32 Radiation, toxicity and similar hazards 39 Annexes . 50 Annex A (informative) Routine tests . 50 Annex AA (normative) Specification for the thermal insulation 52 Annex BB (normative) Equipment for the mechanical str

35、ength test for blankets . 53 Annex CC (normative) Clothing 56 Bibliography 59 BS EN 60335-2-17:201360335-2-17 IEC:2012 3 Figure 101 Symbol for “Do not use folded or rucked“ . 39 Figure 102 Symbol for “Do not insert pins“ . 39 Figure 103 Arrangement for measuring leakage current and electric strength

36、 of the flexible part . 40 Figure 104 Arrangement for the three-thickness fold test . 41 Figure 105 Examples showing the position of the thermal insulation on ruck-resistant blankets and mattresses . 42 Figure 106 Examples of folds and the position of the thermal insulation on pads 43 Figure 107 Tum

37、bling barrel for testing the mechanical strength of pads 44 Figure 108 Impact apparatus for testing enclosures of moisture-proof appliances 45 Figure 109 Shape of the sample for the tear resistance test . 46 Figure 110 Equipment for flexing heating elements and internal wiring 46 Figure 111 Arrangem

38、ent for the rigidity test of ruck-resistant blankets . 47 Figure 112 Equipment for the spark ignition test 48 Figure 113 Equipment for the spark ignition test Details of the mask . 49 Figure BB.1 Equipment for the mechanical strength test of blankets 54 Figure BB.2 Detail of the drum and cylinders .

39、 55 Figure BB.3 Detail of the clamping bar . 55 Table 101 Maximum temperatures . 17 Table 102 Maximum temperature rises. 17 Table A.101 Test voltages . 50 BS EN 60335-2-17:201360335-2-17 IEC:2012 7 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of

40、its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the m

41、anufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that ther

42、e is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to ea

43、ch function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees res

44、ponsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal a

45、nd generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable, since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of tempe

46、rature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principle

47、s of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and te

48、sted according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. BS EN 60335-2-17:2013 8 60335-2-17 IEC:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-17: Particular requirements for blankets, pads, clothing

49、 and similar flexible heating appliances 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric blankets, pads, clothing and other flexible appliances that heat the bed or human body, for household and similar purposes, their rated voltage being not more than 250 V. This standard also applies to control units supplied with the appliance. Appliances not intended for normal household